A forward-mount 146054 ceramic-capped probe with 3.4 in case, 2.0 m lead, option 02 ClickLoc standard cable and multiple approvals, for front-end exposure to corrosive or high-pressure media.
Brand:
Bently NevadaItem NO.:
146054-034-20-02-05Goods Stock:
1Part Number:
146054-034-20-02-05Weight:
See exact manufacturer shipment dataDimensions:
3.4 in case; 2.0 m leadCertification:
05 — CSA, ATEX and IECExDescription:
A forward-mount 146054 ceramic-capped probe with 3.4 in case, 2.0 m lead, option 02 ClickLoc standard cable and multiple approvals, for front-end exposure to corrosive or high-pressure media.Bently Nevada identifies 146054-034-20-02-05 as 3/8-24 UNF ceramic-capped proximity probe. A forward-mount 146054 ceramic-capped probe with 3.4 in case, 2.0 m lead, option 02 ClickLoc standard cable and multiple approvals, for front-end exposure to corrosive or high-pressure media.
Published controller products with verified Tiffany Guan contact details.
Published Siemens field-I/O products with verified sales contacts.
Published monitoring products with verified Tiffany Guan contact details.
Additional published automation products with verified sales contacts.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
Use the exact manufacturer order number and verify the system constraints before procurement.
Quote 146054-034-20-02-05 exactly, including leading zeros, country suffixes and any MOD reference.
Confirm whether the order is for a probe, cable, sensor, transmitter, housing, accessory or control module.
Check thread, connector, mounting, cable length, power and field wiring against the installed drawings.
Do not mix unmatched transducer-system lengths, families, calibrations or host platforms.
Confirm the destination hazardous-area and country approval requirement from the current manufacturer record.
Provide a clear nameplate photograph and the equipment drawing with the commercial inquiry.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquirySIMATIC S7-200 SMART RS485 communication board.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Bently Nevada official product documentation for this exact order number.
A 3/8-24 UNF unarmored ceramic probe with 3.4 in case, 2.0 m lead, option 02 ClickLoc cable and multiple approvals.
Alumina ceramic, with an AISI 304 stainless-steel probe case.
No. The official data sheet says 146054 seals the front interface but its rear is not protected from destructive media.
34 bar, or 500 psi, for the standard ceramic-capped probe.
Option 034 is 3.4 in.
Option 05 covers CSA, ATEX and IECEx.
No. The ceramic-capped system curve is shifted; the official range and monitor setup require special attention.
The data sheet lists 1.0 mm.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Use the verified electrical, lifecycle and system limits—not generic family assumptions—to decide suitability.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
