other
Products
Bently Nevada 3500/70M 135489-01 four-input internal-barrier I/O module for reciprocating monitoring product view
Bently Nevada 3500/70M 135489-01 four-input internal-barrier I/O module for reciprocating monitoring product view
Bently Nevada 3500/70M 135489-01 four-input internal-barrier I/O module for reciprocating monitoring product view

Bently Nevada 3500/70M 135489-01 four-input internal-barrier I/O module for reciprocating monitoring

EMAIL SALES
Bently Nevada 3500/70M
3500/70M 135489-01 - four-input internal-barrier I/O module for reciprocating monitoring

3500/70M 135489-01 connects four sensor loops through internal barriers. Match its wiring to the configured reciprocating-compressor measurements.

Bently Nevada3500/70MReciprocating barrier I/O
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
3500/70M 135489-01 product profile
ManufacturerBently Nevada
Exact model3500/70M 135489-01
Barrier arrangementInternal barriers
TerminationInternal
Spare input designation4 × Prox/Accel
Installation contextReciprocating compressor vibration
Channel setupProgrammed in pairs
Verified functionBarrier-equipped field I/O
  • Brand:

    Bently Nevada
  • Item NO.:

    3500/70M 135489-01
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

3500/70M 135489-01 configuration inquiry

Get a precise quote for 3500/70M 135489-01

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

3500/70M 135489-01 function and interfaces

3500/70M 135489-01 is a four-input internal-barrier I/O module for reciprocating monitoring for the 3500/70M installation. The associated barrier illustration identifies the arrangement for connecting four accelerometer sensors.

Compressor vibration field interfaceConnect the sensor circuits used by the reciprocating monitoring installation.
Four-sensor barrier arrangementProvide the internal-barrier assembly identified for four accelerometer sensors in the hardware figure.
Internal termination maintenancePreserve the rack-side terminal mapping and approved sensor-loop wiring.
Paired reciprocating measurementsSupport the field path for the selected impulse, acceleration or velocity function.

Installation and selection boundaries

  • The spare is listed as an internal-barrier I/O module with internal terminations and a 4 × Prox/Accel input designation.
  • The associated barrier illustration identifies the arrangement for connecting four accelerometer sensors.
  • The front monitor performs the configured reciprocating-compressor measurements; the rear spare is not a standalone processor.
Official product data

3500/70M 135489-01 key specifications

Spare assembly I/O module with internal barriers
Terminations Internal
Input designation in spare list 4 × Prox/Accel
Associated monitor channels Four
Channel configuration Programmed in pairs
Installed functions Impulse Acceleration, Acceleration 2, Recip Velocity or Low Frequency Recip Velocity

Bently Nevada datasheet 166766 Rev. T, pages 1, 10 and 14.

Pre-order check 01

Installation environment

Preserve the approved protection arrangement while installing the correct component and field connections.

  • Record the compressor measurement location, sensor identity and internal channel wiring.
  • Coordinate machinery protection coverage before disconnecting any active vibration loop.
  • Preserve the internal-barrier ground and sensor-loop installation when restoring the terminals.
  • Validate the configured paired function, sensor scale factor and alarm behavior after replacement.
Keep the installed wiring and configuration records available for controlled commissioning checks.
Pre-order check 02

Compatibility confirmation

Review the complete identity together with the fitted interfaces and installed configuration.

Complete combination
3500/70M 135489-01 for the stated reciprocating monitoring context.
Internal wiring
Retain the four field-loop terminal assignments and the barrier installation.
Sensor arrangement
Check the actual accelerometers and the approved four-input loop arrangement.
Monitor project
Restore the paired impulse, acceleration or reciprocating-velocity function and alarm settings.
Machine availability
Coordinate compressor protection, controlled testing and return-to-service requirements.
Match 3500/70M 135489-01 with the installed monitor, field wiring, configuration and applicable installation requirements.
Recommended model families

More Bently Nevada models

Bently Nevada selection 01Bently Nevada 330905-00-25-05-02-CNBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 02Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05Bently Nevada 330902-00-95-05-02-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 03Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00Bently Nevada 330879-03-00

Confirm the complete order code and installed-system requirements before selecting a replacement.

Bently Nevada selection 04Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05Bently Nevada 330851-02-000-080-90-01-05

Confirm the complete order code and installed-system requirements before selecting a replacement.

Additional published brands

Additional Advantage Models

General ElectricGeneral Electric IC200UDD120General Electric DS200AAHAH1AGeneral Electric DS200SVIAG1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200SPCBG1AGeneral Electric DS200SLCCG2AGeneral Electric DS200SHVIG1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200PTCTG1AGeneral Electric DS200PLIBG1AGeneral Electric DS200PANAH1A

Confirm the complete order code and installed-system requirements before selecting a replacement.

General ElectricGeneral Electric DS200FHVAG1AGeneral Electric DS200FCGDH1AGeneral Electric DS200EXPSG1ABB

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES7143-5AH00-0BA0Siemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6GK1143-0TA02Siemens 6GK1143-0AA01Siemens 6ES5951-7LB21

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5948-3UA23Siemens 6ES5948-3UA13Siemens 6ES5945-7UA23

Confirm the complete order code and installed-system requirements before selecting a replacement.

SiemensSiemens 6ES5941-7UA12Siemens 6ES5921-3WB12Siemens 6ES5541-8AA11

Confirm the complete order code and installed-system requirements before selecting a replacement.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

3500/70M 135489-01 Order Guide

Selection checks for the complete 3500/70M 135489-01 identity and installed arrangement.
1Identify the complete assemblySpecify 3500/70M 135489-01 and retain the supplied hardware revision and installed rack position.
2Map the field connectionsRetain the four field-loop terminal assignments and the barrier installation.
3Check the connected equipmentCheck the actual accelerometers and the approved four-input loop arrangement.
4Retain the configurationRestore the paired impulse, acceleration or reciprocating-velocity function and alarm settings.
5Review site conditionsCoordinate compressor protection, controlled testing and return-to-service requirements.
6Coordinate the replacementProvide the quantity, delivery destination and controlled verification requirements before the replacement window.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Check the complete ordering code and the installed interface requirements before selection.
General ElectricIC200BEM104

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200CHS003

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAA007

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL004

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL005

Match the complete model, revision and required installed function before ordering.

Specialist model
General ElectricIC200UAL006

Match the complete model, revision and required installed function before ordering.

Specialist model
Nordwel customer support

Company Services & FAQ

Practical support for 3500/70M 135489-01 selection, quotation and order coordination.

Company services

Component and installation checkReview the complete ordering identity, actual interfaces and installed configuration before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

3500/70M 135489-01 FAQ

What does 3500/70M 135489-01 supply to a reciprocating monitoring rack?It supplies the internal-barrier I/O assembly with internal terminations. The spare list identifies a four-Prox/Accel arrangement, and the barrier figure shows connection of four accelerometer sensors.
Which machine areas are associated with 3500/70M 135489-01 applications?The matched reciprocating monitor is used for compressor crankcase and crosshead vibration. Select and configure the sensor circuits for those locations rather than treating the I/O spare as a general-purpose machine controller.
What monitor functions can use 3500/70M 135489-01 inputs?The configured monitor offers Impulse Acceleration, Acceleration 2, Recip Velocity and Low Frequency Recip Velocity. The installed sensor interface, scaling and channel-pair selection must agree with the required function.
Does 3500/70M 135489-01 itself calculate reciprocating velocity?The rear I/O routes the field signals through the internal-barrier arrangement. Calculation, configured static values and alarm comparison are performed by the matched front monitor.
How are measurement choices grouped when using 3500/70M 135489-01?The four-channel monitor is programmed in pairs. Channels 1 and 2 perform one selected function, while channels 3 and 4 can perform another or the same function. Preserve those assignments during replacement.
Is 3500/70M 135489-01 an external-termination assembly?No. This spare has internal terminations and internal barriers. Keep the installed rack-side sensor connections and barrier-loop arrangement rather than substituting a remote termination-block layout.
What should be verified for a 3500/70M 135489-01 accelerometer loop?Check the actual sensor, channel assignment, scaling and approved barrier installation together. The four-sensor hardware arrangement does not by itself establish that an arbitrary accelerometer and cable loop are suitable.
Can a 3500/70M 135489-01 replacement be accepted from connector fit alone?Connector fit is only a mechanical check. Verify the complete spare identity, internal wiring, barrier loop and the configured reciprocating measurement before accepting the replacement for monitoring service.
Where should alert and danger behavior be checked with 3500/70M 135489-01?Check the configured static values and alarm selections in the front monitor project. The required thresholds and plant response depend on the chosen measurement and machine application, not on the rear I/O part number alone.
What is the final commissioning check for 3500/70M 135489-01?Confirm sensor-loop integrity, healthy channel status and the expected compressor-vibration response. Then verify the relevant configured alarms under the approved procedure while maintaining the required machinery protection coverage.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada 3500/70M support

Applications & Why Choose Nordwel

Engineering uses of 3500/70M 135489-01 within the matched monitoring installation.

Application areas

01Compressor crankcase vibrationConnect the approved sensors used by the configured crankcase monitoring channels.
02Crosshead vibration measurementsProvide the barrier-equipped field interface for crosshead monitoring inputs.
03Reciprocating impulse analysis pathsCarry the input signals for the monitor impulse-acceleration function.
04Low-frequency reciprocating monitoringSupport the configured low-frequency velocity measurement while preserving sensor scaling and channel-pair setup.

Why choose Nordwel

Configuration-aware supportReview the component identity, fitted interfaces and installed monitoring arrangement before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final selection depends on the complete ordering identity, hardware revision, connected interfaces and installed configuration.
Need help matching 3500/70M 135489-01 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp