other
Products
DS200SLCCG4AF Programmer and LAN Interface Card
DS200SLCCG4AF Programmer and LAN Interface Card
DS200SLCCG4AF Programmer and LAN Interface Card

General Electric DS200SLCCG4AF Programmer and LAN Interface Card

EMAIL SALES
General Electric official data reviewed
DS200SLCCG4AF — Programmer and LAN Interface Card

A G4 hardware-group programmer/LAN interface card with AF revision identity; undocumented protocol and pin details are intentionally excluded.

Legacy GE communication interface cardsProgramming-path and local-network interfacingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerGeneral Electric
Documented familyLegacy GE communication interface cards
Product formProgrammer and LAN Interface Card
Primary functionProgramming-path and local-network interfacing
Exact modelDS200SLCCG4AF
Base assemblyDS200SLCCG4A
Product designationProgrammer/LAN Interface Card
Hardware groupG4
  • Brand:

    General Electric
  • Item NO.:

    DS200SLCCG4AF
  • Goods Stock:

    1
  • Part Number:

    DS200SLCCG4AF
  • Description:

    A G4 hardware-group programmer/LAN interface card with AF revision identity; undocumented protocol and pin details are intentionally excluded.
DS200SLCCG4AF configuration inquiry

Get a precise quote for DS200SLCCG4AF

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

DS200SLCCG4AF official identification

A G4 hardware-group programmer/LAN interface card with AF revision identity; undocumented protocol and pin details are intentionally excluded.

System roleProgramming-path and local-network interfacing
Connection boundaryInternal control-rack connections defined by the installed system drawing
Selection focusMatch the full DS200SLCCG4AF code, rack position, connected cables, firmware context and project network record.
Release evidenceExact card label, rack drawing, cable schedule, revision record and communication test

Engineering and installation checks

  • undefined
  • Record cable positions and card-edge orientation before extraction.
  • Manufacturer verification basis: GE Vernova controls service and legacy-parts support record.
Official product data

DS200SLCCG4AF key specifications

Exact model DS200SLCCG4AF
Base assembly DS200SLCCG4A
Product designation Programmer/LAN Interface Card
Hardware group G4
Revision suffix AF
Manufacturer lineage Legacy General Electric controls
Connection basis Installed rack documentation
Protocol boundary No unpublished network protocol assumed
Rating boundary Use board label and system manual

Source: GE Vernova controls service and legacy-parts support record.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of DS200SLCCG4AF.

  • Record cable positions and card-edge orientation before extraction.
  • Keep the board under controlled ESD handling.
  • Restore the AF revision only where the installed record permits it.
  • Test programming access and the documented LAN path separately.
Record the as-found condition and the final exact card label, rack drawing, cable schedule, revision record and communication test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for DS200SLCCG4AF before purchase approval.

Card identity
DS200SLCCG4AF complete code
Host system
Rack and slot named in the site drawing
Cable set
Original connector map preserved
Revision control
G4 hardware with AF suffix
Network settings
Recovered from the controlled project archive
Final selection: Use only the values published for DS200SLCCG4AF in GE Vernova controls service and legacy-parts support record; site suitability remains an engineering decision.
Recommended model families

Related Industrial Models

Verified Industrial Models 016ED1052-1FB08-0BA26ES7521-7EH00-0AB06ES7414-3FM07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Verified Industrial Models 026ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Verified Industrial Models 03AI563AO568CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Verified Industrial Models 04CI541-DPCI542-DPCI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 016ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7517-3UP00-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7553-1AA00-0AB06ED1052-1MD08-0BA2CM5640-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04CM582-DPCM588-CNCM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05CM598-CNDC562DO526

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06DO572PM5032-R-ETHPM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07PM564-RP-ACATSA3S-0ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 0820F11NC104JA0NNNNN20F11RC015JA0NNNNN6ES7357-4AH01-0AE0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

DS200SLCCG4AF Order Guide

Use the complete General Electric designation and installed hardware record for engineering review.
1Ordering identityDS200SLCCG4AF
2Official evidenceGE Vernova controls service and legacy-parts support record
3Installation surveyKeep the board under controlled ESD handling.
4Compatibility gateDS200SLCCG4AF complete code
5Commissioning recordExact card label, rack drawing, cable schedule, revision record and communication test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
ABB / PROCESSOR MODULEPM564-RP-AC

Processor reference for controller compatibility and configuration review.

Tiffany-verified target
SIEMENS / DRIVE INTERFACE MODULE6ES7553-1AA00-0AB0

Drive-interface reference for motion-system compatibility review.

Tiffany-verified target
ABB / DIGITAL OUTPUT MODULEDO526

Digital-output reference for load and channel review.

Tiffany-verified target
ABB / PROFINET DEVICE MODULECM589-PNIO

PROFINET device reference for controller-network review.

Tiffany-verified target
ABB / PROFIBUS SLAVE MODULECM582-DP

PROFIBUS slave reference for host-network integration.

Tiffany-verified target
SIEMENS / RACK6ES7400-2JA10-0AA1

Rack reference for mechanical and module-placement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact DS200SLCCG4AF source record named on this page.
Interface reviewInternal control-rack connections defined by the installed system drawing
Receiving checkMatch the full DS200SLCCG4AF code, rack position, connected cables, firmware context and project network record.
Release packageExact card label, rack drawing, cable schedule, revision record and communication test

DS200SLCCG4AF FAQ

How should engineers verify hardware group before fitting DS200SLCCG4AF Programmer and LAN Interface Card?

Use G4 as the controlled hardware group value in the Legacy GE communication interface cards review. For legacy programming interface service, record cable positions and card-edge orientation before extraction. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

What installation decision is controlled by connection basis on DS200SLCCG4AF Programmer and LAN Interface Card?

Connection basis is published as Installed rack documentation for the Legacy GE communication interface cards. For control lan restoration, keep the board under controlled ESD handling. Log the comparison against the controlled parts list before the item enters the cabinet.

What commissioning check confirms the documented card identity for DS200SLCCG4AF Programmer and LAN Interface Card?

The official DS200SLCCG4AF record gives card identity as DS200SLCCG4AF complete code for its programmer and lan interface card function. For rack communication troubleshooting, restore the AF revision only where the installed record permits it. Check the mating device, protective hardware and configured function before energization.

At which review gate should DS200SLCCG4AF Programmer and LAN Interface Card revision control be challenged?

For this programming-path and local-network interfacing selection, revision control is G4 hardware with AF suffix. For revision-controlled spare matching, test programming access and the documented LAN path separately. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

Which drawing or schedule should carry the DS200SLCCG4AF Programmer and LAN Interface Card base assembly record?

Use DS200SLCCG4A as the controlled base assembly value in the Legacy GE communication interface cards review. For legacy programming interface service, record cable positions and card-edge orientation before extraction. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Which companion item must agree with revision suffix for DS200SLCCG4AF Programmer and LAN Interface Card?

Revision suffix is published as AF for the Legacy GE communication interface cards. For control lan restoration, keep the board under controlled ESD handling. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

How should a discrepancy in protocol boundary be closed for DS200SLCCG4AF Programmer and LAN Interface Card?

The official DS200SLCCG4AF record gives protocol boundary as No unpublished network protocol assumed for its programmer and lan interface card function. For rack communication troubleshooting, restore the AF revision only where the installed record permits it. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

What receiving evidence is required for the host system stated for DS200SLCCG4AF Programmer and LAN Interface Card?

For this programming-path and local-network interfacing selection, host system is Rack and slot named in the site drawing. For revision-controlled spare matching, test programming access and the documented LAN path separately. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

How is network settings separated from site-specific assumptions for DS200SLCCG4AF Programmer and LAN Interface Card?

Use Recovered from the controlled project archive as the controlled network settings value in the Legacy GE communication interface cards review. For legacy programming interface service, record cable positions and card-edge orientation before extraction. Release is appropriate only when the manufacturer value and the project requirement agree.

How should product designation be written in the purchase record for DS200SLCCG4AF Programmer and LAN Interface Card?

Product designation is published as Programmer/LAN Interface Card for the Legacy GE communication interface cards. For control lan restoration, keep the board under controlled ESD handling. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Legacy GE communication interface cards application review

DS200SLCCG4AF Applications

These contexts use the manufacturer-documented function of DS200SLCCG4AF; each requires a separate site-fit decision.

Application contexts

01 · Legacy programming interface serviceApply the documented programming-path and local-network interfacing only after confirming card identity as DS200SLCCG4AF complete code.
02 · Control LAN restorationApply the documented programming-path and local-network interfacing only after confirming host system as Rack and slot named in the site drawing.
03 · Rack communication troubleshootingApply the documented programming-path and local-network interfacing only after confirming cable set as Original connector map preserved.
04 · Revision-controlled spare matchingApply the documented programming-path and local-network interfacing only after confirming revision control as G4 hardware with AF suffix.

Why choose Nordwel

Traceable identityDS200SLCCG4AF remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to programming-path and local-network interfacing, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain DS200SLCCG4AF, Internal control-rack connections defined by the installed system drawing, and the approved site record as three independent checks.
Need help matching this General Electric configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp