other
Products
General Electric IC600CB504 Table and scratchpad memory circuit board product view
General Electric IC600CB504 Table and scratchpad memory circuit board product view
General Electric IC600CB504 Table and scratchpad memory circuit board product view

General Electric IC600CB504 table and scratchpad memory circuit board

EMAIL SALES
Series Six
IC600CB504 — Table and scratchpad memory circuit board

IC600CB504 is the circuit-board ordering scope for table and scratchpad memory in the covered CPU arrangement. Its internal memory organization must not be confused with an equivalent amount of user-program storage.

General ElectricSeries SixCircuit boardModel 600/6000 CPU memory arrangement
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC600CB504 product profile
ManufacturerGeneral Electric
Exact modelIC600CB504
Product typeTable and scratchpad memory circuit board
Product familySeries Six
Primary roleRetains CPU table and scratchpad data
Interface contextModel 600/6000 CPU memory arrangement
  • Brand:

    General Electric
  • Item NO.:

    IC600CB504
IC600CB504 configuration inquiry

Get a precise quote for IC600CB504

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

Table and scratchpad memory circuit board configuration

IC600CB504 is the circuit-board ordering scope for table and scratchpad memory in the covered CPU arrangement. Its internal memory organization must not be confused with an equivalent amount of user-program storage.

System roleIC600CB504 is the circuit-board ordering scope for table and scratchpad memory in the covered CPU arrangement. Its internal memory organization must not be confused with an equivalent amount of user-program storage.
Electrical integrationPreserve CPU power and battery-maintenance precautions to protect retained memory contents.
Configuration reviewMatch the DIP selection and actual CPU memory arrangement to the retained system configuration.
CommissioningCheck memory indications and restore the validated CPU data and application state under controlled conditions.

Engineering selection points

  • Supplied-item scope: Circuit board.
  • CPU application: Model 600/6000.
  • Memory technology: CMOS with lithium-battery backup.
  • Internal memory organization: 8K words.
Official product data

IC600CB504 key specifications

Supplied-item scopeCircuit board
CPU applicationModel 600/6000
Memory technologyCMOS with lithium-battery backup
Internal memory organization8K words
CPU supply5 VDC; 650 mA maximum
ConfigurationDIP selection of system logic-memory space
Status indicatorsBATTERY and PARITY

Technical reference: GEK-83501B Table and Scratchpad Memory instruction sheet.

Pre-order check 01

Installation environment

Check the mounting, connection and operating conditions for this exact configuration before installation.

  • Back up the required CPU data before disturbing the memory board.
  • Isolate the CPU according to the memory and battery-handling procedure.
  • Record DIP selections, fitted revision and the actual board supply scope.
  • Inspect battery/parity status and validate restored CPU operation before release.
Record the installed arrangement and the final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete item to its field interface, mechanical arrangement and configured system.

Complete item
Retain IC600CB504 and record the supplied board revision.
Installed assembly
Model 600/6000 CPU memory arrangement.
Electrical conditions
Preserve CPU power and battery-maintenance precautions to protect retained memory contents.
Configuration
Match the DIP selection and actual CPU memory arrangement to the retained system configuration.
Acceptance
Check memory indications and restore the validated CPU data and application state under controlled conditions.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Recommended model families

More General Electric models

General Electric selections 01General Electric DS200DMCBG2AGeneral Electric DS200ACNAG1AGeneral Electric DS200AAHAH1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 02General Electric DS200SVIAG1AGeneral Electric DS200SPCBG1AGeneral Electric DS200SLCCG2A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 03General Electric DS200SHVIG1AGeneral Electric DS200PTCTG1AGeneral Electric DS200PLIBG1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 04General Electric DS200PANAH1AGeneral Electric DS200FHVAG1AGeneral Electric DS200FCGDH1A

Match the complete ordering code and installed-system requirements before selection.

Additional published brands

Additional Advantage Models

Additional selections 01Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00Bently Nevada 330130-075-01-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 02Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05Bently Nevada 330103-02-04-10-02-CN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 03Bently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CNBently Nevada 330903-00-07-10-01-CN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 04Bently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 05Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 06Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05 MOD 145004-75

Match the complete ordering code and installed-system requirements before selection.

Additional selections 07Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02Bently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02

Match the complete ordering code and installed-system requirements before selection.

Additional selections 08Bently Nevada 129716-XXX-040-15 MOD 166797-0133Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02vibro-meter VM600 RPS6U SIM-275D-24 200-582-200-013

Match the complete ordering code and installed-system requirements before selection.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC600CB504 Order Guide

Match the complete configuration to the installed requirement before finalizing the order.
1Confirm the exact itemIC600CB504 — Table and scratchpad memory circuit board.
2Check the field interfaceModel 600/6000 CPU memory arrangement.
3Review the installationBack up the required CPU data before disturbing the memory board.
4Match the configured systemRetain IC600CB504 and record the supplied board revision.
5Agree the supplied scopeConfirm the requested quantity, condition, package contents and destination with the quotation.
6Plan a controlled acceptanceMatch the complete supplied identity, board revision and installed circuit requirements before operational release.

Middle East Demand & Specialist Models

Selected published product references for regional projects and installed-system maintenance.

Published references for regional project selection.
Confirm the exact part number before ordering.
Siemens6GK1143-0AA01

CP143 TF communication processor. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5951-7LB21

PS951 power supply. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5948-3UA23

CPU948 central processing unit. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5948-3UA13

CPU948 central processing unit. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5945-7UA23

CPU945 central processing unit. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5941-7UA12

CPU941 central processing unit. Match the complete configuration and supplied scope.

Specialist brand
Nordwel customer support

Company Services & FAQ

Configuration and order support for General Electric IC600CB504.

Company services

Model & configuration checkReview the complete item and model 600/6000 cpu memory arrangement requirements before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC600CB504 FAQ

What is the ordering scope of IC600CB504?The catalogue scope is a circuit board. Confirm any required front panel or associated assembly separately rather than assuming that every packaged component is included.
Which CPU arrangement uses this table and scratchpad board?The covered application is the Model 600/6000 CPU arrangement. Match the actual CPU and memory configuration before replacing the board.
Does 8K words mean 8K words of user program?No. The figure describes the internal memory organization of this table and scratchpad board. It should not be advertised as an equivalent user-program capacity.
How are retained memory contents supported?The board uses CMOS memory with lithium-battery backup. Preserve the required backup and battery-handling procedure during maintenance.
What supply load is listed for the memory circuit board?The covered CPU requirement is 5 VDC at 650 mA maximum. Include the actual board configuration in the CPU power assessment.
Why should the DIP selections be recorded?They select the system logic-memory space arrangement. Restoring the wrong selection can change how the CPU memory is configured even when the board fits physically.
What do BATTERY and PARITY provide during inspection?They are separate memory-status indications. Interpret them with the retained CPU data and maintenance procedure rather than assuming one indication proves all memory contents are correct.
Should a memory board be removed before the application is backed up?Preserve the required program and CPU data first. A hardware intervention can put retained information at risk, so the recovery record should exist before removal.
Can a full module assembly be assumed interchangeable with a bare board?Compare the exact supplied scope and applicable CPU assembly. Mechanical packaging, front hardware and the circuit board are separate procurement details.
What should be validated after the memory arrangement is restored?Check the configured memory selection, retained data and the intended CPU application state. Record the final memory indications and controlled operational checks before returning the system to service.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series Six

Applications & Why Choose Nordwel

Engineering contexts for IC600CB504 and the available order-coordination support.

Application areas

01CPU data-memory maintenanceRestore the covered table and scratchpad memory arrangement.
02Battery-backed retention reviewsProtect retained information during planned board work.
03Memory-space configurationPreserve the DIP selection used by the installed CPU.
04Circuit-board procurementDistinguish the board from any required panel or complete assembly.

Why choose Nordwel

Configuration-aware supportReview the exact item, model 600/6000 cpu memory arrangement and installed-system requirements before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Need help matching IC600CB504?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp