other
Products
General Electric IC600BF942 4-channel bipolar analog voltage output module product view
General Electric IC600BF942 4-channel bipolar analog voltage output module product view
General Electric IC600BF942 4-channel bipolar analog voltage output module product view

General Electric IC600BF942 4-channel bipolar analog voltage output module

EMAIL SALES
Series Six
IC600BF942 — 4-channel bipolar analog voltage output module

IC600BF942 supplies four bipolar analog voltage outputs. Review both command polarities, channel configuration and connected-input loading before restoring a bidirectional analog circuit.

General ElectricSeries Six4Four -10 to +10 V analog channels
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC600BF942 product profile
ManufacturerGeneral Electric
Exact modelIC600BF942
Product type4-channel bipolar analog voltage output module
Product familySeries Six
Primary roleGenerates positive and negative voltage commands
Interface contextFour -10 to +10 V analog channels
  • Brand:

    General Electric
  • Item NO.:

    IC600BF942
IC600BF942 configuration inquiry

Get a precise quote for IC600BF942

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

4-channel bipolar analog voltage output module configuration

IC600BF942 supplies four bipolar analog voltage outputs. Review both command polarities, channel configuration and connected-input loading before restoring a bidirectional analog circuit.

System roleIC600BF942 supplies four bipolar analog voltage outputs. Review both command polarities, channel configuration and connected-input loading before restoring a bidirectional analog circuit.
Electrical integrationVerify receiver inputs accept the complete bipolar span and satisfy output loading limits.
Configuration reviewMatch the fitted revision, channel jumpers and calibrated bipolar scaling.
CommissioningTest negative, zero and positive commands without unintended machine movement.

Engineering selection points

  • Analog channels: 4.
  • Bipolar voltage span: -10 to +10 V.
  • Converter resolution: 12 bit; 1/4096.
  • Logic power: 5 VDC; 1.5 A.
Official product data

IC600BF942 key specifications

Analog channels4
Bipolar voltage span-10 to +10 V
Converter resolution12 bit; 1/4096
Logic power5 VDC; 1.5 A
Output-current specification±5 mA
Permitted load capacitance750 pF maximum
Operating temperature0–60 °C

Technical reference: GEK-83526D Analog Output instruction sheet, bipolar configuration.

Pre-order check 01

Installation environment

Check the mounting, connection and operating conditions for this exact configuration before installation.

  • Secure equipment responsive to a bipolar analog command.
  • Record channel polarity, range and calibrated application scaling.
  • Confirm receiver type, cable arrangement and revision-dependent rack conditions.
  • Check both polarities and zero before restoring unrestricted operation.
Record the installed arrangement and the final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete item to its field interface, mechanical arrangement and configured system.

Complete item
Retain IC600BF942 and record the supplied board revision.
Installed assembly
Four -10 to +10 V analog channels.
Electrical conditions
Verify receiver inputs accept the complete bipolar span and satisfy output loading limits.
Configuration
Match the fitted revision, channel jumpers and calibrated bipolar scaling.
Acceptance
Test negative, zero and positive commands without unintended machine movement.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Recommended model families

More General Electric models

General Electric selections 01General Electric DS200EXDEG1AGeneral Electric DS200DMCBG2AKGGeneral Electric DS200DMCBG2A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 02General Electric DS200ACNAG1AGeneral Electric DS200AAHAH1AGeneral Electric DS200SVIAG1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 03General Electric DS200SPCBG1AGeneral Electric DS200SLCCG2AGeneral Electric DS200SHVIG1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 04General Electric DS200PTCTG1AGeneral Electric DS200PLIBG1AGeneral Electric DS200PANAH1A

Match the complete ordering code and installed-system requirements before selection.

Additional published brands

Additional Advantage Models

Additional selections 01Siemens 6ES5541-8AA11Siemens 6ES5470-4UC13Siemens 6ES5465-4UA13

Match the complete ordering code and installed-system requirements before selection.

Additional selections 02Siemens 6ES5464-8MF21Siemens 6ES5464-8ME11Bently Nevada 330854-080-25-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 03Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00Bently Nevada 330130-075-01-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 04Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05Bently Nevada 330103-02-04-10-02-CN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 05Bently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CNBently Nevada 330903-00-07-10-01-CN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 06Bently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 07Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 08Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05 MOD 145004-75

Match the complete ordering code and installed-system requirements before selection.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC600BF942 Order Guide

Match the complete configuration to the installed requirement before finalizing the order.
1Confirm the exact itemIC600BF942 — 4-channel bipolar analog voltage output module.
2Check the field interfaceFour -10 to +10 V analog channels.
3Review the installationSecure equipment responsive to a bipolar analog command.
4Match the configured systemRetain IC600BF942 and record the supplied board revision.
5Agree the supplied scopeConfirm the requested quantity, condition, package contents and destination with the quotation.
6Plan a controlled acceptanceMatch the complete supplied identity, board revision and installed circuit requirements before operational release.

Middle East Demand & Specialist Models

Selected published product references for regional projects and installed-system maintenance.

Published references for regional project selection.
Confirm the exact part number before ordering.
Siemens6ES7143-5AH00-0BA0

16-channel 24 VDC digital I/O module. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES7143-4BF50-0AA0

4-input/4-output 24 VDC electronic module. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES7142-6BH00-0AB0

16-channel 24 VDC 1.3 A digital output device. Match the complete configuration and supplied scope.

Specialist brand
Siemens6GK1143-0TA02

CP1430 TF communication processor. Match the complete configuration and supplied scope.

Specialist brand
Siemens6GK1143-0AA01

CP143 TF communication processor. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5951-7LB21

PS951 power supply. Match the complete configuration and supplied scope.

Specialist brand
Nordwel customer support

Company Services & FAQ

Configuration and order support for General Electric IC600BF942.

Company services

Model & configuration checkReview the complete item and four -10 to +10 v analog channels requirements before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC600BF942 FAQ

Can IC600BF942 produce both voltage polarities?Yes. Its four outputs cover -10 to +10 V. Connected equipment must suit that complete bipolar command range.
What conversion resolution applies across the bipolar span?Conversion is 12 bit, corresponding to one part in 4096. Retain the intended span and scaling; digital resolution alone does not establish loop accuracy.
How should the bipolar receiving input be checked?Confirm it accepts negative and positive voltage and that its load, including the cable, meets the ±5 mA output-current specification and 750 pF maximum capacitance.
Is a positive-only voltage receiver automatically suitable?No. Such an input may not accept the negative half of this output span. Match the electrical range instead of relying on a similar analog connector.
Which power figure belongs in this module’s rack budget?Use the covered 5 VDC, 1.5 A requirement. Rack power is separate from the voltage signal delivered to each receiver.
Why is a neutral-point test useful for bipolar output?It checks zero between negative and positive commands. Confirm the resulting receiver state with the process secured before testing the rest of the span.
Should both ends of the voltage range be checked?Test representative negative and positive points as well as zero under the machine’s safe procedure. This checks polarity, scaling and receiver response across the required operation.
What role do channel jumpers play in a bipolar replacement review?They form part of channel configuration and must match the intended installation. Compare retained settings and perform calibration checks after the hardware change.
Can every rack location be accepted without considering the revision?Review actual A/B hardware and the applicable local or remote arrangement. Preserve the installed compatibility conditions rather than relying on the base designation alone.
How should a reversed analog response be traced?Compare command sign, scaling, wiring polarity and receiver interpretation. Use controlled measurements so corrective work cannot cause unexpected movement or process change.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series Six

Applications & Why Choose Nordwel

Engineering contexts for IC600BF942 and the available order-coordination support.

Application areas

01Bipolar command generationFeed compatible inputs requiring negative and positive references.
02Neutral-point calibrationValidate zero as well as both command polarities.
03Analog-loop replacementMatch receiver range and loading before reusing connections.
04Bidirectional functional testingCheck sign, scaling and response with driven equipment secured.

Why choose Nordwel

Configuration-aware supportReview the exact item, four -10 to +10 v analog channels and installed-system requirements before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Need help matching IC600BF942?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp