other
Products
General Electric IC600CB516 CCM2 serial communications control board product view
General Electric IC600CB516 CCM2 serial communications control board product view
General Electric IC600CB516 CCM2 serial communications control board product view

General Electric IC600CB516 ccm2 serial communications control board

EMAIL SALES
Series Six
IC600CB516 — CCM2 serial communications control board

IC600CB516 provides the covered CCM2 serial communication function. Match the electrical interface, configured rate and ladder-initiated exchange with the connected device before accepting the communication path.

General ElectricSeries SixCCM2Two RS-232/RS-422 ports
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC600CB516 product profile
ManufacturerGeneral Electric
Exact modelIC600CB516
Product typeCCM2 serial communications control board
Product familySeries Six
Primary roleExchanges application data over serial links
Interface contextTwo RS-232/RS-422 ports
  • Brand:

    General Electric
  • Item NO.:

    IC600CB516
IC600CB516 configuration inquiry

Get a precise quote for IC600CB516

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

CCM2 serial communications control board configuration

IC600CB516 provides the covered CCM2 serial communication function. Match the electrical interface, configured rate and ladder-initiated exchange with the connected device before accepting the communication path.

System roleIC600CB516 provides the covered CCM2 serial communication function. Match the electrical interface, configured rate and ladder-initiated exchange with the connected device before accepting the communication path.
Electrical integrationMatch RS-232 or RS-422 wiring to the selected port and installed cable conditions.
Configuration reviewRetain port parameters and the ladder SCREQ request arrangement.
CommissioningTest the requested data transfer and its application handling at both ends of each link.

Engineering selection points

  • Communication function: CCM2.
  • Serial interfaces: 2 ports; RS-232/RS-422.
  • Maximum listed rate: 38.4 kbaud.
  • Application initiation: Ladder SCREQ instruction.
Official product data

IC600CB516 key specifications

Communication functionCCM2
Serial interfaces2 ports; RS-232/RS-422
Maximum listed rate38.4 kbaud
Application initiationLadder SCREQ instruction
RS-232 point-to-point distanceUp to 15 m under the documented conditions
RS-422 point-to-point distanceUp to 1200 m subject to rate, wiring and installation conditions

Technical reference: GEK-96602A Series Six communications-control system documentation.

Pre-order check 01

Installation environment

Check the mounting, connection and operating conditions for this exact configuration before installation.

  • Preserve port wiring and the application’s communication parameters before isolation.
  • Confirm each connected device and its serial electrical interface.
  • Review route length, rate and cable conditions as a combined connection check.
  • Restore the configured requests and validate actual transferred data under controlled conditions.
Record the installed arrangement and the final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete item to its field interface, mechanical arrangement and configured system.

Complete item
Retain IC600CB516 and record the supplied board revision.
Installed assembly
Two RS-232/RS-422 ports.
Electrical conditions
Match RS-232 or RS-422 wiring to the selected port and installed cable conditions.
Configuration
Retain port parameters and the ladder SCREQ request arrangement.
Acceptance
Test the requested data transfer and its application handling at both ends of each link.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Recommended model families

More General Electric models

General Electric selections 01General Electric DS200SVIAG1AGeneral Electric DS200SPCBG1AGeneral Electric DS200SLCCG2A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 02General Electric DS200SHVIG1AGeneral Electric DS200PTCTG1AGeneral Electric DS200PLIBG1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 03General Electric DS200PANAH1AGeneral Electric DS200FHVAG1AGeneral Electric DS200FCGDH1A

Match the complete ordering code and installed-system requirements before selection.

General Electric selections 04General Electric DS200EXPSG1ABBGeneral Electric DS200EXDEG1AGeneral Electric DS200DMCBG2AKG

Match the complete ordering code and installed-system requirements before selection.

Additional published brands

Additional Advantage Models

Additional selections 01Bently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 02Bently Nevada 330902-00-95-05-02-05Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 03Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05 MOD 145004-75

Match the complete ordering code and installed-system requirements before selection.

Additional selections 04Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02Bently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02

Match the complete ordering code and installed-system requirements before selection.

Additional selections 05Bently Nevada 129716-XXX-040-15 MOD 166797-0133Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02vibro-meter VM600 RPS6U SIM-275D-24 200-582-200-013

Match the complete ordering code and installed-system requirements before selection.

Additional selections 06PLC 1394C-SJT10-DPLC 1336-PB-SP5APLC 700-HC14Z24

Match the complete ordering code and installed-system requirements before selection.

Additional selections 07PLC 41391-261-52PLC 20F11NC104JA0NNNNNPLC 20F11RC015JA0NNNNN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 08PLC 2098-DSD-020XPLC 2711P-T4W22D8SPLC 2711P-T9W21D8S

Match the complete ordering code and installed-system requirements before selection.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC600CB516 Order Guide

Match the complete configuration to the installed requirement before finalizing the order.
1Confirm the exact itemIC600CB516 — CCM2 serial communications control board.
2Check the field interfaceTwo RS-232/RS-422 ports.
3Review the installationPreserve port wiring and the application’s communication parameters before isolation.
4Match the configured systemRetain IC600CB516 and record the supplied board revision.
5Agree the supplied scopeConfirm the requested quantity, condition, package contents and destination with the quotation.
6Plan a controlled acceptanceMatch the complete supplied identity, board revision and installed circuit requirements before operational release.

Middle East Demand & Specialist Models

Selected published product references for regional projects and installed-system maintenance.

Published references for regional project selection.
Confirm the exact part number before ordering.
Siemens6ES5921-3WB12

CPU921 central processing unit. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5541-8AA11

CP541 L2 communication processor. Match the complete configuration and supplied scope.

Published model reference
Siemens6ES5470-4UC13

470-4 eight-channel analog output module. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5465-4UA13

465-4 sixteen-channel analog input module. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5464-8MF21

464 two-channel Pt100 input module. Match the complete configuration and supplied scope.

Specialist brand
Siemens6ES5464-8ME11

464-8 four-channel analog current input module. Match the complete configuration and supplied scope.

Specialist brand
Nordwel customer support

Company Services & FAQ

Configuration and order support for General Electric IC600CB516.

Company services

Model & configuration checkReview the complete item and two rs-232/rs-422 ports requirements before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC600CB516 FAQ

Which communication function is provided by IC600CB516?It is the covered CCM2 communications-control board. Match the application exchange and actual board revision rather than treating it as a generic replacement for any serial card.
How many serial connections can be configured?The documented board provides two ports with RS-232/RS-422 interfaces. Record the purpose and electrical arrangement of each connected endpoint.
What is the maximum listed serial rate?The listed maximum is 38.4 kbaud. The usable installation still depends on the selected interface, cable length and endpoint configuration.
How does the controller application initiate an exchange?The covered arrangement uses a ladder SCREQ instruction. Preserve the request setup and application handling when restoring the communications board.
What distance is documented for point-to-point RS-232?The documented limit is up to 15 m under the stated installation conditions. Do not apply the longer differential-interface distance to an RS-232 connection.
Can an RS-422 link always run 1200 m at maximum rate?The 1200 m point-to-point figure is conditional on rate, wiring and installation. Assess those conditions together rather than combining every separate maximum into one guaranteed operating point.
Does swapping the two port cables preserve the application automatically?No. Each port can serve a different endpoint and request arrangement. Restore cable identity and configured parameters to the intended port.
What should be checked when requests are issued but data is not received?Compare the SCREQ setup, selected port, endpoint parameters and electrical wiring. Check both the transfer result and how the application interprets the response.
Should another communications board’s pinout be reused?Use the connection requirements for the actual board and port configuration. Similar connectors do not establish identical signal assignments.
What demonstrates a successful CCM2 restoration?Show that the intended requests complete, the receiving endpoint interprets the data correctly and the controller handles responses as designed. Retain final port settings and tested cable identities.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series Six

Applications & Why Choose Nordwel

Engineering contexts for IC600CB516 and the available order-coordination support.

Application areas

01Ladder-initiated serial exchangeConnect SCREQ-driven controller functions to compatible endpoints.
02Two-port device integrationMaintain separate device identities and settings.
03Long differential-link planningAssess RS-422 distance together with cable and rate conditions.
04Communication spare acceptanceValidate application data, not only cable continuity.

Why choose Nordwel

Configuration-aware supportReview the exact item, two rs-232/rs-422 ports and installed-system requirements before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Match the complete supplied identity, board revision and installed circuit requirements before operational release.
Need help matching IC600CB516?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp