other
Products
Siemens 6ES7155-5BA00-0AB0 IM155-5 DP ST interface module product image
Siemens 6ES7155-5BA00-0AB0 IM155-5 DP ST interface module product image
Siemens 6ES7155-5BA00-0AB0 IM155-5 DP ST interface module product image

Siemens 6ES7155-5BA00-0AB0 IM155-5 DP ST interface module

EMAIL SALES
ET 200MP PROFIBUS
6ES7155-5BA00-0AB0 — IM155-5 DP ST interface module

Connect an ET 200MP distributed station to PROFIBUS DP using the IM155-5 DP ST interface. Match the fitted module sequence and hardware version to the controller configuration before planning an interface exchange.

SiemensET 200MP PROFIBUSIM155-5 DP STConfigured DP station with up to 12 I/O modules
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7155-5BA00-0AB0 product profile
ManufacturerSiemens
Exact model6ES7155-5BA00-0AB0
Product typeIM155-5 DP ST interface module
Product familyET 200MP PROFIBUS
Primary roleConnects ET 200MP I/O to PROFIBUS DP
Interface contextConfigured DP station with up to 12 I/O modules
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7155-5BA00-0AB0
6ES7155-5BA00-0AB0 configuration inquiry

Get a precise quote for 6ES7155-5BA00-0AB0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IM155-5 DP ST interface module configuration

The interface serves a configured PROFIBUS station with a documented I/O-module limit. Physical envelope, module order and hardware functional status all contribute to replacement planning.

Control-system purposeConnects ET 200MP I/O to PROFIBUS DP.
Connection arrangementConfigured DP station with up to 12 I/O modules.
Installation planningRetain the existing mounting, terminal arrangement and configured station-module sequence.
Commissioning evidencePreserve the station address, electronic-module sequence and expected I/O mapping.

Engineering selection points

  • Fieldbus: PROFIBUS DP.
  • Maximum supported I/O-module count: 12 applicable I/O modules.
  • Module width: 35 mm.
  • Module height: 147 mm.
Official product data

6ES7155-5BA00-0AB0 key specifications

Interface designationIM155-5 DP ST
Station platformET 200MP
FieldbusPROFIBUS DP
Maximum supported I/O-module count12 applicable I/O modules
Module width35 mm
Module height147 mm
Module depth129 mm

Siemens exact-order IM155-5 DP ST data; environmental extensions require the specified hardware functional status.

Pre-order check 01

Installation environment

Check the mounting, connection and operating conditions for this exact configuration before installation.

  • Secure the process and isolate the required station power before removing the interface.
  • Retain the existing mounting, terminal arrangement and configured station-module sequence.
  • Check DP addressing, bus connections and the required termination before applying the operating configuration.
  • Confirm environmental limits against the installed hardware functional status, not a later revision alone.
Record the installed arrangement and the final controlled checks in the commissioning file.
Pre-order check 02

Compatibility confirmation

Match the complete item to its field interface, mechanical arrangement and configured system.

Interface protocol
Match the DP ST version and PROFIBUS network rather than a similar PN interface.
Station size
Use no more than the supported 12 applicable I/O modules and verify the permitted module combination.
Physical envelope
Allow for the 35 × 147 × 129 mm module envelope plus the installed connection arrangement.
Hardware functional status
Check the physical unit version before applying revision-dependent environmental limits.
Controller project
Preserve the station address, electronic-module sequence and expected I/O mapping.
Verify the DP protocol, supported station size and physical hardware version before accepting the replacement.
Recommended model families

More Siemens models

Siemens selections 01Siemens 6GK1143-0AA01Siemens 6ES5951-7LB21Siemens 6ES5948-3UA23

Match the complete ordering code and installed-system requirements before selection.

Siemens selections 02Siemens 6ES5948-3UA13Siemens 6ES5945-7UA23Siemens 6ES5941-7UA12

Match the complete ordering code and installed-system requirements before selection.

Siemens selections 03Siemens 6ES5921-3WB12Siemens 6ES5541-8AA11Siemens 6ES5470-4UC13

Match the complete ordering code and installed-system requirements before selection.

Siemens selections 04Siemens 6ES5465-4UA13Siemens 6ES5464-8MF21Siemens 6ES5464-8ME11

Match the complete ordering code and installed-system requirements before selection.

Additional published brands

Additional Advantage Models

Additional selections 01Bently Nevada 330876-03-10-00-00Bently Nevada 330906-02-12-10-02-05Bently Nevada 330902-00-95-05-02-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 02Bently Nevada 330876-01-50-01-05Bently Nevada 330851-01-000-020-10-00-00Bently Nevada 330879-03-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 03Bently Nevada 330851-02-000-040-10-00-05Bently Nevada 330180-X1-05 MOD 145004-75Bently Nevada 330851-02-000-080-90-01-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 04Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02Bently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02Bently Nevada 129716-XXX-040-15 MOD 166797-0133

Match the complete ordering code and installed-system requirements before selection.

Additional selections 05Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02vibro-meter VM600 RPS6U SIM-275D-24 200-582-200-013Bently Nevada 330854-080-25-05

Match the complete ordering code and installed-system requirements before selection.

Additional selections 06Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00Bently Nevada 330130-075-01-00

Match the complete ordering code and installed-system requirements before selection.

Additional selections 07Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05Bently Nevada 330103-02-04-10-02-CN

Match the complete ordering code and installed-system requirements before selection.

Additional selections 08Bently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CNBently Nevada 330903-00-07-10-01-CN

Match the complete ordering code and installed-system requirements before selection.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7155-5BA00-0AB0 Order Guide

Match the complete configuration to the installed requirement before finalizing the order.
1Confirm the exact item6ES7155-5BA00-0AB0 — IM155-5 DP ST interface module.
2Check the field interfaceConfigured DP station with up to 12 I/O modules.
3Review the installationSecure the process and isolate the required station power before removing the interface.
4Match the configured systemMatch the DP ST version and PROFIBUS network rather than a similar PN interface.
5Agree the supplied scopeConfirm the requested quantity, condition, package contents and destination with the quotation.
6Plan a controlled acceptanceVerify the DP protocol, supported station size and physical hardware version before accepting the replacement.

Middle East Demand & Specialist Models

Selected published product references for regional projects and installed-system maintenance.

Published references for regional project selection.
Confirm the exact part number before ordering.
Bently Nevada330854-080-25-05

armored 3300 XL 25 mm extension cable. Match the complete configuration and supplied scope.

Published model reference
Bently Nevada330854-080-24-05

3300 XL 25 mm extension cable. Match the complete configuration and supplied scope.

Published model reference
Bently Nevada330130-070-01-00

armored 3300 XL 8 mm extension cable. Match the complete configuration and supplied scope.

Specialist brand
Bently Nevada330130-075-01-00

armored 3300 XL 8 mm extension cable. Match the complete configuration and supplied scope.

Specialist brand
Bently Nevada330104-00-08-15-02-00

armored 3300 XL 8 mm metric proximity probe. Match the complete configuration and supplied scope.

Specialist brand
Bently Nevada330102-00-12-10-01-05

armored 3300 XL 8 mm proximity probe. Match the complete configuration and supplied scope.

Specialist brand
Nordwel customer support

Company Services & FAQ

Configuration and order support for Siemens 6ES7155-5BA00-0AB0.

Company services

Model & configuration checkReview the complete item and configured dp station with up to 12 i/o modules requirements before quotation.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7155-5BA00-0AB0 FAQ

What network role does 6ES7155-5BA00-0AB0 perform?It is the IM155-5 DP ST interface connecting an ET 200MP distributed-I/O station to PROFIBUS DP. It is not the PROFINET version of the station interface.
How many I/O modules can the interface support?The exact-product information lists up to 12 applicable I/O modules. The permitted module combination and station configuration must still be checked for the installation.
What is the width of the DP ST interface?The documented width is 35 mm. Add the rest of the station hardware and the applicable mounting and wiring space when planning the assembly.
What height and depth should be allowed for 6ES7155-5BA00-0AB0?The module is listed as 147 mm high and 129 mm deep. Connector and cable clearances should be checked in addition to the module envelope.
Can a DP and a PN station interface be treated as the same replacement?No. Check the actual protocol, complete ordering code and controller project. A similar housing or common ET 200MP platform does not establish an identical communication interface.
Is the low-temperature limit identical on every hardware revision?No. The manufacturer ties the stated extended low-temperature use to the required hardware functional status, including FS04 and later. Confirm the physical unit before applying that allowance.
What should be checked at the PROFIBUS connection before startup?Check the bus connections and required termination against the installed PROFIBUS layout. Confirm that the station address agrees with the controller configuration before enabling normal I/O exchange.
Which configuration records should be kept for a DP ST exchange?Keep the station address, configured module order, I/O mapping and relevant parameters. These identify the station expected by the controller after the interface is replaced.
What should be inspected if the DP station reports a module mismatch?Compare the fitted I/O-module sequence and permitted station arrangement with the controller project. Check the complete interface identity as well as physical bus connections.
When is it appropriate to release 6ES7155-5BA00-0AB0 back to normal service?After the replacement identity, station configuration and diagnostic state have been confirmed and the required I/O functions pass a controlled test. Follow the site procedure for restoring operating authority.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens ET 200MP PROFIBUS

Applications & Why Choose Nordwel

Engineering contexts for 6ES7155-5BA00-0AB0 and the available order-coordination support.

Application areas

01ET 200MP DP stationsProvide the controller-facing PROFIBUS interface for applicable distributed I/O.
02Twelve-module station planningCheck the configured module count and permitted combination before assembly.
03Revision-aware installationsMatch the hardware functional status to the required environmental conditions.
04Fieldbus replacement recoveryRestore station addressing and I/O mapping after interface maintenance.

Why choose Nordwel

Configuration-aware supportReview the exact item, configured dp station with up to 12 i/o modules and installed-system requirements before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Verify the DP protocol, supported station size and physical hardware version before accepting the replacement.
Need help matching 6ES7155-5BA00-0AB0?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp