other
Products
Bently Nevada 3500/92-04-01-01 Ethernet/RS485 communication gateway product view
Bently Nevada 3500/92-04-01-01 Ethernet/RS485 communication gateway product view
Bently Nevada 3500/92-04-01-01 Ethernet/RS485 communication gateway product view

Bently Nevada 3500/92-04-01-01 Ethernet/RS485 communication gateway

EMAIL SALES
Bently Nevada 3500/92 communication gateway
3500/92-04-01-01 - Ethernet/RS485 communication gateway

3500/92-04-01-01 links rack data to Ethernet and RS485 systems. Its ordering options specify low memory and the CSA/NRTL/C approval selection.

Bently Nevada3500/92 communication gatewayEthernet / RS485 gateway
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
3500/92-04-01-01 product profile
ManufacturerBently Nevada
Exact model3500/92-04-01-01
I/O optionEthernet / RS485
MemoryLow memory
Approval optionCSA/NRTL/C
Ethernet rate10BASE-T; 10 Mbps
Register mappingConfigurable Modbus map
Verified functionRack-data communication gateway
  • Brand:

    Bently Nevada
  • Item NO.:

    3500/92-04-01-01
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

3500/92-04-01-01 configuration inquiry

Get a precise quote for 3500/92-04-01-01

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

3500/92-04-01-01 function and interfaces

3500/92-04-01-01 specifies the Ethernet/RS485 I/O option, low memory and the CSA/NRTL/C approval option. The gateway exposes rack measurements and status information to plant systems using Ethernet and serial communication. Available data depend on the installed monitor types and channel configuration.

Plant data integrationTransfer configured rack measurements and status data to the plant automation network.
Ethernet connectionUse the RJ45 10BASE-T interface for Ethernet TCP/IP and Modbus/TCP communications.
Serial data interfaceMatch the selected RS485 interface to the Modbus RTU network wiring and settings.
Register mappingAlign the gateway register selection with the plant-side interpretation of values and statuses.

Installation and selection boundaries

  • The complete suffix selects Ethernet/RS485, low memory and CSA/NRTL/C; these options must remain together in the order identity.
  • Rack data types depend on the installed monitor modules and their channel configuration.
  • The general temperature rating and the conditions of a hazardous-area installation are separate checks.
Official product data

3500/92-04-01-01 key specifications

I/O selection 04: Ethernet/RS485 Modbus I/O
Memory selection 01: Low memory
Approval selection 01: CSA/NRTL/C
Ethernet physical link RJ45, 10BASE-T, 10 Mbps
Ethernet protocols Ethernet TCP/IP and Modbus/TCP
Serial Modbus mode RTU
Rack data collection Configuration-dependent; no more than 1 second
General operating range -30 to +65 degrees C
Humidity 95%, non-condensing

Bently Nevada datasheet 141542 Rev. N, pages 1-5.

Pre-order check 01

Installation environment

Check the selected communication hardware, network wiring and site approval conditions as one installation.

  • Provide the associated full-height front and rear rack positions for the gateway and its selected I/O hardware.
  • Use the RJ45 10BASE-T Ethernet connection and the selected RS485 field interface, not wiring intended for a different serial option.
  • Keep the installation non-condensing and within the applicable temperature/approval limits.
  • Preserve the approved grounding, cable routing and rack configuration while changing network connections.
Keep the installed wiring and configuration records available for controlled commissioning checks.
Pre-order check 02

Compatibility confirmation

Review the complete identity together with the fitted interfaces and installed configuration.

Complete order identity
3500/92-04-01-01 with all three option groups retained.
Network hardware
Ethernet plus RS485; match the actual I/O module and serial wiring.
Protocol and map
Modbus/TCP or serial Modbus RTU as applicable; align the selected registers with the plant system.
Data availability
Check installed monitor type, channel configuration and the required values/statuses.
Approval / firmware
Match the supplied approval label and installation conditions; check firmware compatibility when changing I/O hardware.
Retain the selected Ethernet/RS485 interface, memory option and approval identity together when checking the installed gateway.
Recommended model families

More Bently Nevada models

Bently Nevada selection 01Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05Bently Nevada 330902-00-95-05-02-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 02Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00Bently Nevada 330879-03-00

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 03Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05Bently Nevada 330851-02-000-080-90-01-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 04Bently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Confirm the complete order code and installed-system requirements before selecting a replacement.

Additional published brands

Additional Advantage Models

General ElectricGeneral Electric DS200SPCBG1AGeneral Electric DS200SLCCG2AGeneral Electric DS200SHVIG1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200PTCTG1AGeneral Electric DS200PLIBG1AGeneral Electric DS200PANAH1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200FHVAG1AGeneral Electric DS200FCGDH1AGeneral Electric DS200EXPSG1ABB

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric IC200BEM104General Electric IC200CHS003General Electric IC200UAA007

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6GK1143-0TA02Siemens 6GK1143-0AA01Siemens 6ES5951-7LB21

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5948-3UA23Siemens 6ES5948-3UA13Siemens 6ES5945-7UA23

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5941-7UA12Siemens 6ES5921-3WB12Siemens 6ES5541-8AA11

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES7143-5BF00-0BA0Siemens 6ES7144-5KD00-0BA0Siemens 6ES7144-4PF00-0AB0

Confirm the complete order code and installed-system requirements before selecting a replacement.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

3500/92-04-01-01 Order Guide

Selection checks for the complete 3500/92-04-01-01 identity and installed arrangement.
1Keep every option groupRequest 3500/92-04-01-01 without dropping or changing any of its three option groups.
2Confirm the I/O interfaceMatch Ethernet and RS485 network hardware to the selected communication option.
3List required rack dataIdentify the measurements, module states and alarm states needed by the receiving system.
4Review register interpretationRecord the current register selection, engineering units and plant-side mapping.
5Check approvals and firmwareMatch site requirements, the supplied label and compatibility with the installed I/O hardware.
6Provide order detailsSend the complete code, quantity, required configuration and delivery information.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Check the complete ordering code and the installed interface requirements before selection.
General ElectricIC200UAL004

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL005

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL006

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAR028

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UDD112

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UDD120

Match the complete model, revision and required installed function before ordering.

Specialist model
Nordwel customer support

Company Services & FAQ

Practical support for 3500/92-04-01-01 selection, quotation and order coordination.

Company services

Component and installation checkReview the complete ordering identity, actual interfaces and installed configuration before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

3500/92-04-01-01 FAQ

What does option 04 select in 3500/92-04-01-01?It selects the Ethernet/RS485 Modbus I/O arrangement. The serial field interface is RS485 for this code; selecting network cables and wiring from a different serial option would not preserve the requested configuration.
Which memory option is encoded in 3500/92-04-01-01?The middle option 01 means low memory. Keep that option in the complete ordering code and match the installed gateway requirement rather than assuming an unspecified memory configuration.
Which approval selection belongs to 3500/92-04-01-01?The final 01 selects CSA/NRTL/C. Verify the supplied unit label and the applicable installation conditions for the site; the option code alone does not remove the need to check the actual approved installation.
What Ethernet connection does 3500/92-04-01-01 use?An RJ45 connection supports 10BASE-T Ethernet at 10 Mbps. Match the network path and cabling to that physical interface instead of assuming a faster Ethernet rating from the connector shape.
Can 3500/92-04-01-01 communicate over serial and Ethernet Modbus?The selected hardware provides RS485 for serial Modbus RTU and Ethernet for Modbus/TCP. Configure the corresponding network parameters and register mapping for the interface used by the plant system.
How quickly does 3500/92-04-01-01 collect the rack data?Data collection depends on the rack configuration but does not exceed one second for all modules in the rack. Treat this as the rack collection specification, not a guarantee of the end-to-end response time of a separate plant network.
Why might a requested value be absent from a 3500/92-04-01-01 data map?The values returned depend on the monitor module type and channel configuration. Check that the rack actually generates the required variable and that the receiving system reads the configured register for that variable.
Does 3500/92-04-01-01 require the old fixed primary-value register layout?The gateway includes a Configurable Modbus Register Utility. Match its configured register layout to the plant-side data interpretation instead of assuming that an older fixed mapping will transfer unchanged.
What temperature limit should an engineer check for 3500/92-04-01-01?The general main/I/O operating range is -30 to +65 degrees C. Hazardous-area T4 installations have their own stated ambient conditions, including -20 to +65 degrees C in the applicable approval listing, so use the supplied label and installation requirements together.
What is important when replacing I/O hardware behind 3500/92-04-01-01?Check the selected Ethernet/RS485 hardware against the existing gateway firmware. Older gateway modules can require a firmware upgrade for a new I/O module; preserve the configured network settings and register map during the change.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada 3500/92 communication gateway support

Applications & Why Choose Nordwel

Engineering uses of 3500/92-04-01-01 within the matched monitoring installation.

Application areas

01Rack-to-plant Modbus integrationMake configured measurements and statuses available to the receiving plant system.
02Ethernet-connected monitoring networksUse the 10BASE-T network path for supported Ethernet communication with the rack.
03RS485 serial installationsServe the selected serial Modbus interface within a correctly wired and configured network.
04Gateway replacement with mapping continuityPreserve the complete options and the existing data-map interpretation during a controlled replacement.

Why choose Nordwel

Configuration-aware supportReview the component identity, fitted interfaces and installed monitoring arrangement before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final selection depends on the complete ordering identity, hardware revision, connected interfaces and installed configuration.
Need help matching 3500/92-04-01-01 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp