other
Products
Siemens 6ES7153-2BB00-0XB0 IM153-2 FO interface module product image
Siemens 6ES7153-2BB00-0XB0 IM153-2 FO interface module product image
Siemens 6ES7153-2BB00-0XB0 IM153-2 FO interface module product image

Siemens 6ES7153-2BB00-0XB0 IM153-2 FO interface module

EMAIL SALES
ET 200M optical PROFIBUS
6ES7153-2BB00-0XB0 — IM153-2 FO interface module

Use the IM153-2 FO interface for an ET 200M station on an optical PROFIBUS DP network. Preserve the configured station and the FO-specific installation details rather than applying Ethernet or copper-interface specifications.

SiemensET 200M optical PROFIBUSIM153-2 FOPROFIBUS DP optical connection
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7153-2BB00-0XB0 product profile
ManufacturerSiemens
Exact model6ES7153-2BB00-0XB0
Product typeIM153-2 FO interface module
Product familyET 200M optical PROFIBUS
Primary roleLinks an ET 200M station to optical PROFIBUS DP
Interface contextPROFIBUS DP optical connection
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7153-2BB00-0XB0
6ES7153-2BB00-0XB0 configuration inquiry

Get a precise quote for 6ES7153-2BB00-0XB0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IM153-2 FO interface module configuration

The optical PROFIBUS connection is different from both copper DP and Ethernet. Check the fibre arrangement, station configuration and power requirements against the actual FO installation.

Control-system purposeLinks an ET 200M station to optical PROFIBUS DP.
Connection arrangementPROFIBUS DP optical connection.
Installation planningCheck the 20.4-28.8 V DC supply range and correct terminal polarity.
Commissioning evidenceRecord the exact ordering code and hardware revision; do not select by a generic interface-family name alone.

Engineering selection points

  • Fieldbus protocol: PROFIBUS DP.
  • Network medium: Optical fibre.
  • Rated supply and range: 24 V DC; 20.4-28.8 V DC.
  • Maximum input current: 500 mA.
Official product data

6ES7153-2BB00-0XB0 key specifications

Interface designationIM153-2 FO
Station platformET 200M
Fieldbus protocolPROFIBUS DP
Network mediumOptical fibre
Rated supply and range24 V DC; 20.4-28.8 V DC
Maximum input current500 mA
Typical power dissipation4.5 W
Dimensions, W × H × D40 × 125 × 117 mm
MassApproximately 360 g

Siemens ET 200M manual, IM153-2 FO technical-data column; copper and Ethernet variant data are excluded.

Pre-order check 01

Installation environment

Check the mounting, connection and operating conditions for this exact configuration before installation.

  • Secure the controlled process and isolate the station supply before replacing the module.
  • Check the 20.4-28.8 V DC supply range and correct terminal polarity.
  • Protect fibre connections and preserve the optical cable routing and retention.
  • Reassemble the configured ET 200M station and verify communication and diagnostics before release.
Record the installed arrangement and the final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete item to its field interface, mechanical arrangement and configured system.

Station hardware
Match the ET 200M assembly and configured electronic modules to the controller project.
Optical DP medium
Keep the FO connection system and optical PROFIBUS network requirements.
Bus configuration
Use the supported FO data-rate and topology settings applicable to the installed version.
Electrical budget
Include the maximum input-current requirement and the complete station load.
Replacement identity
Record the exact ordering code and hardware revision; do not select by a generic interface-family name alone.
Use the optical PROFIBUS installation and the exact FO interface identity when checking replacement compatibility.
Recommended model families

More Siemens models

Siemens selections 01Siemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02Siemens 6GK1143-0AA01

Match the complete ordering code and installed-system requirements before selection.

Siemens selections 02Siemens 6ES5951-7LB21Siemens 6ES5948-3UA23Siemens 6ES5948-3UA13

Match the complete ordering code and installed-system requirements before selection.

Siemens selections 03Siemens 6ES5945-7UA23Siemens 6ES5941-7UA12Siemens 6ES5921-3WB12

Match the complete ordering code and installed-system requirements before selection.

Siemens selections 04Siemens 6ES5541-8AA11Siemens 6ES5470-4UC13Siemens 6ES5465-4UA13

Match the complete ordering code and installed-system requirements before selection.

Additional published brands

Additional Advantage Models

Additional selections 01Bently Nevada 330102-00-12-10-01-05Bently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 02Bently Nevada 330905-00-25-05-02-CNBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 03Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05Bently Nevada 330902-00-95-05-02-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 04Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00Bently Nevada 330879-03-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 05Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05 MOD 145004-75Bently Nevada 330851-02-000-080-90-01-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 06Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02Bently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02Bently Nevada 129716-XXX-040-15 MOD 166797-0133

Match the complete ordering code and installed-system requirements before selection.

Additional selections 07Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02vibro-meter VM600 RPS6U SIM-275D-24 200-582-200-013Bently Nevada 330854-080-25-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 08Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00Bently Nevada 330130-075-01-00

Match the complete ordering code and installed-system requirements before selection.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7153-2BB00-0XB0 Order Guide

Match the complete configuration to the installed requirement before finalizing the order.
1Confirm the exact item6ES7153-2BB00-0XB0 — IM153-2 FO interface module.
2Check the field interfacePROFIBUS DP optical connection.
3Review the installationSecure the controlled process and isolate the station supply before replacing the module.
4Match the configured systemMatch the ET 200M assembly and configured electronic modules to the controller project.
5Agree the supplied scopeConfirm the requested quantity, condition, package contents and destination with the quotation.
6Plan a controlled acceptanceUse the optical PROFIBUS installation and the exact FO interface identity when checking replacement compatibility.

Middle East Demand & Specialist Models

Selected published product references for regional projects and installed-system maintenance.

Published references for regional project selection.
Confirm the exact part number before ordering.
Siemens6ES5470-4UC13

470-4 eight-channel analog output module. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5465-4UA13

465-4 sixteen-channel analog input module. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5464-8MF21

464 two-channel Pt100 input module. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5464-8ME11

464-8 four-channel analog current input module. Match the complete configuration and supplied scope.

Specialist brand
Bently Nevada330854-080-25-05

armored 3300 XL 25 mm extension cable. Match the complete configuration and supplied scope.

Specialist brand
Bently Nevada330854-080-24-05

3300 XL 25 mm extension cable. Match the complete configuration and supplied scope.

Specialist brand
Nordwel customer support

Company Services & FAQ

Configuration and order support for Siemens 6ES7153-2BB00-0XB0.

Company services

Model & configuration checkReview the complete item and profibus dp optical connection requirements before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7153-2BB00-0XB0 FAQ

Does 6ES7153-2BB00-0XB0 connect to Ethernet or PROFIBUS?It is an IM153-2 FO optical PROFIBUS DP interface for an ET 200M station. It must not be specified as a PROFINET Ethernet interface.
What does FO mean for the installed network connection?It identifies the optical-fibre interface version. Fibre connection requirements and the supported optical bus arrangement must be matched to the plant installation.
Which supply-voltage range is listed for IM153-2 FO?The nominal supply is 24 V DC, with a permitted range of 20.4-28.8 V DC. Check the installed feed and terminal polarity before restoring power.
How much input current must be allowed for this module?The maximum input current is listed as 500 mA. Other station electronics and field-device loads must be included separately in the supply assessment.
What typical heat loss applies to 6ES7153-2BB00-0XB0?The listed typical dissipation is 4.5 W. Use the FO-specific value together with the other cabinet losses when evaluating the installation temperature.
What mechanical space does this interface occupy?Its listed width, height and depth are 40 × 125 × 117 mm. Include connector handling and fibre-routing space outside that module envelope.
What module mass is stated for the FO interface?The manual lists approximately 360 g. The figure is for the module and does not include the complete station or shipping package.
Can the optical bus rate be selected from a generic Ethernet specification?No. Select a data rate supported by the FO PROFIBUS configuration and the installed system. Ethernet line rates do not define the operating rate of this fieldbus interface.
What should be retained when an optical ET 200M station is serviced?Retain the controller project, station-module arrangement, configured bus settings and optical routing information. These are needed to reproduce the intended station behaviour after replacement.
What checks distinguish a fibre issue from a station-configuration problem?Inspect the optical connections and cable condition together with the interface supply, then compare station diagnostics with the configured module arrangement. A physical-link check alone does not verify the controller project.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens ET 200M optical PROFIBUS

Applications & Why Choose Nordwel

Engineering contexts for 6ES7153-2BB00-0XB0 and the available order-coordination support.

Application areas

01Optical PROFIBUS I/O stationsConnect ET 200M station electronics to the engineered optical DP network.
02Existing fibre-linked machineryMaintain the installed optical fieldbus connection without changing the communication protocol.
03FO interface replacementRestore a station using the correct optical version and saved configuration.
04Distributed-station diagnosticsInvestigate optical connection and station-configuration faults as separate engineering checks.

Why choose Nordwel

Configuration-aware supportReview the exact item, profibus dp optical connection and installed-system requirements before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Use the optical PROFIBUS installation and the exact FO interface identity when checking replacement compatibility.
Need help matching 6ES7153-2BB00-0XB0?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp