other
Products
330500-07-00 product image
330500-07-00 product image
330500-07-00 product image

Bently Nevada 330500-07-00 Velomitor piezo-velocity sensor

EMAIL SALES
Exact-model product profile
330500-07-00 — Velomitor piezo-velocity sensor

A rugged velocity transducer for machinery condition monitoring with an integral cable and stainless-steel housing. This page keeps the complete catalog identity visible for engineering and procurement review.

Bently Nevada330500 Velomitor familyExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
330500-07-00 product profile
ManufacturerBently Nevada
Exact model330500-07-00
Product typeVelomitor piezo-velocity sensor
Product family330500 Velomitor family
Primary roleMeasures machine casing vibration velocity.
Interface context3/8-16 UNC mounting and two-pin hermetic connector.
  • Brand:

    Bently Nevada
  • Item NO.:

    330500-07-00
  • Part Number:

    330500-07-00
  • Description:

    Velomitor piezo-velocity sensor
330500-07-00 configuration inquiry

Get a precise quote for 330500-07-00

Email Sales
Sales managerTiffany Guan

330500-07-00 product identification

A rugged velocity transducer for machinery condition monitoring with an integral cable and stainless-steel housing.

Installed roleMeasures machine casing vibration velocity.
Interface context3/8-16 UNC mounting and two-pin hermetic connector.
Exact-code controlUse 330500-07-00 without suffix substitution.
Technical referenceBaker Hughes Bently Nevada datasheet 141632

Engineering and installation checks

  • Confirm 330500-07-00 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

330500-07-00 key specifications

Exact model330500-07-00
ManufacturerBently Nevada
Product typeVelomitor piezo-velocity sensor
System family330500 Velomitor family
Sensitivity3.94 mV/mm/s (100 mV/in/s), ±5%
Frequency response4.5 Hz to 5 kHz, ±3 dB
Mounting thread3/8-16 UNC
Housing material316L stainless steel
Approximate mass142 g

Technical reference: Baker Hughes Bently Nevada datasheet 141632

Pre-order check 01

Installation environment

Verify the mechanical and measurement-system details before installing the sensor or probe.

  • Record the complete installed identity 330500-07-00 before removal.
  • Confirm the documented mounting, connector and cable or system-length details.
  • Protect the sensing surface and connectors from impact or contamination.
  • Check the installed system response against the approved maintenance procedure before return to service.
Mechanical fit and measurement-system compatibility must be confirmed before commissioning.
Pre-order check 02

Compatibility confirmation

Compare the complete identity and installed-system details before approving a substitute.

Complete identity
330500-07-00
Product role
Velomitor piezo-velocity sensor
Mounting or body
330500 Velomitor family
Connector or cable
Sensitivity: 3.94 mV/mm/s (100 mV/in/s), ±5%
Measurement system
Frequency response: 4.5 Hz to 5 kHz, ±3 dB
Compatibility is confirmed only when the order code, function, interfaces and installed context have been reviewed together.

330500-07-00 Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order codeRead the complete order code: 330500-07-00.
2Capture the full nameplateCapture the full nameplate and revision markings.
3Record the installed contextRecord the installed system, slot, mounting and cable context.
4Verify interfaces and settingsVerify 3/8-16 UNC mounting and two-pin hermetic connector..
5Plan commissioning checksPlan isolation, installation and controlled commissioning checks.
6Request an exact-code quotationRequest a written exact-code quotation from Tiffany Guan.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for 330500-07-00.

Company services

Exact-model checkReview 330500-07-00, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

330500-07-00 FAQ

For the Velomitor piezo-velocity sensor product type record, what does the complete model 330500-07-00 identify?

330500-07-00 identifies a Velomitor piezo-velocity sensor in the 330500 Velomitor family. Use the complete order code for quotation and replacement review.

What sensitivity applies to 330500-07-00?

For 330500-07-00, the documented sensitivity is 3.94 mV/mm/s (100 mV/in/s), ±5%. Confirm that requirement against the installed equipment record before ordering.

Which frequency response should be checked for 330500-07-00?

For 330500-07-00, the documented frequency response is 4.5 Hz to 5 kHz, ±3 dB. Confirm that requirement against the installed equipment record before ordering.

What is the documented mounting thread for 330500-07-00?

For 330500-07-00, the documented mounting thread is 3/8-16 UNC. Confirm that requirement against the installed equipment record before ordering.

Which housing material distinguishes 330500-07-00?

For 330500-07-00, the documented housing material is 316L stainless steel. Confirm that requirement against the installed equipment record before ordering.

What approximate mass must be confirmed for 330500-07-00?

For 330500-07-00, the documented approximate mass is 142 g. Confirm that requirement against the installed equipment record before ordering.

For the Velomitor piezo-velocity sensor product type record, which compatibility points must be reviewed before 330500-07-00 is approved as a replacement?

Match the complete code, sensor or probe family, mounting, connector or cable arrangement, and the intended measurement system.

For the Velomitor piezo-velocity sensor product type record, how should 330500-07-00 be prepared for installation or controlled use?

Record the installed identity, mounting and connection details; protect the sensing surface and connectors; then follow the approved measurement-system commissioning procedure.

For the Velomitor piezo-velocity sensor product type record, what should be inspected when 330500-07-00 is received?

Check the complete code, housing and sensing-surface condition, connectors, cable condition, quantity and supplied accessories before acceptance.

For the Velomitor piezo-velocity sensor product type record, what information helps Tiffany Guan review an inquiry for 330500-07-00?

Provide the complete 330500-07-00 label, installed equipment family, interface or connection details, required quantity, destination and any revision or approval requirement.

Sales managerTiffany Guan
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for 330500-07-00.

Application areas

01Machinery condition monitoring330500-07-00 is reviewed as part of the documented transducer or monitoring signal chain.
02Turbine supervisory instrumentationUse the exact component only in the matching sensor family and configured channel.
03Planned maintenance replacementCompare the full order code, cable path, mounting and installed system records before exchange.
04Commissioning verificationCheck mechanical installation, connections and the applicable channel response before return to service.

Why choose Nordwel

Exact-model handlingComplete catalog identity retained from inquiry to quotation.
Technical reviewInterfaces and installed context checked before substitution.
Clear communicationDirect coordination with Tiffany Guan for commercial and technical details.
Worldwide supportPacking, freight and tracking arranged for the destination.
For an exact-model review, send the installed label and interface details to Tiffany Guan.
Tiffany Guan · +86 18030235313Email Sales
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp