A safety I/O module with eight type-A inputs, four pulse outputs and six type-B2 OSSD outputs rated at 0.2 A.
Brand:
OthersItem NO.:
X20SC0806Goods Stock:
1Part Number:
X20SC0806Description:
A safety I/O module with eight type-A inputs, four pulse outputs and six type-B2 OSSD outputs rated at 0.2 A.A safety I/O module with eight type-A inputs, four pulse outputs and six type-B2 OSSD outputs rated at 0.2 A.
| Safe inputs | 8, type A |
|---|---|
| Test pulse outputs | 4 |
| Safe outputs | 6, type B2 |
| Output rating | 24 VDC, 0.2 A |
| OSSD test gap | Less than 10 µs |
| Safety level | SIL 3, Category 4, PL e |
| Supply | 24 VDC −15/+20% |
| Protection | IP20 |
| Module pitch | 25 mm |
Source: B&R X20SC0806 official product record.
Review the physical, electrical and environmental conditions that control installation of X20SC0806.
Close each documented selection boundary for X20SC0806 before purchase approval.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Digital-input reference for signal and channel review.
Tiffany-verified targetPosition-input reference for signal and interface review.
Tiffany-verified targetProcessor reference for controller compatibility and configuration review.
Tiffany-verified targetCANopen master reference for field-network planning.
Tiffany-verified targetCommunication-interface reference for protocol compatibility review.
Tiffany-verified targetCANopen slave reference for device-network integration.
Tiffany-verified targetFor this safety-related input and ossd output processing selection, supply is 24 VDC −15/+20%. For emergency-stop circuits, work only under the approved machine-safety change process. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.
Use Within SIL 3 / Category 4 / PL e design as the controlled safety target value in the X20 safety I/O review. For guard monitoring, map test pulses and dual-channel devices before wiring. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.
Supply is published as 24 VDC within −15/+20% for the X20 safety I/O. For safe actuator shutdown, provide the separately required terminal and bus hardware. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.
The official X20SC0806 record gives test pulse outputs as 4 for its x20 safe digital i/o module function. For x20 safety retrofit, execute and sign the full safety validation after configuration. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.
For this safety-related input and ossd output processing selection, ossd test gap is Less than 10 µs. For emergency-stop circuits, work only under the approved machine-safety change process. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.
Use IP20 as the controlled protection value in the X20 safety I/O review. For guard monitoring, map test pulses and dual-channel devices before wiring. Release is appropriate only when the manufacturer value and the project requirement agree.
Input devices is published as Eight type-A safe-input channels for the X20 safety I/O. For safe actuator shutdown, provide the separately required terminal and bus hardware. A substitution review must close functional, mechanical, electrical and environmental differences independently.
The official X20SC0806 record gives validation as Application-specific safety proof required for its x20 safe digital i/o module function. For x20 safety retrofit, execute and sign the full safety validation after configuration. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.
For this safety-related input and ossd output processing selection, safe outputs is 6, type B2. For emergency-stop circuits, work only under the approved machine-safety change process. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.
Use SIL 3, Category 4, PL e as the controlled safety level value in the X20 safety I/O review. For guard monitoring, map test pulses and dual-channel devices before wiring. Mark the evidence source and revision so future reviewers can reproduce the decision.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
