other
Products
X20CSL8100 Coated SafeLOGIC Controller
X20CSL8100 Coated SafeLOGIC Controller
X20CSL8100 Coated SafeLOGIC Controller

B&R X20CSL8100 Coated SafeLOGIC Controller

EMAIL SALES
B&R official data reviewed
X20CSL8100 — Coated SafeLOGIC Controller

A coated SafeLOGIC controller with a POWERLINK interface, openSAFETY management for up to 100 SafeNODEs and fanless IP20 construction.

Coated X20 safety controllersopenSAFETY management for distributed safety nodesExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyCoated X20 safety controllers
Exact modelX20CSL8100
Verified functionopenSAFETY management for distributed safety nodes
Interface boundaryTwo-port 100BASE-TX POWERLINK hub with shielded RJ45 connections
Power consumption4.3 W
Selection basisConfirm SafeKEY/function range, SafeNODE count, network cycle and installation temperature.
  • Brand:

    Others
  • Item NO.:

    X20CSL8100
  • Goods Stock:

    1
  • Part Number:

    X20CSL8100
  • Description:

    A coated SafeLOGIC controller with a POWERLINK interface, openSAFETY management for up to 100 SafeNODEs and fanless IP20 construction.
X20CSL8100 configuration inquiry

Get a precise quote for X20CSL8100

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

X20CSL8100 official identification

A coated SafeLOGIC controller with a POWERLINK interface, openSAFETY management for up to 100 SafeNODEs and fanless IP20 construction.

System roleopenSAFETY management for distributed safety nodes
Connection boundaryTwo-port 100BASE-TX POWERLINK hub with shielded RJ45 connections
Selection focusConfirm SafeKEY/function range, SafeNODE count, network cycle and installation temperature.
Release evidenceOfficial stylization record, SafeKEY identity, node inventory and validated safety-function test

Engineering and installation checks

  • undefined
  • Insert the separately selected SafeKEY only after the approved function range is confirmed.
  • Manufacturer verification basis: B&R X20cSL8100 official product record.
Official product data

X20CSL8100 key specifications

Official stylization X20cSL8100
SafeNODE capacity Up to 100
Network POWERLINK 100BASE-TX
Transfer rate 100 Mbit/s
Network ports 2 shielded RJ45
Maximum segment 100 m
Minimum cycle 200 µs
Supply 24 VDC, −15% / +20%
Maximum current 0.25 A
Power consumption 4.3 W
Protection IP20
Dimensions 62.5 × 99 × 75 mm
Approximate weight 190 g

Source: B&R X20cSL8100 official product record.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of X20CSL8100.

  • Insert the separately selected SafeKEY only after the approved function range is confirmed.
  • Keep each copper network segment at or below 100 m and terminate shields correctly.
  • Use an IP20 enclosure and observe the documented orientation-dependent temperature limits.
  • Validate every safety node and controlled function under the project safety procedure.
Record the as-found condition and the final official stylization record, safekey identity, node inventory and validated safety-function test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for X20CSL8100 before purchase approval.

Safety manager
openSAFETY, maximum 100 SafeNODEs
Network layer
POWERLINK at 100 Mbit/s
Keying item
Configured SafeKEY required
Power input
24 VDC within −15% / +20%
Functional level
Project must retain its validated safety architecture
Final selection: Use only the values published for X20CSL8100 in B&R X20cSL8100 official product record; site suitability remains an engineering decision.
Recommended model families

Verified Cross-Brand Models

Tiffany verified models 01Siemens 6ES7654-7HB00-0XA0Siemens 6ES7654-7HC00-0XA0ABB AI563

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB AO568ABB CD522ABB CI541-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB CI542-DPABB CI592-CS31ABB CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Yokogawa ATSS3D-0Siemens 6ES7357-4AH01-0AE0Siemens 6ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02Siemens 6ES7414-2XG02-0AB0Siemens 6ES7416-2XL01-0AB0Siemens 6ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6ES7515-2AN03-0AB0Siemens 6ES7517-3UP00-0AB0Siemens 6ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04B&R 8BVI0330HWS0.000-1B&R X20IF2181-2B&R 8B0C0320HW00.000-1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Siemens 7MH4900-3AA01Siemens 6GK1161-6AA02Siemens 6FC5370-5AA20-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06Siemens 6SL3120-1TE15-0AA4Siemens 6SL3040-0LA00-0AA1Siemens 6ES7157-0AA82-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Siemens 6SL3352-3AG38-8AA0Siemens 6ES7407-0RA01-0AA0Siemens 6AG1155-6AU01-7BN0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Siemens 6ES5305-7LA11Siemens 6ES7551-1AB00-0AB0Siemens 6ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

X20CSL8100 Order Guide

Use the complete B&R designation and installed hardware record for engineering review.
1Ordering identityX20CSL8100
2Official evidenceB&R X20cSL8100 official product record
3Installation surveyKeep each copper network segment at or below 100 m and terminate shields correctly.
4Compatibility gateopenSAFETY, maximum 100 SafeNODEs
5Commissioning recordOfficial stylization record, SafeKEY identity, node inventory and validated safety-function test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected verified product pages for regional replacement and project inquiries.

Target pages display Tiffany Guan contact details.
Confirm the exact part number before ordering.
ABB / ENGINEERING CROSS-CHECKCD522

Retain the exact suffixes when preparing the project procurement record.

Tiffany-verified target
ABB / REPLACEMENT REVIEWCI541-DP

Check the linked model against drawings and the as-built equipment register.

Tiffany-verified target
ABB / PROJECT MATCHCI542-DP

Record the target-page identity in the receiving inspection package.

Tiffany-verified target
ABB / ORDER-CODE CHECKCI592-CS31

Treat nearby family codes as alternatives only after an engineering check.

Tiffany-verified target
ABB / MAINTENANCE REFERENCECM5640-2ETH

Use Tiffany contact details on the linked page for order clarification.

Tiffany-verified target
ABB / COMPATIBILITY REVIEWCM582-DP

Verify quantity, site context and delivery requirements in one inquiry.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact X20CSL8100 source record named on this page.
Interface reviewTwo-port 100BASE-TX POWERLINK hub with shielded RJ45 connections
Receiving checkConfirm SafeKEY/function range, SafeNODE count, network cycle and installation temperature.
Release packageOfficial stylization record, SafeKEY identity, node inventory and validated safety-function test

X20CSL8100 FAQ

What field observation validates keying item for X20CSL8100 Coated SafeLOGIC Controller?

The official X20CSL8100 record gives keying item as Configured SafeKEY required for its coated safelogic controller function. For distributed machine safety, insert the separately selected SafeKEY only after the approved function range is confirmed. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

What fault could result from misreading official stylization on X20CSL8100 Coated SafeLOGIC Controller?

For this opensafety management for distributed safety nodes selection, official stylization is X20cSL8100. For multi-node safe motion cell, keep each copper network segment at or below 100 m and terminate shields correctly. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

What photograph or measurement proves transfer rate on received X20CSL8100 Coated SafeLOGIC Controller?

Use 100 Mbit/s as the controlled transfer rate value in the Coated X20 safety controllers review. For safety-network modernization, use an IP20 enclosure and observe the documented orientation-dependent temperature limits. Mark the evidence source and revision so future reviewers can reproduce the decision.

Which minimum cycle value identifies the reviewed X20CSL8100 Coated SafeLOGIC Controller configuration?

Minimum cycle is published as 200 µs for the Coated X20 safety controllers. For coated control cabinet, validate every safety node and controlled function under the project safety procedure. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

Why does power consumption matter when selecting X20CSL8100 Coated SafeLOGIC Controller?

The official X20CSL8100 record gives power consumption as 4.3 W for its coated safelogic controller function. For distributed machine safety, insert the separately selected SafeKEY only after the approved function range is confirmed. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

Which mismatch involving approximate weight should stop approval of X20CSL8100 Coated SafeLOGIC Controller?

For this opensafety management for distributed safety nodes selection, approximate weight is 190 g. For multi-node safe motion cell, keep each copper network segment at or below 100 m and terminate shields correctly. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

What maintenance record preserves the keying item evidence for X20CSL8100 Coated SafeLOGIC Controller?

Use Configured SafeKEY required as the controlled keying item value in the Coated X20 safety controllers review. For safety-network modernization, use an IP20 enclosure and observe the documented orientation-dependent temperature limits. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

How does official stylization limit a proposed X20CSL8100 Coated SafeLOGIC Controller substitute?

Official stylization is published as X20cSL8100 for the Coated X20 safety controllers. For coated control cabinet, validate every safety node and controlled function under the project safety procedure. Use the value as a selection boundary, not as a prediction of site performance.

How can a technician test X20CSL8100 Coated SafeLOGIC Controller without exceeding the stated transfer rate?

The official X20CSL8100 record gives transfer rate as 100 Mbit/s for its coated safelogic controller function. For distributed machine safety, insert the separately selected SafeKEY only after the approved function range is confirmed. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.

When can the X20CSL8100 Coated SafeLOGIC Controller minimum cycle entry be released for quotation?

For this opensafety management for distributed safety nodes selection, minimum cycle is 200 µs. For multi-node safe motion cell, keep each copper network segment at or below 100 m and terminate shields correctly. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Coated X20 safety controllers application review

X20CSL8100 Applications

These contexts use the manufacturer-documented function of X20CSL8100; each requires a separate site-fit decision.

Application contexts

01 · Distributed machine safetyApply the documented opensafety management for distributed safety nodes only after confirming safety manager as openSAFETY, maximum 100 SafeNODEs.
02 · Multi-node safe motion cellApply the documented opensafety management for distributed safety nodes only after confirming network layer as POWERLINK at 100 Mbit/s.
03 · Safety-network modernizationApply the documented opensafety management for distributed safety nodes only after confirming keying item as Configured SafeKEY required.
04 · Coated control cabinetApply the documented opensafety management for distributed safety nodes only after confirming power input as 24 VDC within −15% / +20%.

Why choose Nordwel

Traceable identityX20CSL8100 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to opensafety management for distributed safety nodes, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain X20CSL8100, Two-port 100BASE-TX POWERLINK hub with shielded RJ45 connections, and the approved site record as three independent checks.
Need help matching this B&R configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp