A compact S7-200 SMART communication signal board with one RS485 port on a 9-pole D-sub connector and Freeport support.
Brand:
SIEMENSItem NO.:
6ES7288-5CM01-0AA0Part Number:
6ES7288-5CM01-0AA0Weight:
18.2 gDimensions:
35 × 52.2 × 16 mmCertification:
CE; IP20Description:
A compact S7-200 SMART communication signal board with one RS485 port on a 9-pole D-sub connector and Freeport support.Siemens identifies 6ES7288-5CM01-0AA0 as SB CM01 communication signal board. A compact S7-200 SMART communication signal board with one RS485 port on a 9-pole D-sub connector and Freeport support.
Verified SIMATIC S7-200 SMART analog-input and temperature-measurement options.
Verified analog, signal-board and compact I/O choices for S7-200 SMART systems.
Published communication and digital signal-board options with verified contact details.
Expandable S7-200 SMART CPU hosts and compatible compact control choices.
Verified Siemens analog-input, analog-output and temperature-measurement modules.
Verified S7-200 SMART CPUs, communication boards and compact digital I/O.
Published 8 mm and NSv proximity probe configurations.
Verified 5 mm, 11 mm, 25 mm, 50 mm and ceramic-capped probe options.
Verified probe housings, mounting studs and system cable accessories.
Published velocity, thrust, speed and vibration-sensing products.
Verified protection relays, controllers and machinery-monitoring products.
Additional verified automation, monitoring and I/O products published on Nordwel.
Use the exact manufacturer order number and verify the system constraints before procurement.
Specify 6ES7288-5CM01-0AA0 / SB CM01 on the quotation.
Check that the selected S7-200 SMART CPU supports this signal board.
Document Freeport, Modbus RTU or other supported serial requirements in the project.
Plan a 9-pole D-sub RS485 connection and correct pin assignment.
Keep the shielded serial cable within the documented 10 m maximum.
Plan configuration changes with the knowledge that reparameterization in RUN is not supported.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquirySIMATIC S7-200 SMART RS485 communication board.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Siemens official product documentation for this exact order number.
It is the S7-200 SMART SB CM01 communication signal board with one RS485 port.
The exact data sheet lists a 9-pole D-sub pin connector.
Yes. Freeport is explicitly supported.
No. The exact board has no Ethernet, PROFINET, PROFIBUS or TCP/IP interface.
Siemens lists a maximum length of 10 m.
No. Reparameterization in RUN is not supported for this module.
It draws approximately 50 mA from the 5 V backplane and the listed power is 0.5 W.
SB CM01 measures 35 × 52.2 × 16 mm and weighs about 18.2 g.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Use the verified electrical, lifecycle and system limits—not generic family assumptions—to decide suitability.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
