A sixteen-channel 24 V DC input expansion module for S7-200 SMART systems, arranged as four isolated groups in a 45 mm housing.
Brand:
SIEMENSItem NO.:
6ES7288-2DE16-0AA0Part Number:
6ES7288-2DE16-0AA0Weight:
176 gDimensions:
45 × 100 × 81 mmCertification:
CE; IP20Description:
A sixteen-channel 24 V DC input expansion module for S7-200 SMART systems, arranged as four isolated groups in a 45 mm housing.Siemens identifies 6ES7288-2DE16-0AA0 as the SIMATIC S7-200 SMART EM DE16 / DI 16 × 24 V DC. A sixteen-channel 24 V DC input expansion module for S7-200 SMART systems, arranged as four isolated groups in a 45 mm housing.
Published digital and analog input modules for adding field signals.
Sourcing MOSFET options for fast 24 V DC output expansion.
Dry-contact relay options for documented AC and DC field loads.
Published standard S7-200 SMART CPUs that support expansion-module architectures.
Selected ABB control, I/O and measurement products already published on Nordwel.
Selected Honeywell controller, IOTA and Safety Manager products published on Nordwel.
Selected GE turbine-control, communication and I/O products published on Nordwel.
Square D belongs to Schneider Electric; these linked Schneider products are already published on Nordwel.
Selected Bently Nevada 330904 NSv proximity probes with verified Nordwel contact details.
Selected Vibro-Meter proximity and vibration sensor products published on Nordwel.
Selected Bently Nevada 330904 and 330905 NSv proximity probes with verified Nordwel contact details.
Selected Bently Nevada 330905, 330910 and 3500 system products with verified Nordwel contact details.
Use the exact Siemens order number and verify the system constraints before procurement.
Allocate sixteen consecutive DI addresses in the CPU hardware configuration.
Divide field circuits across the four documented isolation groups.
Validate that every sensor delivers +15 to +30 V for logic 1 and below 5 V for logic 0.
Include the module’s maximum 105 mA backplane requirement in the CPU expansion budget.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquirySIMATIC S7-200 SMART RS485 communication board.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Siemens official product documentation for this exact order number.
The module provides sixteen digital inputs and no outputs.
The nominal signal is 24 V DC, with a permitted CPU-side supply range of 20.4 to 28.8 V DC.
Logic 1 is +15 to +30 V; logic 0 is below 5 V DC.
Siemens specifies a maximum 200 µs delay for both 0-to-1 and 1-to-0 transitions.
The sixteen channels are split into four groups.
The exact data sheet lists 85 mA typical and 105 mA maximum from the 5 V backplane bus.
Yes. Siemens lists sixteen simultaneously controllable inputs in the specified mounting conditions.
No. It requires an S7-200 SMART CPU with an expansion-module interface.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Use the verified electrical and system limits—not generic family assumptions—to decide suitability.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :