other
Products
General Electric IC600CB525 Advanced logic-control circuit board product view
General Electric IC600CB525 Advanced logic-control circuit board product view
General Electric IC600CB525 Advanced logic-control circuit board product view

General Electric IC600CB525 advanced logic-control circuit board

EMAIL SALES
Series Six
IC600CB525 — Advanced logic-control circuit board

IC600CB525 is the Advanced logic-control circuit board in the covered Series Six CPU arrangement. Its installation includes the adjacent arithmetic-control connection and required short ribbon cable; it must be matched to the retained CPU assembly.

General ElectricSeries SixBasic and Advanced instructionsCPU slot 2 beside arithmetic control
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC600CB525 product profile
ManufacturerGeneral Electric
Exact modelIC600CB525
Product typeAdvanced logic-control circuit board
Product familySeries Six
Primary roleSequences the CPU microprogram
Interface contextCPU slot 2 beside arithmetic control
  • Brand:

    General Electric
  • Item NO.:

    IC600CB525
IC600CB525 configuration inquiry

Get a precise quote for IC600CB525

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

Advanced logic-control circuit board configuration

IC600CB525 is the Advanced logic-control circuit board in the covered Series Six CPU arrangement. Its installation includes the adjacent arithmetic-control connection and required short ribbon cable; it must be matched to the retained CPU assembly.

System roleIC600CB525 is the Advanced logic-control circuit board in the covered Series Six CPU arrangement. Its installation includes the adjacent arithmetic-control connection and required short ribbon cable; it must be matched to the retained CPU assembly.
Electrical integrationUse the applicable CPU assembly and its approved power/isolation procedure.
Configuration reviewMatch the Advanced-function CPU hardware arrangement and the required ribbon interconnection.
CommissioningValidate CPU startup and the retained application under the controlled system test procedure.

Engineering selection points

  • Function level: Basic and Advanced instructions.
  • Control elements: System clock and microprogram sequencer.
  • Program component: PROM.
  • CPU location: Slot 2, adjacent to arithmetic control.
Official product data

IC600CB525 key specifications

Function levelBasic and Advanced instructions
Control elementsSystem clock and microprogram sequencer
Program componentPROM
CPU locationSlot 2, adjacent to arithmetic control
Required interconnectionShort ribbon cable
User status LEDsNone on this board

Technical reference: GEK-96602A CPU logic-control board description and ordering context.

Pre-order check 01

Installation environment

Check the mounting, connection and operating conditions for this exact configuration before installation.

  • Preserve the CPU project and record the existing board/ribbon arrangement.
  • Isolate the CPU and apply circuit-board ESD precautions.
  • Fit the board in the required location and restore the short ribbon connection correctly.
  • Check CPU behavior and the required application sequence before returning the controller to service.
Record the installed arrangement and the final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete item to its field interface, mechanical arrangement and configured system.

Complete item
Retain IC600CB525 and record the supplied board revision.
Installed assembly
CPU slot 2 beside arithmetic control.
Electrical conditions
Use the applicable CPU assembly and its approved power/isolation procedure.
Configuration
Match the Advanced-function CPU hardware arrangement and the required ribbon interconnection.
Acceptance
Validate CPU startup and the retained application under the controlled system test procedure.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Recommended model families

More General Electric models

General Electric selections 01General Electric DS200SPCBG1AGeneral Electric DS200SLCCG2AGeneral Electric DS200SHVIG1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 02General Electric DS200PTCTG1AGeneral Electric DS200PLIBG1AGeneral Electric DS200PANAH1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 03General Electric DS200FHVAG1AGeneral Electric DS200FCGDH1AGeneral Electric DS200EXPSG1ABB

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 04General Electric DS200EXDEG1AGeneral Electric DS200DMCBG2AKGGeneral Electric DS200DMCBG2A

Match the complete ordering code and installed-system requirements before selection.

Additional published brands

Additional Advantage Models

Additional selections 01Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 02Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05 MOD 145004-75

Match the complete ordering code and installed-system requirements before selection.

Additional selections 03Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02Bently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02

Match the complete ordering code and installed-system requirements before selection.

Additional selections 04Bently Nevada 129716-XXX-040-15 MOD 166797-0133Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02vibro-meter VM600 RPS6U SIM-275D-24 200-582-200-013

Match the complete ordering code and installed-system requirements before selection.

Additional selections 05PLC 1394C-SJT10-DPLC 1336-PB-SP5APLC 700-HC14Z24

Match the complete ordering code and installed-system requirements before selection.

Additional selections 06PLC 41391-261-52PLC 20F11NC104JA0NNNNNPLC 20F11RC015JA0NNNNN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 07PLC 2098-DSD-020XPLC 2711P-T4W22D8SPLC 2711P-T9W21D8S

Match the complete ordering code and installed-system requirements before selection.

Additional selections 08PLC 1769-IQ16KSiemens 6ES7151-3AA22-0AB0Siemens 6ES7151-3BA22-0AB0

Match the complete ordering code and installed-system requirements before selection.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC600CB525 Order Guide

Match the complete configuration to the installed requirement before finalizing the order.
1Confirm the exact itemIC600CB525 — Advanced logic-control circuit board.
2Check the field interfaceCPU slot 2 beside arithmetic control.
3Review the installationPreserve the CPU project and record the existing board/ribbon arrangement.
4Match the configured systemRetain IC600CB525 and record the supplied board revision.
5Agree the supplied scopeConfirm the requested quantity, condition, package contents and destination with the quotation.
6Plan a controlled acceptanceMatch the complete supplied identity, board revision and installed circuit requirements before operational release.

Middle East Demand & Specialist Models

Selected published product references for regional projects and installed-system maintenance.

Published references for regional project selection.
Confirm the exact part number before ordering.
Siemens6ES5470-4UC13

470-4 eight-channel analog output module. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5465-4UA13

465-4 sixteen-channel analog input module. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5464-8MF21

464 two-channel Pt100 input module. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5464-8ME11

464-8 four-channel analog current input module. Match the complete configuration and supplied scope.

Specialist brand
Bently Nevada330854-080-25-05

armored 3300 XL 25 mm extension cable. Match the complete configuration and supplied scope.

Specialist brand
Bently Nevada330854-080-24-05

3300 XL 25 mm extension cable. Match the complete configuration and supplied scope.

Specialist brand
Nordwel customer support

Company Services & FAQ

Configuration and order support for General Electric IC600CB525.

Company services

Model & configuration checkReview the complete item and cpu slot 2 beside arithmetic control requirements before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC600CB525 FAQ

What is the purpose of IC600CB525?It provides the Advanced logic-control function, including system clock and microprogram sequencing, in the covered CPU arrangement. It is not a field I/O module.
Which instruction levels belong to this board’s documented function?The covered function supports Basic and Advanced instructions. Match the installed CPU feature arrangement rather than assuming support for other instruction levels.
Where is the logic-control board fitted?The documented location is CPU slot 2 beside the arithmetic-control board. Preserve that hardware relationship during replacement.
Why is the short ribbon cable part of the installation check?It forms the required interconnection with the adjacent CPU hardware. A board fitted without the correct restored ribbon connection is not a complete installation.
Does this board provide a front-panel user status LED?The covered board has no user status LEDs. Assess CPU behavior through the appropriate system indications and functional checks instead of expecting a local board indicator.
Can a logic-control board be selected by program-capacity claims alone?Match the actual CPU feature level and hardware configuration. A program-capacity figure from a different CPU arrangement does not establish equivalence.
What should be retained before the CPU hardware is disturbed?Keep the validated controller project and record the board positions, revisions and ribbon orientation. These records support a controlled restoration of the CPU assembly.
Why are ESD precautions important during board handling?The exposed circuit board can be damaged by electrostatic discharge. Use the approved static-safe handling procedure and protect the components and connectors.
What should be checked if the CPU fails to start after replacement?Review board identity, location, seating and ribbon connection against the retained hardware record. Check the CPU supply and diagnostics before changing the application program.
Which tests establish that the logic-control replacement is ready for service?Verify correct CPU startup and the required operation of the retained application with the process secured. Record the final hardware configuration and acceptance results.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series Six

Applications & Why Choose Nordwel

Engineering contexts for IC600CB525 and the available order-coordination support.

Application areas

01Advanced CPU restorationMaintain the installed logic-control feature arrangement.
02Microprogram sequencing hardwareMatch clock and sequencing functions within the CPU assembly.
03Adjacent-board interconnectionPreserve the required short ribbon connection.
04Legacy controller acceptanceValidate startup and application operation after board maintenance.

Why choose Nordwel

Configuration-aware supportReview the exact item, cpu slot 2 beside arithmetic control and installed-system requirements before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Need help matching IC600CB525?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp