A narrow-side-view probe configured as 330910 with M10×1, stainless-steel armor, 0 mm unthreaded length, 60 mm case length and 7.0 m total lead.
Brand:
Bently NevadaItem NO.:
330910-00-06-70-02-0Goods Stock:
1Part Number:
330910-00-06-70-02-05Weight:
See exact manufacturer shipment dataDimensions:
60 mm case; 7.0 m leadCertification:
05 — multiple approvalsDescription:
A narrow-side-view probe configured as 330910 with M10×1, stainless-steel armor, 0 mm unthreaded length, 60 mm case length and 7.0 m total lead.Bently Nevada identifies 330910-00-06-70-02-05 as 3300 XL NSv proximity probe. A narrow-side-view probe configured as 330910 with M10×1, stainless-steel armor, 0 mm unthreaded length, 60 mm case length and 7.0 m total lead.
Published 8 mm and NSv proximity probe options with verified sales contact details.
Published 5 mm, 11 mm, 25 mm and 50 mm proximity sensing options.
Verified probe housings, mounting hardware and cable accessories.
Verified vibration, thrust, speed and machinery-monitoring products.
Verified Siemens analog-input, analog-output and temperature-measurement modules.
Verified S7-200 SMART CPUs, communication boards and compact digital I/O.
Published 8 mm and NSv proximity probe configurations.
Verified 5 mm, 11 mm, 25 mm, 50 mm and ceramic-capped probe options.
Verified probe housings, mounting studs and system cable accessories.
Published velocity, thrust, speed and vibration-sensing products.
Verified protection relays, controllers and machinery-monitoring products.
Additional verified automation, monitoring and I/O products published on Nordwel.
Use the exact manufacturer order number and verify the system constraints before procurement.
Quote 330910-00-06-70-02-05 exactly, including leading zeros, country suffixes and any MOD reference.
Confirm whether the order is for a probe, cable, sensor, transmitter, housing, accessory or control module.
Check thread, connector, mounting, cable length, power and field wiring against the installed drawings.
Do not mix unmatched transducer-system lengths, families, calibrations or host platforms.
Confirm the destination hazardous-area and country approval requirement from the current manufacturer record.
Provide a clear nameplate photograph and the equipment drawing with the commercial inquiry.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquirySIMATIC S7-200 SMART RS485 communication board.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Bently Nevada official product documentation for this exact order number.
330910, M10×1, stainless-steel armor, 0 mm unthreaded length, 60 mm overall case, 7.0 m lead, ClickLoc standard cable and 05 — multiple approvals.
The narrow-side-view family is intended for restricted counterbores and smaller shafts or axial targets where standard probe geometry may not fit.
Baker Hughes documents a 1.5 mm linear range for the matched NSv system.
The manufacturer recommends a 1.0 mm gap for the complete standard NSv system.
No. It specifies the ClickLoc connector with standard cable but without the protector.
No. The NSv target geometry, matched sensor, total system length and monitor setup all require verification.
05 — multiple approvals
Its ordering structure and system limits are defined in Baker Hughes 3300 XL NSv data sheet 147385.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Use the verified electrical, lifecycle and system limits—not generic family assumptions—to decide suitability.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
