A wall-mounted IP20 servo drive rated at 8.8 A with an integrated braking resistor and one multi-standard encoder interface.
Brand:
OthersItem NO.:
8EI8X8HWS10.0500-1Goods Stock:
1Part Number:
8EI8X8HWS10.0500-1Description:
A wall-mounted IP20 servo drive rated at 8.8 A with an integrated braking resistor and one multi-standard encoder interface.A wall-mounted IP20 servo drive rated at 8.8 A with an integrated braking resistor and one multi-standard encoder interface.
| Input | 3 AC 200–480 V |
|---|---|
| Frequency | 50/60 Hz ±4% |
| Rated current | 8.8 A |
| Encoder interfaces | 1 digital multi-standard |
| Plug-in slots | 1 |
| DC-bus capacitance | 470 µF |
| Brake resistor | Integrated |
| Mounting | Wall |
| Protection | IP20 |
| Dimensions | 66 × 290 × 258.5 mm |
| Weight | 3.2 kg |
Source: B&R 8EI8X8HWS10.0500-1 official product record.
Review the physical, electrical and environmental conditions that control installation of 8EI8X8HWS10.0500-1.
Close each documented selection boundary for 8EI8X8HWS10.0500-1 before purchase approval.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Processor reference for controller compatibility and configuration review.
Tiffany-verified targetMotion-control reference for axis and interface review.
Tiffany-verified targetExact-model reference for ordering-code verification.
Tiffany-verified targetDigital-output reference for load and channel review.
Tiffany-verified targetTriac-output reference for AC load compatibility review.
Tiffany-verified targetDigital I/O reference for channel-assignment review.
Tiffany-verified targetPlug-in slots is published as 1 for the ACOPOS P3 wall-mounted drives. For packaging servo axis, provide an IP20 cabinet and the required vertical cooling path. A substitution review must close functional, mechanical, electrical and environmental differences independently.
The official 8EI8X8HWS10.0500-1 record gives mounting as Wall for its acopos p3 single-axis servo drive function. For precision feed motion, verify the three-phase input and protective conductor. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.
For this single-axis servo power conversion selection, weight is 3.2 kg. For compact machine drive, identify the motor feedback standard before connection. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.
Use Supported digital encoder standard as the controlled feedback value in the ACOPOS P3 wall-mounted drives review. For wall-mounted servo retrofit, complete motor identification and controlled tuning before production. Mark the evidence source and revision so future reviewers can reproduce the decision.
Input is published as 3 AC 200–480 V for the ACOPOS P3 wall-mounted drives. For packaging servo axis, provide an IP20 cabinet and the required vertical cooling path. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.
The official 8EI8X8HWS10.0500-1 record gives encoder interfaces as 1 digital multi-standard for its acopos p3 single-axis servo drive function. For precision feed motion, verify the three-phase input and protective conductor. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.
For this single-axis servo power conversion selection, brake resistor is Integrated. For compact machine drive, identify the motor feedback standard before connection. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.
Use 66 × 290 × 258.5 mm as the controlled dimensions value in the ACOPOS P3 wall-mounted drives review. For wall-mounted servo retrofit, complete motor identification and controlled tuning before production. The commissioning sheet should name the instrument, method, acceptance limit and approving person.
Motor current is published as Within 8.8 A continuous rating for the ACOPOS P3 wall-mounted drives. For packaging servo axis, provide an IP20 cabinet and the required vertical cooling path. Use the value as a selection boundary, not as a prediction of site performance.
The official 8EI8X8HWS10.0500-1 record gives ambient as 5–40 °C nominal, 55 °C maximum for its acopos p3 single-axis servo drive function. For precision feed motion, verify the three-phase input and protective conductor. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
