An S7-1200 CPU 1211C with AC supply, six 24 V DC digital inputs, four 2 A relay outputs, two 0–10 V analog inputs and 75 KB work memory. The documented supply range is 85–264 V AC at 47–63 Hz.
Brand:
SIEMENSItem NO.:
6ES7211-1BE40-0XB0Part Number:
6ES7211-1BE40-0XB0Weight:
420 gDimensions:
90 × 100 × 75 mmCertification:
Official Siemens documentation verifiedDescription:
A S7-1200 CPU 1211C with AC supply, six 24 V DC digital inputs, four 2 A relay outputs, two 0–10 V analog inputs and 75 KB work memory.Siemens identifies 6ES7211-1BE40-0XB0 as CPU 1211C AC/DC/relay compact controller. A S7-1200 CPU 1211C with AC supply, six 24 V DC digital inputs, four 2 A relay outputs, two 0–10 V analog inputs and 75 KB work memory.
Published controller products with verified Tiffany Guan contact details.
Published Siemens field-I/O products with verified sales contacts.
Published monitoring products with verified Tiffany Guan contact details.
Additional published automation products with verified sales contacts.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
Use the exact manufacturer order number and verify the system constraints before procurement.
Keep 6ES7211-1BE40-0XB0 intact, including the -0XB0 suffix, on the quotation and nameplate check.
Match the controller power and output architecture to 85–264 V AC, 47–63 Hz with 2 A relay outputs; do not substitute a different CPU electrical code.
Confirm the project fits 6 DI / 4 relay DQ plus the two integrated 0–10 V analog inputs.
Use the Siemens data sheet firmware and STEP 7 version listed for the exact article before downloading a project.
Document PROFINET devices, communication connections, signal boards and any SM/CM expansion in the complete station.
Back up the program, technology settings, web content and device configuration before hardware replacement.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquiryS7-200 SMART RS485 communication board.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Siemens official product documentation for this exact order number.
A Siemens S7-1200 CPU 1211C with AC power, 24 V DC inputs and 2 A relay outputs.
Six digital inputs, four relay digital outputs and two 0–10 V analog inputs.
85–264 V AC at 47–63 Hz.
75 KB, with 2 MB integrated load memory.
The current data sheet lists firmware V4.7 and STEP 7 V20 or higher.
No. This electrical version uses relay outputs; select and verify a transistor-output CPU for integrated pulse outputs.
90 × 100 × 75 mm and approximately 420 g.
LAD, FBD and SCL.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Use the verified electrical, lifecycle and system limits—not generic family assumptions—to decide suitability.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
