An IP20 X20 communication module providing one PROFIBUS DP V0/V1 slave interface with local status and data LEDs.
Brand:
OthersItem NO.:
X20IF1063-1Goods Stock:
1Part Number:
X20IF1063-1Description:
An IP20 X20 communication module providing one PROFIBUS DP V0/V1 slave interface with local status and data LEDs.An IP20 X20 communication module providing one PROFIBUS DP V0/V1 slave interface with local status and data LEDs.
| Fieldbus | PROFIBUS DP |
|---|---|
| Network role | Slave |
| Protocol levels | DP V0 and V1 |
| Interfaces | 1 |
| Indicators | Status and data LEDs |
| Protection | IP20 |
| B&R ID | 0xA717 |
| Hazardous-location listing | Class I, Division 2 documented |
Source: B&R X20IF1063-1 official product record.
Review the physical, electrical and environmental conditions that control installation of X20IF1063-1.
Close each documented selection boundary for X20IF1063-1 before purchase approval.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Logic-module reference for control-function compatibility review.
Tiffany-verified targetAnalog-input terminal reference for field-wiring review.
Tiffany-verified targetProcessor reference for controller compatibility and configuration review.
Tiffany-verified targetAnalog-output reference for channel and load compatibility review.
Tiffany-verified targetCommunication-interface reference for protocol compatibility review.
Tiffany-verified targetMotion-control reference for axis and interface review.
Tiffany-verified targetUse IP20 as the controlled protection value in the X20 communication modules review. For x20 controller as bus slave, seat the module only in the approved X20 interface position. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.
Host is published as Compatible X20 CPU interface slot for the X20 communication modules. For legacy fieldbus integration, preserve shielding and bus termination at the segment boundary. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.
The official X20IF1063-1 record gives project identity as Address and telegram mapping retained for its x20 profibus dp slave interface module function. For machine-cell data exchange, restore the documented slave address and data mapping. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.
For this profibus dp slave connectivity selection, network role is Slave. For profibus retrofit, confirm cyclic exchange and diagnostic access from the master. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.
Use Status and data LEDs as the controlled indicators value in the X20 communication modules review. For x20 controller as bus slave, seat the module only in the approved X20 interface position. Release is appropriate only when the manufacturer value and the project requirement agree.
Hazardous-location listing is published as Class I, Division 2 documented for the X20 communication modules. For legacy fieldbus integration, preserve shielding and bus termination at the segment boundary. A substitution review must close functional, mechanical, electrical and environmental differences independently.
The official X20IF1063-1 record gives role as V0/V1 slave for its x20 profibus dp slave interface module function. For machine-cell data exchange, restore the documented slave address and data mapping. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.
For this profibus dp slave connectivity selection, fieldbus is PROFIBUS DP. For profibus retrofit, confirm cyclic exchange and diagnostic access from the master. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.
Use 1 as the controlled interfaces value in the X20 communication modules review. For x20 controller as bus slave, seat the module only in the approved X20 interface position. Mark the evidence source and revision so future reviewers can reproduce the decision.
B&R ID is published as 0xA717 for the X20 communication modules. For legacy fieldbus integration, preserve shielding and bus termination at the segment boundary. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
