other
Products
6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit
6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit
6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit

Siemens 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit

EMAIL SALES
Siemens official data reviewed
6SE7031-6EB87-2DA1 — 100 kW MASTERDRIVES Braking Unit

A manufacturer-documented braking unit with a 100 kW P20 rating, 150 kW P3 rating and 25 kW continuous braking value.

MASTERDRIVES braking unitsDC-link braking energy controlExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerSiemens
Documented familyMASTERDRIVES braking units
Product form100 kW MASTERDRIVES Braking Unit
Primary functionDC-link braking energy control
P20 braking power100 kW
P3 braking power150 kW
Continuous braking power25 kW
Assigned resistor6SE7031-6ES87-2DC0
  • Brand:

    SIEMENS
  • Item NO.:

    6SE7031-6EB87-2DA1
  • Goods Stock:

    1
  • Part Number:

    6SE7031-6EB87-2DA1
  • Description:

    A manufacturer-documented braking unit with a 100 kW P20 rating, 150 kW P3 rating and 25 kW continuous braking value.
6SE7031-6EB87-2DA1 configuration inquiry

Get a precise quote for 6SE7031-6EB87-2DA1

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6SE7031-6EB87-2DA1 official identification

A manufacturer-documented braking unit with a 100 kW P20 rating, 150 kW P3 rating and 25 kW continuous braking value.

System roleDC-link braking energy control
Connection boundaryBraking unit paired with the documented resistor and fuse set
Selection focusConfirm the full article, braking duty, resistor order, fuse selection and installation envelope.
Release evidenceExact article, braking calculation, resistor label, fuse record and controlled stop test

Engineering and installation checks

  • undefined
  • Prove the DC link is discharged before opening the braking circuit.
  • Manufacturer verification basis: Siemens operating guide for MASTERDRIVES braking units.
Official product data

6SE7031-6EB87-2DA1 key specifications

P20 braking power 100 kW
P3 braking power 150 kW
Continuous braking power 25 kW
Assigned resistor 6SE7031-6ES87-2DC0
Resistor value 4 ohm
Resistor dimensions 605 × 740 × 485 mm
Required fuse 3NE3225; two pieces
Response threshold basis 774 VDC factory setting

Source: Siemens operating guide for MASTERDRIVES braking units.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of 6SE7031-6EB87-2DA1.

  • Prove the DC link is discharged before opening the braking circuit.
  • Install the documented resistor where heat can be safely rejected.
  • Fit both specified fuses and verify their coordination.
  • Increase stopping energy gradually while monitoring the resistor circuit.
Record the as-found condition and the final exact article, braking calculation, resistor label, fuse record and controlled stop test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for 6SE7031-6EB87-2DA1 before purchase approval.

Braking duty
Within the published P20, P3 and continuous values
Resistor
6SE7031-6ES87-2DC0
Protection
Two 3NE3225 fuses
Control basis
Application designed for the documented DC response threshold
Mechanical allowance
Space and cooling for the assigned resistor
Final selection: Use only the values published for 6SE7031-6EB87-2DA1 in Siemens operating guide for MASTERDRIVES braking units; site suitability remains an engineering decision.
Recommended model families

More Siemens models

Siemens verified models 016ES7414-3FM07-0AB06ES7416-3FS07-0AB06ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 026ES7654-7HC00-0XA06ES7357-4AH01-0AE06ES7400-2JA10-0AA1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 036ES7414-2XG02-0AB06ES7416-2XL01-0AB06ES7425-2AD00-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 046ES7515-2AN03-0AB06ES7517-3UP00-0AB06ES7518-4UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 0120F11NC104JA0NNNNN20F11RC015JA0NNNNN6ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 026ES7553-1AA00-0AB06ED1052-1MD08-0BA26ED1052-1FB08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 036ES7521-7EH00-0AB0AI563AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04CD522CI541-DPCI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05CI592-CS31CM5640-2ETHCM582-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06CM588-CNCM589-PNIOCM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07DC562DO526DO572

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08PM5032-R-ETHPM5072-T-2ETHPM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

6SE7031-6EB87-2DA1 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Ordering identity6SE7031-6EB87-2DA1
2Official evidenceSiemens operating guide for MASTERDRIVES braking units
3Installation surveyInstall the documented resistor where heat can be safely rejected.
4Compatibility gateWithin the published P20, P3 and continuous values
5Commissioning recordExact article, braking calculation, resistor label, fuse record and controlled stop test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SIEMENS / RACK6ES7400-2JA10-0AA1

Rack reference for mechanical and module-placement review.

Tiffany-verified target
SIEMENS / DRIVE INTERFACE MODULE6ES7553-1AA00-0AB0

Drive-interface reference for motion-system compatibility review.

Tiffany-verified target
SIEMENS / EXACT MODEL REFERENCE6ES7425-2AD00-0AA0

Exact-model reference for ordering-code verification.

Tiffany-verified target
ABB / COMMUNICATION INTERFACECI542-DP

Communication-interface reference for protocol compatibility review.

Tiffany-verified target
YOKOGAWA / ANALOG OUTPUT MODULEATSS3D-0

Analog-output reference for channel and load compatibility review.

Tiffany-verified target
YOKOGAWA / ANALOG INPUT TERMINALATSA3S-0

Analog-input terminal reference for field-wiring review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact 6SE7031-6EB87-2DA1 source record named on this page.
Interface reviewBraking unit paired with the documented resistor and fuse set
Receiving checkConfirm the full article, braking duty, resistor order, fuse selection and installation envelope.
Release packageExact article, braking calculation, resistor label, fuse record and controlled stop test

6SE7031-6EB87-2DA1 FAQ

What fault could result from misreading resistor on 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit?

For this dc-link braking energy control selection, resistor is 6SE7031-6ES87-2DC0. For high-inertia drive stopping, prove the DC link is discharged before opening the braking circuit. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

What photograph or measurement proves mechanical allowance on received 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit?

Use Space and cooling for the assigned resistor as the controlled mechanical allowance value in the MASTERDRIVES braking units review. For cyclic deceleration duty, install the documented resistor where heat can be safely rejected. Release is appropriate only when the manufacturer value and the project requirement agree.

Which continuous braking power value identifies the reviewed 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit configuration?

Continuous braking power is published as 25 kW for the MASTERDRIVES braking units. For drive-system braking retrofit, fit both specified fuses and verify their coordination. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Why does resistor dimensions matter when selecting 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit?

The official 6SE7031-6EB87-2DA1 record gives resistor dimensions as 605 × 740 × 485 mm for its 100 kw masterdrives braking unit function. For dynamic braking circuit service, increase stopping energy gradually while monitoring the resistor circuit. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.

Which mismatch involving braking duty should stop approval of 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit?

For this dc-link braking energy control selection, braking duty is Within the published P20, P3 and continuous values. For high-inertia drive stopping, prove the DC link is discharged before opening the braking circuit. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.

What maintenance record preserves the control basis evidence for 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit?

Use Application designed for the documented DC response threshold as the controlled control basis value in the MASTERDRIVES braking units review. For cyclic deceleration duty, install the documented resistor where heat can be safely rejected. Mark the evidence source and revision so future reviewers can reproduce the decision.

How does p3 braking power limit a proposed 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit substitute?

P3 braking power is published as 150 kW for the MASTERDRIVES braking units. For drive-system braking retrofit, fit both specified fuses and verify their coordination. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.

How can a technician test 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit without exceeding the stated resistor value?

The official 6SE7031-6EB87-2DA1 record gives resistor value as 4 ohm for its 100 kw masterdrives braking unit function. For dynamic braking circuit service, increase stopping energy gradually while monitoring the resistor circuit. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.

When can the 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit response threshold basis entry be released for quotation?

For this dc-link braking energy control selection, response threshold basis is 774 VDC factory setting. For high-inertia drive stopping, prove the DC link is discharged before opening the braking circuit. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.

How should engineers verify protection before fitting 6SE7031-6EB87-2DA1 100 kW MASTERDRIVES Braking Unit?

Use Two 3NE3225 fuses as the controlled protection value in the MASTERDRIVES braking units review. For cyclic deceleration duty, install the documented resistor where heat can be safely rejected. The commissioning sheet should name the instrument, method, acceptance limit and approving person.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
MASTERDRIVES braking units application review

6SE7031-6EB87-2DA1 Applications

These contexts use the manufacturer-documented function of 6SE7031-6EB87-2DA1; each requires a separate site-fit decision.

Application contexts

01 · High-inertia drive stoppingApply the documented dc-link braking energy control only after confirming braking duty as Within the published P20, P3 and continuous values.
02 · Cyclic deceleration dutyApply the documented dc-link braking energy control only after confirming resistor as 6SE7031-6ES87-2DC0.
03 · Drive-system braking retrofitApply the documented dc-link braking energy control only after confirming protection as Two 3NE3225 fuses.
04 · Dynamic braking circuit serviceApply the documented dc-link braking energy control only after confirming control basis as Application designed for the documented DC response threshold.

Why choose Nordwel

Traceable identity6SE7031-6EB87-2DA1 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to dc-link braking energy control, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain 6SE7031-6EB87-2DA1, Braking unit paired with the documented resistor and fuse set, and the approved site record as three independent checks.
Need help matching this Siemens configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp