other
Products
Bently Nevada 3500/50M 133442-01 tachometer I/O module with internal terminations product view
Bently Nevada 3500/50M 133442-01 tachometer I/O module with internal terminations product view
Bently Nevada 3500/50M 133442-01 tachometer I/O module with internal terminations product view

Bently Nevada 3500/50M 133442-01 tachometer I/O module with internal terminations

EMAIL SALES
Bently Nevada 3500/50M
3500/50M 133442-01 - tachometer I/O module with internal terminations

3500/50M 133442-01 connects tachometer field wiring through internal terminations. Match the sensor and configured speed-monitoring function.

Bently Nevada3500/50MInternal tachometer I/O
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
3500/50M 133442-01 product profile
ManufacturerBently Nevada
Exact model3500/50M 133442-01
TerminationInternal
Matched monitorTwo-channel tachometer
Sensor choicesProximity probes or magnetic pickups
Configuration tool3500 Rack Configuration Software
Use restrictionNot speed control or overspeed protection
Verified functionTachometer field I/O interface
  • Brand:

    Bently Nevada
  • Item NO.:

    3500/50M 133442-01
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

3500/50M 133442-01 configuration inquiry

Get a precise quote for 3500/50M 133442-01

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

3500/50M 133442-01 function and interfaces

3500/50M 133442-01 is a tachometer I/O module with internal terminations for the 3500/50M installation. The monitor accepts proximity probes or magnetic pickups, subject to the selected function.

Speed-signal interfaceConnect field wiring for the configured tachometer measurement channels.
Internal terminal arrangementRetain the rear internal-termination wiring of the selected I/O assembly.
Function-dependent sensor matchingUse a transducer appropriate to the configured speed, acceleration or direction function.
Monitoring-data integrationSupport the installed monitoring and annunciation arrangement without turning it into a speed-control system.

Installation and selection boundaries

  • The component is the internal-termination I/O spare for the matched two-channel tachometer installation.
  • The monitor accepts proximity probes or magnetic pickups, subject to the selected function.
  • Do not use the tachometer independently or as a component of speed control or overspeed protection.
Official product data

3500/50M 133442-01 key specifications

Component Tachometer I/O module
Termination arrangement Internal terminations
Associated monitor channels Two
Monitor signal sources Proximity probes or magnetic pickups; function-dependent
Installed measurements Rotative speed, rotor acceleration or rotor direction
Configuration 3500 Rack Configuration Software
Safety restriction Not for speed control or overspeed protection
Analog output use Logging, chart recording or display only
Magnetic pickup restriction Not for reverse-rotation or zero-speed options

Bently Nevada datasheet 141538 Rev. V, pages 1-2 and 8-9.

Pre-order check 01

Installation environment

Preserve the approved protection arrangement while installing the correct component and field connections.

  • Identify the internal sensor wiring and the function selected for each tachometer channel.
  • Reject magnetic pickups where the required configuration is zero speed or reverse rotation.
  • Keep monitoring outputs separate from any speed-control or overspeed-protection function.
  • Verify the configured measurement and any rack reference or recording connection after the I/O is fitted.
Keep the installed wiring and configuration records available for controlled commissioning checks.
Pre-order check 02

Compatibility confirmation

Review the complete identity together with the fitted interfaces and installed configuration.

I/O component
3500/50M 133442-01 with internal terminations.
Field wiring
Restore the internal terminal assignment for the two-channel tachometer installation.
Sensor selection
Match proximity probe or magnetic pickup to the selected function; observe the zero-speed/reverse restrictions.
Configured functions
Retain speed, acceleration, direction, Keyphasor and recording settings as actually used.
Use boundary
Monitoring and annunciation only; not speed control or overspeed protection.
Match 3500/50M 133442-01 with the installed monitor, field wiring, configuration and applicable installation requirements.
Recommended model families

More Bently Nevada models

Bently Nevada selection 01Bently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CNBently Nevada 330903-00-07-10-01-CN

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 02Bently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 03Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 04Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Additional published brands

Additional Advantage Models

General ElectricGeneral Electric IC200UDD112General Electric IC200UDD120General Electric DS200AAHAH1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200SVIAG1AGeneral Electric DS200SPCBG1AGeneral Electric DS200SLCCG2A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200SHVIG1AGeneral Electric DS200PTCTG1AGeneral Electric DS200PLIBG1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200PANAH1AGeneral Electric DS200FHVAG1AGeneral Electric DS200FCGDH1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0Siemens 6ES7143-4BF50-0AA0

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02Siemens 6GK1143-0AA01

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5951-7LB21Siemens 6ES5948-3UA23Siemens 6ES5948-3UA13

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5945-7UA23Siemens 6ES5941-7UA12Siemens 6ES5921-3WB12

Confirm the complete order code and installed-system requirements before selecting a replacement.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

3500/50M 133442-01 Order Guide

Selection checks for the complete 3500/50M 133442-01 identity and installed arrangement.
1Identify the complete assemblySpecify 3500/50M 133442-01 and retain the supplied hardware revision and installed rack position.
2Map the field connectionsRestore the internal terminal assignment for the two-channel tachometer installation.
3Check the connected equipmentMatch proximity probe or magnetic pickup to the selected function; observe the zero-speed/reverse restrictions.
4Retain the configurationRetain speed, acceleration, direction, Keyphasor and recording settings as actually used.
5Review site conditionsMonitoring and annunciation only; not speed control or overspeed protection.
6Coordinate the replacementProvide the quantity, delivery destination and controlled verification requirements before the replacement window.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Check the complete ordering code and the installed interface requirements before selection.
General ElectricIC200BEM104

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200CHS003

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAA007

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL004

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL005

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL006

Match the complete model, revision and required installed function before ordering.

Specialist model
Nordwel customer support

Company Services & FAQ

Practical support for 3500/50M 133442-01 selection, quotation and order coordination.

Company services

Component and installation checkReview the complete ordering identity, actual interfaces and installed configuration before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

3500/50M 133442-01 FAQ

What component is 3500/50M 133442-01?It is the tachometer I/O module with internal terminations. The front tachometer monitor is a separate component that processes the signals and applies the configured measurement and alarm functions.
Can 3500/50M 133442-01 be used in an overspeed-protection loop?No. The matched tachometer must not be used independently or as a component of a speed-control or overspeed-protection system. Its architecture does not provide the required protective redundancy or response speed for those duties.
Are magnetic pickups suitable for zero-speed operation with 3500/50M 133442-01?No. The documentation excludes magnetic pickups from the zero-speed and reverse-rotation options because they do not provide a clean detection edge at low speed. Select the permitted transducer for the required function.
Can the analog output associated with 3500/50M 133442-01 drive speed control?The analog proportional output is suitable only for data logging, chart recording or display. It must not be repurposed as a speed-control or overspeed-protection signal.
Which quantities can the matched 3500/50M 133442-01 installation monitor?Depending on configuration, the two-channel tachometer determines shaft rotative speed, rotor acceleration or rotor direction. Select the proper sensor and software function rather than assuming that one wiring arrangement serves every option.
Does 3500/50M 133442-01 require an external termination block?This exact spare uses internal terminations. Preserve that installed terminal layout and do not substitute the remote block-and-cable arrangement of an external-termination I/O assembly.
Can the monitor behind 3500/50M 133442-01 supply a rack timing reference?The tachometer can be configured to supply conditioned Keyphasor signals to the rack backplane for other monitors. Confirm that the installed configuration enables the required reference function before relying on it.
What does peak hold mean in a 3500/50M 133442-01 monitoring installation?The front tachometer has a resettable feature that stores the highest speed, highest reverse speed or number of reverse rotations reached by the machine. This is monitor functionality, not a separate calculation performed by the rear I/O spare.
How should speed alert setpoints be used with 3500/50M 133442-01?The stated speed alert setpoints are for annunciation. Maintain the distinction between a monitoring alarm and a dedicated protective speed-control or overspeed system during design and commissioning.
What is needed to restore 3500/50M 133442-01 after a swap?Restore the documented sensor connections, channel configuration and required reference or recording paths. Verify the selected speed-related measurement with the approved test procedure before returning the monitoring function to service.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada 3500/50M support

Applications & Why Choose Nordwel

Engineering uses of 3500/50M 133442-01 within the matched monitoring installation.

Application areas

01Shaft-speed monitoring connectionsProvide the field interface for the configured shaft-speed measurement.
02Rotor-acceleration monitoringCarry the appropriate transducer signals for the selected acceleration-monitoring function.
03Direction and zero-speed indicationSupport those configured functions only with the permitted sensor arrangement, not magnetic pickups.
04Recording and display interfacesSupport the monitoring installation whose proportional output is used only for logging, recording or display.

Why choose Nordwel

Configuration-aware supportReview the component identity, fitted interfaces and installed monitoring arrangement before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final selection depends on the complete ordering identity, hardware revision, connected interfaces and installed configuration.
Need help matching 3500/50M 133442-01 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp