other
Products
Bently Nevada 3500/77M 143737-01 external-termination cylinder-pressure I/O module product view
Bently Nevada 3500/77M 143737-01 external-termination cylinder-pressure I/O module product view
Bently Nevada 3500/77M 143737-01 external-termination cylinder-pressure I/O module product view

Bently Nevada 3500/77M 143737-01 external-termination cylinder-pressure I/O module

EMAIL SALES
Bently Nevada 3500/77M cylinder pressure
3500/77M 143737-01 - external-termination cylinder-pressure I/O module

3500/77M 143737-01 routes cylinder-pressure signals through external terminations. Match the approved sensors, field blocks and cables.

Bently Nevada3500/77M cylinder pressureExternal-termination pressure I/O
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
3500/77M 143737-01 product profile
ManufacturerBently Nevada
Exact model3500/77M 143737-01
TerminationExternal
Sensor classApproved positive-voltage pressure
Input impedance50 kΩ
Rear rack spaceOne full-height rear slot
I/O weight0.20 kg
Verified functionCylinder-pressure signal interface
  • Brand:

    Bently Nevada
  • Item NO.:

    3500/77M 143737-01
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

3500/77M 143737-01 configuration inquiry

Get a precise quote for 3500/77M 143737-01

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

3500/77M 143737-01 function and interfaces

3500/77M 143737-01 is the rear cylinder-pressure I/O module for an external-termination installation. It interfaces Bently-approved positive-voltage pressure transducers; the front monitor performs measurement processing and alarms. External termination blocks and connecting cables are separate selection items.

Field-signal interfaceConnect approved positive-voltage cylinder-pressure transducers to the monitoring position.
Remote terminationRoute field wiring through the selected external termination blocks and matching I/O cables.
Rear-slot installationUse one full-height rear rack slot associated with the correct front monitor.
Measurement chainRetain sensor calibration, channel assignments and front-monitor alarm configuration as one matched chain.

Installation and selection boundaries

  • External termination blocks and cables are ordered separately; the I/O module alone is not a complete cylinder-pressure monitoring system.
  • The installed pressure interface uses approved positive-voltage transducers and a 50 kOhm input impedance.
  • Verify the pressure transducer calibration and installed wiring before returning the monitored machine to service.
Official product data

3500/77M 143737-01 key specifications

Component role Cylinder-pressure I/O module
Field termination External
Sensor arrangement Bently-approved positive-voltage pressure transducers
Input impedance 50 kOhm
Rack position One full-height rear slot
I/O dimensions (H x W x D) 241.3 x 24.4 x 99.1 mm
I/O weight 0.20 kg
Operating temperature -30 to +65 degrees C
Humidity 95%, non-condensing

Bently Nevada datasheet 147485 Rev. Y, pages 3-4 and 7-8.

Pre-order check 01

Installation environment

Match the rear-slot hardware and the complete external field-termination arrangement before connection.

  • Reserve one full-height rear rack slot paired with the correct cylinder-pressure front monitor.
  • Select the external termination blocks and connecting cables separately; preserve the field cable identification.
  • Keep the installed module within -30 to +65 degrees C and prevent condensation.
  • Coordinate machine protection and isolate the affected field circuits before disturbing the monitoring wiring.
Keep the installed wiring and configuration records available for controlled commissioning checks.
Pre-order check 02

Compatibility confirmation

Review the complete identity together with the fitted interfaces and installed configuration.

Complete component
3500/77M 143737-01; match the actual hardware label and revision.
Front-monitor relationship
Use the matching cylinder-pressure monitoring position; the rear module is not the front processor.
Transducer interface
Bently-approved positive-voltage third-party cylinder-pressure transducers.
Termination arrangement
External field blocks plus the appropriate I/O cable; retain the installed pin and channel allocation.
Configuration
Preserve transducer calibration, channel mapping and the front-monitor pressure/alarm configuration.
Confirm the pressure-signal path from each field transducer through its external terminations to the corresponding monitor channel.
Recommended model families

More Bently Nevada models

Bently Nevada selection 01Bently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 02Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 03Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 04Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Additional published brands

Additional Advantage Models

General ElectricGeneral Electric DS200SVIAG1AGeneral Electric DS200SPCBG1AGeneral Electric DS200SLCCG2A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200SHVIG1AGeneral Electric DS200PTCTG1AGeneral Electric DS200PLIBG1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200PANAH1AGeneral Electric DS200FHVAG1AGeneral Electric DS200FCGDH1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200EXPSG1ABBGeneral Electric IC200BEM104General Electric IC200CHS003

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02Siemens 6GK1143-0AA01

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5951-7LB21Siemens 6ES5948-3UA23Siemens 6ES5948-3UA13

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5945-7UA23Siemens 6ES5941-7UA12Siemens 6ES5921-3WB12

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5541-8AA11Siemens 6ES7143-5BF00-0BA0Siemens 6ES7144-5KD00-0BA0

Confirm the complete order code and installed-system requirements before selecting a replacement.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

3500/77M 143737-01 Order Guide

Selection checks for the complete 3500/77M 143737-01 identity and installed arrangement.
1Confirm the rear I/O identitySpecify the complete 3500/77M 143737-01 identity and required hardware revision.
2Identify the field transducersRecord the approved pressure-sensor interface and its supplied calibration points.
3Match external terminationsIdentify the terminal blocks and I/O cables; these are separate order items.
4Check the rack positionConfirm one full-height rear slot and the associated front-monitor configuration.
5Review operating conditionsCheck cabinet temperature, non-condensing humidity, cable routing and machine-protection arrangements.
6Send a complete inquiryProvide model, revision, quantity, existing termination arrangement and delivery destination.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Check the complete ordering code and the installed interface requirements before selection.
General ElectricIC200UAA007

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL004

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL005

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL006

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAR028

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UDD112

Match the complete model, revision and required installed function before ordering.

Specialist model
Nordwel customer support

Company Services & FAQ

Practical support for 3500/77M 143737-01 selection, quotation and order coordination.

Company services

Component and installation checkReview the complete ordering identity, actual interfaces and installed configuration before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

3500/77M 143737-01 FAQ

Is 3500/77M 143737-01 the front cylinder-pressure monitor?No. It is the rear I/O module with external terminations. Measurement processing and alarm functions reside in the matching front monitor, so the two components have different roles.
What else is needed to wire 3500/77M 143737-01 to the field?Select the external termination blocks and their connecting I/O cables separately. Match the installed terminal style, cable routing and channel allocation before ordering; the module is not supplied as a complete field-wiring system by its part number alone.
Which pressure-transducer interface suits 3500/77M 143737-01?The specified interface is for Bently-approved positive-voltage third-party cylinder-pressure transducers. Match the sensor calibration and electrical interface to the actual monitoring configuration rather than selecting a pressure sensor by connector appearance.
What input impedance applies to 3500/77M 143737-01?50 kOhm applies to the internal/external-termination cylinder-pressure I/O interface. Keep this input characteristic distinct from the output impedance of the front monitor buffered signal.
Where does 3500/77M 143737-01 fit in the rack?The I/O module occupies one full-height rear slot. Verify its association with the correct cylinder-pressure front-monitor position and retain the channel identification through the external termination wiring.
How much space does 3500/77M 143737-01 require?Its I/O-module dimensions are 241.3 x 24.4 x 99.1 mm, stated as height x width x depth, and its weight is 0.20 kg. These are rear I/O values, not the larger front-monitor dimensions.
Can external terminal blocks be connected as though 3500/77M 143737-01 were an internal-termination unit?No. Preserve the external-termination arrangement and its matched connecting cable. Internal and external termination installations use different field-wiring paths; the existing wiring arrangement must be checked before changing hardware.
What cabinet conditions are specified for 3500/77M 143737-01?The operating range with this cylinder-pressure I/O arrangement is -30 to +65 degrees C, with 95% non-condensing humidity. Prevent condensation and verify any site approval restrictions separately from the general operating specification.
Does fitting 3500/77M 143737-01 establish the pressure scale automatically?Sensor calibration and the corresponding monitor configuration must still be matched. Preserve the transducer pressure/voltage calibration points, engineering units and channel assignment when replacing the I/O hardware.
What should be checked before restarting after a 3500/77M 143737-01 replacement?Check the full label, external termination/cable path, field polarity and channel allocation. Then verify the pressure readings and relevant front-monitor alarm settings under the approved machine restart procedure.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada 3500/77M cylinder pressure support

Applications & Why Choose Nordwel

Engineering uses of 3500/77M 143737-01 within the matched monitoring installation.

Application areas

01Compressor cylinder-pressure acquisitionInterface approved pressure transducers in a reciprocating-compressor monitoring installation.
02External field-wiring cabinetsKeep transducer wiring on dedicated external termination blocks connected to the rear I/O position.
03Configured pressure measurementsSupport the matched signal chain used by the front monitor for cylinder-pressure variables and alarms.
04Controlled I/O maintenanceReplace rear interface hardware while preserving the existing sensor calibration and channel allocation.

Why choose Nordwel

Configuration-aware supportReview the component identity, fitted interfaces and installed monitoring arrangement before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final selection depends on the complete ordering identity, hardware revision, connected interfaces and installed configuration.
Need help matching 3500/77M 143737-01 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp