other
Products
Bently Nevada 3500/42M 128240-01 Proximitor/Seismic I/O module with external terminations product view
Bently Nevada 3500/42M 128240-01 Proximitor/Seismic I/O module with external terminations product view
Bently Nevada 3500/42M 128240-01 Proximitor/Seismic I/O module with external terminations product view

Bently Nevada 3500/42M 128240-01 Proximitor/Seismic I/O module with external terminations

EMAIL SALES
Bently Nevada 3500/42M
3500/42M 128240-01 - Proximitor/Seismic I/O module with external terminations

3500/42M 128240-01 routes transducer signals through external terminations. Check the sensor selection as well as the blocks and cables.

Bently Nevada3500/42MExternal Prox/Seismic I/O
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
3500/42M 128240-01 product profile
ManufacturerBently Nevada
Exact model3500/42M 128240-01
TerminationExternal
Listed transducerSeismoprobe
Other input caveatProx/Accel and Velomitor not recommended
Field hardwareSeparate blocks and cables
Monitor programmingPaired channels
Verified functionExternal transducer I/O interface
  • Brand:

    Bently Nevada
  • Item NO.:

    3500/42M 128240-01
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

3500/42M 128240-01 configuration inquiry

Get a precise quote for 3500/42M 128240-01

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

3500/42M 128240-01 function and interfaces

3500/42M 128240-01 is a Proximitor/Seismic I/O module with external terminations for the 3500/42M installation. The I/O selection table lists Seismoprobe; Prox/Accel and Velomitor are supported but not recommended for this I/O type.

External Seismoprobe interfaceProvide the termination path listed for Seismoprobe input in the I/O selection table.
Sensor-selection reviewRetain the distinction between supported and recommended transducer combinations.
Rack measurement connectionRoute the chosen sensor signals to the configured front monitoring channels.
External wiring coordinationMatch the remote blocks, connection cable and physical channel assignments.

Installation and selection boundaries

  • The component is the external-termination Prox/Seismic I/O spare for this monitor installation.
  • The I/O selection table lists Seismoprobe; Prox/Accel and Velomitor are supported but not recommended for this I/O type.
  • Order the external termination blocks and connection cable separately, and preserve the required channel configuration.
Official product data

3500/42M 128240-01 key specifications

Component Prox/Seismic I/O module
Termination External terminations
I/O selection table transducer Seismoprobe
Other supported inputs Prox/Accel and Velomitor; not recommended for this I/O type
External blocks and cable Ordered separately for each I/O module
Monitor channel count Four; configured in pairs
Installed measurement role Configured vibration or position monitoring

Bently Nevada datasheet 143694 Rev. AE, pages 1 and 15-18.

Pre-order check 01

Installation environment

Preserve the approved protection arrangement while installing the correct component and field connections.

  • Record the actual transducer types and compare them with the I/O selection guidance.
  • Identify the external block, cable and channel mapping before unplugging the I/O connection.
  • Inspect connectors and restore the documented cable and shield arrangement.
  • Validate channel scaling, pair configuration and monitor response after reassembly.
Keep the installed wiring and configuration records available for controlled commissioning checks.
Pre-order check 02

Compatibility confirmation

Review the complete identity together with the fitted interfaces and installed configuration.

I/O identity
3500/42M 128240-01 external-termination Prox/Seismic assembly.
External hardware
Match the separately supplied termination blocks, cable and connector arrangement.
Transducer suitability
Seismoprobe is listed; Prox/Accel and Velomitor support carries a not-recommended qualification.
Monitor configuration
Preserve the four-channel mapping, pair programming, scaling and required measurements.
Commissioning
Coordinate monitoring availability and verify the installed signals before returning protection to service.
Match 3500/42M 128240-01 with the installed monitor, field wiring, configuration and applicable installation requirements.
Recommended model families

More Bently Nevada models

Bently Nevada selection 01Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05Bently Nevada 330103-02-04-10-02-CN

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 02Bently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CNBently Nevada 330903-00-07-10-01-CN

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 03Bently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 04Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00

Confirm the complete order code and installed-system requirements before selecting a replacement.

Additional published brands

Additional Advantage Models

General ElectricGeneral Electric IC200UAL005General Electric IC200UAL006General Electric IC200UAR028

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric IC200UDD112General Electric IC200UDD120General Electric DS200AAHAH1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200SVIAG1AGeneral Electric DS200SPCBG1AGeneral Electric DS200SLCCG2A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200SHVIG1AGeneral Electric DS200PTCTG1AGeneral Electric DS200PLIBG1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES7144-4FF01-0AB0Siemens 6ES7144-1JB31-0XB0Siemens 6ES7144-1GB31-0XB0

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0Siemens 6ES7143-4BF50-0AA0

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02Siemens 6GK1143-0AA01

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5951-7LB21Siemens 6ES5948-3UA23Siemens 6ES5948-3UA13

Confirm the complete order code and installed-system requirements before selecting a replacement.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

3500/42M 128240-01 Order Guide

Selection checks for the complete 3500/42M 128240-01 identity and installed arrangement.
1Identify the complete assemblySpecify 3500/42M 128240-01 and retain the supplied hardware revision and installed rack position.
2Map the field connectionsMatch the separately supplied termination blocks, cable and connector arrangement.
3Check the connected equipmentSeismoprobe is listed; Prox/Accel and Velomitor support carries a not-recommended qualification.
4Retain the configurationPreserve the four-channel mapping, pair programming, scaling and required measurements.
5Review site conditionsCoordinate monitoring availability and verify the installed signals before returning protection to service.
6Coordinate the replacementProvide the quantity, delivery destination and controlled verification requirements before the replacement window.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Check the complete ordering code and the installed interface requirements before selection.
General ElectricIC200BEM104

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200CHS003

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAA007

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL004

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricDS200PANAH1A

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricDS200FHVAG1A

Match the complete model, revision and required installed function before ordering.

Specialist model
Nordwel customer support

Company Services & FAQ

Practical support for 3500/42M 128240-01 selection, quotation and order coordination.

Company services

Component and installation checkReview the complete ordering identity, actual interfaces and installed configuration before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

3500/42M 128240-01 FAQ

Which transducer is listed first for 3500/42M 128240-01 selection?The I/O type table lists Seismoprobe. It also states that Prox/Accel and Velomitor inputs are supported but not recommended for this I/O type, so support should not be described as a general recommendation.
Are Prox/Accel and Velomitor the preferred inputs for 3500/42M 128240-01?No. Although the selection table says they are supported, it explicitly does not recommend them for this I/O arrangement. Match the actual sensor installation to the required I/O selection rather than relying only on the broad monitor-family description.
What field hardware must be arranged for 3500/42M 128240-01?Use external termination blocks and the matching cable, ordered separately for each I/O module. Verify the required connector style and signal assignment against the installed field wiring.
Does 3500/42M 128240-01 include internal sensor terminations?Its defined arrangement uses external terminations. Sensor wiring is brought through the chosen external blocks and cable rather than being treated as an internal-termination installation.
How many monitor channels are associated with 3500/42M 128240-01?The matched front monitor is a four-channel device. Its channels are programmed in pairs, so preserve both the field channel mapping and the required pair configuration during an I/O replacement.
Can 3500/42M 128240-01 establish alarm thresholds by itself?Alarm thresholds and measurement processing are configured in the front monitor using rack configuration software. The rear I/O provides the sensor interface, and replacing it does not by itself validate the existing alarm settings.
What needs checking if a sensor technology changes on 3500/42M 128240-01?Review the I/O selection guidance, the sensor electrical interface and the configured measurement together. A change of transducer type can require more than a connector swap, even when the front monitor supports that general measurement family.
Can existing external cables be reused with 3500/42M 128240-01 without inspection?Inspect the cable connectors, continuity, routing and channel identification before reuse. Confirm that each end reaches the intended I/O and termination block rather than assuming that a physically mating cable is correctly assigned.
Which parameter set should be restored after fitting 3500/42M 128240-01?Restore the validated sensor scaling, measurement functions, channel-pair assignments and alarm configuration of the installed monitor. Check the resulting measurements with the approved commissioning procedure before relying on them.
What should identify a 3500/42M 128240-01 quotation request?State the complete combination, the actual transducer types, external termination arrangement and required supply scope. Include whether the existing blocks and cable will be retained so the I/O spare is not mistaken for a complete monitoring package.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada 3500/42M support

Applications & Why Choose Nordwel

Engineering uses of 3500/42M 128240-01 within the matched monitoring installation.

Application areas

01Seismoprobe field connectionsConnect the sensor type listed in the I/O selection table through the designed external wiring.
02Remote seismic termination cabinetsUse separately selected external blocks and cable for an existing remote termination layout.
03Configured vibration measurementsCarry the field signals used by the matched front monitor for the approved vibration function.
04Installed transducer compatibility reviewsCheck whether the actual sensor mix agrees with the I/O selection guidance before replacement.

Why choose Nordwel

Configuration-aware supportReview the component identity, fitted interfaces and installed monitoring arrangement before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final selection depends on the complete ordering identity, hardware revision, connected interfaces and installed configuration.
Need help matching 3500/42M 128240-01 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp