other
Products
ABB ZINT-592 3AXD50000037931 preloaded rated main interface board for CCU-24
ABB ZINT-592 3AXD50000037931 preloaded rated main interface board for CCU-24
ABB ZINT-592 3AXD50000037931 preloaded rated main interface board for CCU-24

ABB ZINT-592 3AXD50000037931 rated CCU-24 main interface board

EMAIL SALES
ABB 580-series drives
ZINT-592 3AXD50000037931 - rated CCU-24 main interface board

ZINT-592 3AXD50000037931 is a preloaded main interface board for CCU-24. Match its fixed RatingID to the R8-R9 drive module.

ABB580-series drivesRated CCU-24 interface board
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
ZINT-592 3AXD50000037931 product profile
Product familyACS580 / ACH580 / ACQ580
Exact modelZINT-592 3AXD50000037931
Control-unit compatibilityCCU-24 only
Drive-module framesR8-R9
Software conditionAfter week 25/2017: v2.03.0.4 or later
Supplied configurationPUtype and RatingID preloaded
  • Brand:

    ABB
  • Item NO.:

    3AXD50000037931
ZINT-592 3AXD50000037931 configuration inquiry

Get a precise quote for ZINT-592 3AXD50000037931

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

ZINT-592 3AXD50000037931 functions and interfaces

ZINT-592 3AXD50000037931 is the rated service version of the main interface board used in ACS580, ACH580 and ACQ580 R8-R9 modules with a CCU-24 control unit. It arrives with PUtype and RatingID preloaded. RatingID cannot be changed afterwards, so selecting the correct installed-drive configuration is essential before replacement. For equipment manufactured after week 25/2017, the CCU-24 software must be version 2.03.0.4 or later.

Operating scopeMain interface-board service within the supported drive module; not a complete drive or control unit.
Mating arrangementThe fitted control unit must be CCU-24. A CCU-12 installation requires a control-unit change.
Host platformsThe stated application is ACS580, ACH580 and ACQ580 modules in frames R8-R9.
Configuration selectionPUtype and RatingID are supplied preloaded; the correct rating must be selected before installation.

Installation and selection boundaries

  • Confirm the complete service ordering code and the fitted drive identification before quotation.
  • Check the drive module frame and the actual control-unit type rather than relying on board appearance.
  • For equipment manufactured after week 25/2017, verify CCU-24 software version 2.03.0.4 or later.
Official product data

ZINT-592 3AXD50000037931 key specifications

Board role MC main interface board
Compatible control unit CCU-24 only
Supported drive platforms ACS580, ACH580 and ACQ580
Supported module frames R8-R9
Software qualification After manufacturing week 25/2017: CCU-24 v2.03.0.4 or later
Delivered configuration Correct PUtype and RatingID preloaded
RatingID adjustment Cannot be changed afterwards
Product net weight 0.4 kg
Gross / package level 1 weight 0.411 kg

Selection requires the correct drive rating and control-unit configuration before the board is ordered.

Pre-order check 01

Installation environment

Check the installed drive configuration before scheduling replacement of this rated interface board.

  • Identify the fitted control unit and confirm CCU-24; do not treat an existing CCU-12 as a direct fit.
  • Verify that the host drive is one of the supported platforms and its module frame is R8 or R9.
  • Check the manufacturing date and the applicable CCU-24 software condition before fitting the spare.
  • Confirm that the preloaded PUtype and RatingID match the intended drive before installation.
Keep the approved field drawing and installation records available during verification.
Pre-order check 02

Compatibility confirmation

Match the complete component identity with the fitted interfaces and installed configuration.

Control hardware
CCU-24 is required. An installation with CCU-12 needs the control unit replaced with CCU-24.
Platform application
Used as the main interface board in ACS580, ACH580 and ACQ580 modules.
Mechanical frame context
The specified drive-module application is R8-R9; a matching board name alone is not a frame check.
Software timing
After manufacturing week 25/2017, CCU-24 software must be v2.03.0.4 or later.
Loaded rating
PUtype and RatingID are preloaded for the selected rating. RatingID cannot be changed afterwards.
Approve the fitted control unit, frame, software condition and required preloaded rating together before replacement.
Recommended model families

More ABB models

ABB selection 01ABB V18345-1010261001ABB 3HAC061275-001ABB PM5132-T-ETH

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

ABB selection 02ABB PM5112-R-ETHABB PM5072-T-ETHABB PM5072-R-ETH

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

ABB selection 03ABB IM60ABB SDCS-UCM-1-COAT 3ADT220090R0008ABB IIMKM02A

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

ABB selection 04ABB DO525ABB CM576-PNIOABB DI525

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

Additional published brands

Additional Advantage Models

General ElectricGeneral Electric IC200UDR040General Electric IC200UDR064General Electric IC200UDR120

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

General ElectricGeneral Electric IC200UDR140General Electric IC200UDR164General Electric IC200UDR228

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

General ElectricGeneral Electric IC200UDR440General Electric IC200UEC008General Electric IC200UEC108

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

General ElectricGeneral Electric IC200BEM104General Electric IC200CHS003General Electric IC200UAA007

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

Bently NevadaBently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Confirm the complete order code, fitted interfaces and installed-system requirements before replacement.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

ZINT-592 3AXD50000037931 Order Guide

Selection and replacement checks for the complete ZINT-592 3AXD50000037931 ordering identity.
1Identify the rated service itemQuote the complete ZINT-592 3AXD50000037931 identity, not only the board name printed on the PCB.
2Record the host driveProvide the installed drive designation and confirm its supported R8-R9 module frame.
3Confirm the control unitCheck the actual controller is CCU-24 and identify any CCU-12 conversion requirement.
4Check the software conditionRecord the manufacturing week and CCU-24 software version against the stated date-dependent requirement.
5Specify the required ratingInclude the installed-drive PUtype and RatingID in the order review before the rated board is selected.
6Agree the supply scopeConfirm quantity, the rated interface-board scope and the installation schedule in the quotation.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Check the complete ordering identity, fitted interfaces and application requirements before selection.
Siemens6ES7143-5BF00-0BA0

Match the complete model, revision and required installed function before ordering.

Specialist model
Siemens6ES7144-5KD00-0BA0

Match the complete model, revision and required installed function before ordering.

Specialist model
Siemens6ES7144-4PF00-0AB0

Match the complete model, revision and required installed function before ordering.

Specialist model
Siemens6ES7144-4JF00-0AB0

Match the complete model, revision and required installed function before ordering.

Specialist model
Siemens6ES7144-4FF01-0AB0

Match the complete model, revision and required installed function before ordering.

Specialist model
Siemens6ES7144-1JB31-0XB0

Match the complete model, revision and required installed function before ordering.

Specialist model
Nordwel customer support

Company Services & FAQ

Practical support for ZINT-592 3AXD50000037931 selection, quotation and replacement planning.

Company services

Component and installation checkReview the complete model, actual interfaces and installed configuration before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

ZINT-592 3AXD50000037931 FAQ

What does ZINT-592 3AXD50000037931 do?It is the MC main interface board used within the supported drive module. The supply scope is the rated interface-board spare, not a complete drive or a complete control unit.
Can this rated ZINT-592 board be fitted to CCU-12?No. This service version is compatible only with CCU-24. Where the fitted control unit is CCU-12, the stated replacement route requires changing the control unit to CCU-24 rather than fitting the board directly.
Which drive platforms use ZINT-592 3AXD50000037931?The listed applications are ACS580, ACH580 and ACQ580 modules. Platform identity is one selection condition; the installed frame, control unit and required rating must also match.
Is the same service board specified for every drive frame?The stated application for this item is module frames R8-R9. Do not extend that scope to another frame merely because its PCB has a similar appearance or board designation.
What software condition applies after manufacturing week 25/2017?For equipment manufactured after week 25/2017, CCU-24 software must be version 2.03.0.4 or later. Retain the manufacturing-date qualification when checking the installed unit.
Does ZINT-592 3AXD50000037931 arrive without a loaded rating?No. This is the preloaded rated service version, supplied with the correct PUtype and RatingID for the selected drive configuration. The required configuration should therefore be agreed during order review.
Can RatingID be changed after this board is supplied?RatingID cannot be changed afterwards. A mismatch must be resolved in the selection stage; do not plan a replacement on the assumption that the supplied rating can be edited later.
What is the net weight of ZINT-592 3AXD50000037931?The product net weight is 0.4 kg. The listed gross and package level 1 weight is 0.411 kg; the gross value should not be presented as the bare product mass.
Is a matching ZINT-592 marking enough to approve a replacement?No. The board marking identifies the PCB type, while replacement selection also depends on the complete service ordering code and the installed configuration. Check the loaded rating, controller, frame and applicable software condition together.
What information should accompany a quotation request for this rated board?Provide the complete ordering identity, required quantity, installed drive identification and the required PUtype and RatingID. Also include the fitted controller and module frame so the supplied service item can be checked against the installation before ordering.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
ABB 580-series drives support

Applications & Why Choose Nordwel

Engineering uses of ZINT-592 3AXD50000037931 within the correctly matched field installation.

Application areas

01ACS580 module serviceMain interface-board replacement in supported R8-R9 modules using CCU-24, with the correct preloaded drive rating.
02ACH580 drive supportMaintain the specified host platform by matching the fitted control unit, module frame and date-dependent software requirement.
03ACQ580 replacement planningSelect the rated board for the installed module using its actual PUtype and RatingID rather than appearance alone.
04CCU-24 rated spare selectionPrepare a correctly configured interface-board spare before a maintenance window; the loaded RatingID is not subsequently adjustable.

Why choose Nordwel

Configuration-aware supportReview the component identity, fitted interfaces and application requirements before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final selection depends on the complete model, installed hardware revision, field interfaces and validated application.
Need help matching ZINT-592 3AXD50000037931 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp