A compact transmitter documented for one strain-gauge sensor in force-measurement service and retained as a spare part after product cancellation.
Brand:
SIEMENSItem NO.:
7MH4920-0AA01Goods Stock:
1Part Number:
7MH4920-0AA01Description:
A compact transmitter documented for one strain-gauge sensor in force-measurement service and retained as a spare part after product cancellation.A compact transmitter documented for one strain-gauge sensor in force-measurement service and retained as a spare part after product cancellation.
| Sensor channels | 1 |
|---|---|
| Measurement principle | Strain-gauge sensor |
| Primary use | Force measurement |
| Host station | ET 200 S head station |
| Lifecycle | Cancelled 2023-10-23 |
| Availability class | Spare part |
| Weight | 0.1 kg |
| Package size | 6.8 × 9.5 × 3.8 cm |
Source: Siemens 7MH4920-0AA01 official product record.
Review the physical, electrical and environmental conditions that control installation of 7MH4920-0AA01.
Close each documented selection boundary for 7MH4920-0AA01 before purchase approval.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Logic-module reference for control-function compatibility review.
Tiffany-verified targetThermocouple-input reference for signal-range and wiring review.
Tiffany-verified targetProcessor reference for controller compatibility and configuration review.
Tiffany-verified targetTriac-output reference for AC load compatibility review.
Tiffany-verified targetExact-model reference for ordering-code verification.
Tiffany-verified targetDrive-interface reference for motion-system compatibility review.
Tiffany-verified targetPackage size is published as 6.8 × 9.5 × 3.8 cm for the Compact strain-gauge weighing electronics. For load-pin measurement, identify the strain-gauge sensor and bridge data before removal. Log the comparison against the controlled parts list before the item enters the cabinet.
The official 7MH4920-0AA01 record gives measurement task as Force measurement for its siwarex cf force transmitter function. For press force monitoring, keep low-level sensor wiring away from interference sources. Check the mating device, protective hardware and configured function before energization.
For this single-sensor force measurement selection, sensor channels is 1. For fixture load verification, record the module position and station parameters. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.
Use ET 200 S head station as the controlled host station value in the Compact strain-gauge weighing electronics review. For legacy weighing-channel maintenance, perform zero and known-force checks after replacement. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.
Weight is published as 0.1 kg for the Compact strain-gauge weighing electronics. For load-pin measurement, identify the strain-gauge sensor and bridge data before removal. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.
The official 7MH4920-0AA01 record gives station as Approved ET 200 S head station for its siwarex cf force transmitter function. For press force monitoring, keep low-level sensor wiring away from interference sources. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.
For this single-sensor force measurement selection, lifecycle boundary is Spare-part sourcing for a cancelled product. For fixture load verification, record the module position and station parameters. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.
Use Force measurement as the controlled primary use value in the Compact strain-gauge weighing electronics review. For legacy weighing-channel maintenance, perform zero and known-force checks after replacement. Release is appropriate only when the manufacturer value and the project requirement agree.
Availability class is published as Spare part for the Compact strain-gauge weighing electronics. For load-pin measurement, identify the strain-gauge sensor and bridge data before removal. A substitution review must close functional, mechanical, electrical and environmental differences independently.
The official 7MH4920-0AA01 record gives transducer as One compatible strain-gauge sensor for its siwarex cf force transmitter function. For press force monitoring, keep low-level sensor wiring away from interference sources. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
