other
Products
Siemens 6ES7151-3AA22-0AB0 IM151-3 PN interface module product image
Siemens 6ES7151-3AA22-0AB0 IM151-3 PN interface module product image
Siemens 6ES7151-3AA22-0AB0 IM151-3 PN interface module product image

Siemens 6ES7151-3AA22-0AB0 IM151-3 PN interface module

EMAIL SALES
ET 200S PROFINET
6ES7151-3AA22-0AB0 — IM151-3 PN interface module

Connect an ET 200S station to a PROFINET IO controller with this IM151-3 PN interface. Its two copper Ethernet ports support a line connection while the configured I/O station remains under controller supervision.

SiemensET 200S PROFINETIM151-3 PNTwo RJ45 ports, 100BASE-TX
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7151-3AA22-0AB0 product profile
ManufacturerSiemens
Exact model6ES7151-3AA22-0AB0
Product typeIM151-3 PN interface module
Product familyET 200S PROFINET
Primary roleConnects distributed I/O to PROFINET
Interface contextTwo RJ45 ports, 100BASE-TX
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7151-3AA22-0AB0
6ES7151-3AA22-0AB0 configuration inquiry

Get a precise quote for 6ES7151-3AA22-0AB0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IM151-3 PN interface module configuration

Two copper RJ45 ports provide the 100BASE-TX station connection. Check the configured I/O assembly, the 24 V DC supply and the saved station identity when selecting the interface.

Control-system purposeConnects distributed I/O to PROFINET.
Connection arrangementTwo RJ45 ports, 100BASE-TX.
Installation planningProvide the specified 24 V DC supply and verify polarity at the station terminals.
Commissioning evidenceCheck the complete ordering code, hardware version and installed firmware before assuming later interface functions are available.

Engineering selection points

  • Physical interface: 2 × RJ45, 100BASE-TX.
  • Rated supply: 24 V DC.
  • Current consumption: Approximately 200 mA.
  • Power dissipation: Approximately 2 W.
Official product data

6ES7151-3AA22-0AB0 key specifications

Interface designationIM151-3 PN
Field networkPROFINET IO
Physical interface2 × RJ45, 100BASE-TX
Rated supply24 V DC
Current consumptionApproximately 200 mA
Power dissipationApproximately 2 W
Module width60 mm

Siemens IM151-3 PN equipment manual; use the limits applicable to this ordering code and installed version.

Pre-order check 01

Installation environment

Check the mounting, connection and operating conditions for this exact configuration before installation.

  • Isolate the station supply before changing the interface or its terminal connections.
  • Provide the specified 24 V DC supply and verify polarity at the station terminals.
  • Use industrial Ethernet cable and secure the RJ45 connections against cable strain.
  • Retain the prescribed station assembly, shielding and end termination when replacing the interface.
Record the installed arrangement and the final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete item to its field interface, mechanical arrangement and configured system.

Station architecture
Use with the ET 200S station arrangement and electronic-module configuration selected in the controller project.
Controller network
The host must provide a correctly engineered PROFINET IO controller connection.
Copper connection
Match the two RJ45 100BASE-TX interfaces to the plant copper Ethernet network.
Configuration identity
Keep the device name, controller assignment and station configuration consistent with the replacement plan.
Hardware revision
Check the complete ordering code, hardware version and installed firmware before assuming later interface functions are available.
Confirm the controller project, station power arrangement and complete hardware label before replacement.
Recommended model families

More Siemens models

Siemens selections 01Siemens 6ES7143-5BF00-0BA0Siemens 6ES7144-5KD00-0BA0Siemens 6ES7144-4PF00-0AB0

Match the complete ordering code and installed-system requirements before selection.

Siemens selections 02Siemens 6ES7144-4JF00-0AB0Siemens 6ES7144-4FF01-0AB0Siemens 6ES7144-1JB31-0XB0

Match the complete ordering code and installed-system requirements before selection.

Siemens selections 03Siemens 6ES7144-1GB31-0XB0Siemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0

Match the complete ordering code and installed-system requirements before selection.

Siemens selections 04Siemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02

Match the complete ordering code and installed-system requirements before selection.

Additional published brands

Additional Advantage Models

Additional selections 01Bently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 02Bently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 03Bently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 04Bently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 05Bently Nevada 330906-02-12-10-02-05Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 06Bently Nevada 330851-01-000-020-10-00-00Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 07Bently Nevada 330180-X1-05 MOD 145004-75Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02

Match the complete ordering code and installed-system requirements before selection.

Additional selections 08Bently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02Bently Nevada 129716-XXX-040-15 MOD 166797-0133Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02

Match the complete ordering code and installed-system requirements before selection.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7151-3AA22-0AB0 Order Guide

Match the complete configuration to the installed requirement before finalizing the order.
1Confirm the exact item6ES7151-3AA22-0AB0 — IM151-3 PN interface module.
2Check the field interfaceTwo RJ45 ports, 100BASE-TX.
3Review the installationIsolate the station supply before changing the interface or its terminal connections.
4Match the configured systemUse with the ET 200S station arrangement and electronic-module configuration selected in the controller project.
5Agree the supplied scopeConfirm the requested quantity, condition, package contents and destination with the quotation.
6Plan a controlled acceptanceConfirm the controller project, station power arrangement and complete hardware label before replacement.

Middle East Demand & Specialist Models

Selected published product references for regional projects and installed-system maintenance.

Published references for regional project selection.
Confirm the exact part number before ordering.
Siemens6ES7143-5BF00-0BA0

8-channel mixed 24 VDC digital I/O module. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES7144-5KD00-0BA0

4-channel universal analog input module. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES7144-4PF00-0AB0

4-channel high-feature thermocouple input module. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES7144-4JF00-0AB0

4-channel high-feature RTD analog input module. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES7144-4FF01-0AB0

4-channel high-feature analog voltage input module. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES7144-1JB31-0XB0

2-channel resistance-temperature input expansion module. Match the complete configuration and supplied scope.

Specialist brand
Nordwel customer support

Company Services & FAQ

Configuration and order support for Siemens 6ES7151-3AA22-0AB0.

Company services

Model & configuration checkReview the complete item and two rj45 ports, 100base-tx requirements before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7151-3AA22-0AB0 FAQ

What does 6ES7151-3AA22-0AB0 do within an ET 200S station?It provides the PROFINET IO connection between the station electronics and the configured IO controller. It is the station interface, not an independent process controller.
Does this IM151-3 PN interface use copper or optical Ethernet?This configuration uses copper Ethernet through two RJ45 interfaces with 100BASE-TX physical signalling. Optical connectors should not be specified for this item.
Why are there two network sockets on this module?The two Ethernet interfaces allow the station to be connected within the engineered network arrangement, including a line connection. Their presence does not turn the interface into an unrestricted general-purpose switch.
Which supply is specified for 6ES7151-3AA22-0AB0?The rated supply is 24 V DC. Verify polarity and the applicable station power arrangement before energizing it; an Ethernet connection does not supply the required station power.
What consumption figures should be allowed for the interface itself?The covered manual lists approximately 200 mA current consumption and approximately 2 W power dissipation. The complete station budget must also include its other modules and field loads.
How much mounting width does the interface occupy?The interface width is 60 mm. Plan the remaining station width from the selected terminal, power and electronic modules rather than treating this as the complete station dimension.
Can an interface exchange be completed without reviewing the controller project?No. The replacement must agree with the engineered station configuration and network identity. Record the device name and controller assignment before the exchange and validate the restored communication afterward.
What should be checked if the controller cannot reach the replaced station?Check the station supply, Ethernet link, device-name assignment and controller configuration. Use the interface indications and controller diagnostics to separate a network-identity problem from an I/O configuration fault.
May later IM151-3 functions be assumed on this ordering code?No. Feature availability depends on the exact hardware, firmware and engineering configuration. A later interface manual or a similar front label alone is not sufficient evidence for an added function.
What is a sensible acceptance check after installing this interface?Confirm the complete label, secured terminals and network connectors, then check controller communication and the expected I/O status under controlled operating conditions. Keep the previous station settings available for comparison.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens ET 200S PROFINET

Applications & Why Choose Nordwel

Engineering contexts for 6ES7151-3AA22-0AB0 and the available order-coordination support.

Application areas

01PROFINET machine stationsConnect distributed sensor and actuator I/O to the machine IO controller over copper Ethernet.
02Line-topology cabinet integrationUse both RJ45 connections as permitted by the engineered station network layout.
03Configured station maintenanceReplace an interface while preserving the project device identity and the existing I/O assignment.
04Controller-side fault isolationReview station diagnostics and physical links when investigating a lost distributed-I/O connection.

Why choose Nordwel

Configuration-aware supportReview the exact item, two rj45 ports, 100base-tx and installed-system requirements before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the controller project, station power arrangement and complete hardware label before replacement.
Need help matching 6ES7151-3AA22-0AB0?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp