other
Products
General Electric IC600CB513 Auxiliary I/O control circuit board product view
General Electric IC600CB513 Auxiliary I/O control circuit board product view
General Electric IC600CB513 Auxiliary I/O control circuit board product view

General Electric IC600CB513 auxiliary i/o control circuit board

EMAIL SALES
Series Six
IC600CB513 — Auxiliary I/O control circuit board

IC600CB513 provides the auxiliary I/O control function in applicable Series Six CPU arrangements. Compare the CPU generation and jumper/shunt configuration; a setting used by one CPU arrangement must not be copied indiscriminately to another.

General ElectricSeries SixAuxiliary I/O control circuit boardRevision-dependent CPU configuration
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC600CB513 product profile
ManufacturerGeneral Electric
Exact modelIC600CB513
Product typeAuxiliary I/O control circuit board
Product familySeries Six
Primary roleAdds an auxiliary I/O link to the CPU
Interface contextRevision-dependent CPU configuration
  • Brand:

    General Electric
  • Item NO.:

    IC600CB513
IC600CB513 configuration inquiry

Get a precise quote for IC600CB513

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

Auxiliary I/O control circuit board configuration

IC600CB513 provides the auxiliary I/O control function in applicable Series Six CPU arrangements. Compare the CPU generation and jumper/shunt configuration; a setting used by one CPU arrangement must not be copied indiscriminately to another.

System roleIC600CB513 provides the auxiliary I/O control function in applicable Series Six CPU arrangements. Compare the CPU generation and jumper/shunt configuration; a setting used by one CPU arrangement must not be copied indiscriminately to another.
Electrical integrationReview power requirements against the fitted board revision and CPU assembly.
Configuration reviewMatch DIP/shunt positions to the actual Plus or earlier Model 6000 CPU arrangement.
CommissioningCheck auxiliary-link diagnostics and the assigned field I/O after configuration restoration.

Engineering selection points

  • Hardware scope: Auxiliary I/O control circuit board.
  • System purpose: Additional I/O link for an applicable CPU.
  • Covered revision supply: 5 VDC for the documented C revision.
  • Status indicators: CHAIN OK, PARITY and ENABLED.
Official product data

IC600CB513 key specifications

Hardware scopeAuxiliary I/O control circuit board
System purposeAdditional I/O link for an applicable CPU
Covered revision supply5 VDC for the documented C revision
Status indicatorsCHAIN OK, PARITY and ENABLED
Configuration hardwareDIP/shunt arrangement matched to CPU generation

Technical reference: GEK-83507C Auxiliary I/O Control instruction sheet and GEK-96602A CPU context.

Pre-order check 01

Installation environment

Check the mounting, connection and operating conditions for this exact configuration before installation.

  • Record the CPU generation, board revision and auxiliary-link connections.
  • Isolate the CPU and connected I/O circuits before handling the board.
  • Preserve the required DIP/shunt configuration for the installed CPU.
  • Check link indications and controlled field I/O before normal system operation.
Record the installed arrangement and the final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete item to its field interface, mechanical arrangement and configured system.

Complete item
Retain IC600CB513 and record the supplied board revision.
Installed assembly
Revision-dependent CPU configuration.
Electrical conditions
Review power requirements against the fitted board revision and CPU assembly.
Configuration
Match DIP/shunt positions to the actual Plus or earlier Model 6000 CPU arrangement.
Acceptance
Check auxiliary-link diagnostics and the assigned field I/O after configuration restoration.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Recommended model families

More General Electric models

General Electric selections 01General Electric DS200AAHAH1AGeneral Electric DS200SVIAG1AGeneral Electric DS200SPCBG1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 02General Electric DS200SLCCG2AGeneral Electric DS200SHVIG1AGeneral Electric DS200PTCTG1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 03General Electric DS200PLIBG1AGeneral Electric DS200PANAH1AGeneral Electric DS200FHVAG1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 04General Electric DS200FCGDH1AGeneral Electric DS200EXPSG1ABBGeneral Electric DS200EXDEG1A

Match the complete ordering code and installed-system requirements before selection.

Additional published brands

Additional Advantage Models

Additional selections 01Bently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CNBently Nevada 330903-00-07-10-01-CN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 02Bently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 03Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 04Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05 MOD 145004-75

Match the complete ordering code and installed-system requirements before selection.

Additional selections 05Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02Bently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02

Match the complete ordering code and installed-system requirements before selection.

Additional selections 06Bently Nevada 129716-XXX-040-15 MOD 166797-0133Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02vibro-meter VM600 RPS6U SIM-275D-24 200-582-200-013

Match the complete ordering code and installed-system requirements before selection.

Additional selections 07PLC 1394C-SJT10-DPLC 1336-PB-SP5APLC 700-HC14Z24

Match the complete ordering code and installed-system requirements before selection.

Additional selections 08PLC 41391-261-52PLC 20F11NC104JA0NNNNNPLC 20F11RC015JA0NNNNN

Match the complete ordering code and installed-system requirements before selection.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC600CB513 Order Guide

Match the complete configuration to the installed requirement before finalizing the order.
1Confirm the exact itemIC600CB513 — Auxiliary I/O control circuit board.
2Check the field interfaceRevision-dependent CPU configuration.
3Review the installationRecord the CPU generation, board revision and auxiliary-link connections.
4Match the configured systemRetain IC600CB513 and record the supplied board revision.
5Agree the supplied scopeConfirm the requested quantity, condition, package contents and destination with the quotation.
6Plan a controlled acceptanceMatch the complete supplied identity, board revision and installed circuit requirements before operational release.

Middle East Demand & Specialist Models

Selected published product references for regional projects and installed-system maintenance.

Published references for regional project selection.
Confirm the exact part number before ordering.
Siemens6ES5945-7UA23

CPU945 central processing unit. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5941-7UA12

CPU941 central processing unit. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5921-3WB12

CPU921 central processing unit. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5541-8AA11

CP541 L2 communication processor. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5470-4UC13

470-4 eight-channel analog output module. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5465-4UA13

465-4 sixteen-channel analog input module. Match the complete configuration and supplied scope.

Specialist brand
Nordwel customer support

Company Services & FAQ

Configuration and order support for General Electric IC600CB513.

Company services

Model & configuration checkReview the complete item and revision-dependent cpu configuration requirements before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC600CB513 FAQ

What function does IC600CB513 add to a Series Six CPU?It provides the auxiliary I/O control function for an additional I/O link in the applicable CPU arrangement. Confirm that arrangement from the installed hardware and project records.
Which hardware detail affects the jumper and shunt check?The CPU generation matters. The documented arrangement differs between a Plus CPU and earlier Model 6000 hardware, so the actual installed CPU must guide the setting.
What supply is associated with the documented C revision?The instruction-sheet context specifies 5 VDC for that revision. Check the supplied board revision before applying revision-specific electrical information.
Which indicators are useful when reviewing the auxiliary link?The board provides CHAIN OK, PARITY and ENABLED indications. Use them together with the configured link and field-signal tests.
Does the board designation promise a fixed total I/O capacity?System capacity depends on the applicable CPU, links and configuration. Establish the installed system requirement rather than assigning a universal capacity from the board designation alone.
Should replacement DIP settings always be left as received?No. Compare them with the required CPU arrangement and retained configuration. The arrival setting does not prove suitability for the installed system.
What should be retained about the auxiliary I/O cable path?Record its identity, connected rack arrangement and required link configuration before disconnection. This helps restore the intended path without mixing it with another I/O connection.
Can a good CHAIN OK indication replace field I/O tests?It does not prove every assigned field circuit responds correctly. Complete the controlled signal checks needed for the racks and application served by the auxiliary link.
How can a configuration issue be distinguished after a board change?Compare the CPU generation, board revision and DIP/shunt positions with the retained record, then review link indications. Avoid changing multiple unrelated settings while tracing the fault.
What should the IC600CB513 handover record contain?Keep the supplied revision, identified CPU arrangement, final settings and auxiliary-link test results. Record the field I/O checks that justified returning the system to operation.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series Six

Applications & Why Choose Nordwel

Engineering contexts for IC600CB513 and the available order-coordination support.

Application areas

01Auxiliary I/O expansionMaintain the additional link in its supported CPU arrangement.
02CPU-generation compatibility reviewsMatch shunt and DIP configuration to the fitted system.
03Link diagnostic assessmentRelate CHAIN OK, PARITY and ENABLED to actual operation.
04Controlled I/O restorationTest the field signals served by the restored auxiliary link.

Why choose Nordwel

Configuration-aware supportReview the exact item, revision-dependent cpu configuration and installed-system requirements before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Need help matching IC600CB513?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp