A 24 VDC CPU with 100 KB SRAM, 256 KB FlashPROM, one RS232 port and one isolated network-capable CAN interface.
Brand:
OthersItem NO.:
7CP430.60-1Goods Stock:
1Part Number:
7CP430.60-1Description:
A 24 VDC CPU with 100 KB SRAM, 256 KB FlashPROM, one RS232 port and one isolated network-capable CAN interface.A 24 VDC CPU with 100 KB SRAM, 256 KB FlashPROM, one RS232 port and one isolated network-capable CAN interface.
| Supply | 24 VDC |
|---|---|
| Power consumption | 7 W |
| SRAM | 100 KB |
| FlashPROM | 256 KB |
| RS232 interfaces | 1 |
| CAN interfaces | 1, isolated |
| Maximum digital I/O | 64 points |
| Maximum analog I/O | 32 points |
Source: B&R 7CP430.60-1 official product record and data sheet.
Review the physical, electrical and environmental conditions that control installation of 7CP430.60-1.
Close each documented selection boundary for 7CP430.60-1 before purchase approval.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Thermocouple-input reference for signal-range and wiring review.
Tiffany-verified targetAnalog-output reference for channel and load compatibility review.
Tiffany-verified targetLogic-module reference for control-function compatibility review.
Tiffany-verified targetProcessor reference for controller compatibility and configuration review.
Tiffany-verified targetDrive-interface reference for motion-system compatibility review.
Tiffany-verified targetRack reference for mechanical and module-placement review.
Tiffany-verified targetUse 7 W as the controlled power consumption value in the 2003 controller CPUs review. For compact machine controller, back up the running application before removing the CPU. Mark the evidence source and revision so future reviewers can reproduce the decision.
RS232 interfaces is published as 1 for the 2003 controller CPUs. For can-connected equipment, measure the 24 V supply under representative load. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.
The official 7CP430.60-1 record gives maximum analog i/o as 32 points for its 2003 system cpu function. For serial device coordination, record CAN node settings and physical termination. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.
For this compact machine sequence control selection, serial link is One RS232 interface. For legacy 2003-system service, test every assigned I/O point after restoration. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.
Use 24 VDC as the controlled supply value in the 2003 controller CPUs review. For compact machine controller, back up the running application before removing the CPU. The commissioning sheet should name the instrument, method, acceptance limit and approving person.
FlashPROM is published as 256 KB for the 2003 controller CPUs. For can-connected equipment, measure the 24 V supply under representative load. Use the value as a selection boundary, not as a prediction of site performance.
The official 7CP430.60-1 record gives maximum digital i/o as 64 points for its 2003 system cpu function. For serial device coordination, record CAN node settings and physical termination. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.
For this compact machine sequence control selection, program resources is 100 KB SRAM and 256 KB FlashPROM. For legacy 2003-system service, test every assigned I/O point after restoration. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.
Use Up to 64 digital and 32 analog I/O points as the controlled expansion scale value in the 2003 controller CPUs review. For compact machine controller, back up the running application before removing the CPU. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.
SRAM is published as 100 KB for the 2003 controller CPUs. For can-connected equipment, measure the 24 V supply under representative load. Log the comparison against the controlled parts list before the item enters the cabinet.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
