other
Products
6GK5124-0BA00-2AA3 SCALANCE X124 Unmanaged Ethernet Switch
6GK5124-0BA00-2AA3 SCALANCE X124 Unmanaged Ethernet Switch
6GK5124-0BA00-2AA3 SCALANCE X124 Unmanaged Ethernet Switch

Siemens 6GK5124-0BA00-2AA3 SCALANCE X124 Unmanaged Ethernet Switch

EMAIL SALES
Siemens official data reviewed
6GK5124-0BA00-2AA3 — SCALANCE X124 Unmanaged Ethernet Switch

A 24-port unmanaged industrial Ethernet switch for dense copper connections, redundant power input and DIN-rail, profile-rail or wall mounting.

SCALANCE X-100 unmanaged switchesHigh-density 24-port copper Ethernet distributionExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familySCALANCE X-100 unmanaged switches
Exact model6GK5124-0BA00-2AA3
Verified functionHigh-density 24-port copper Ethernet distribution
Interface boundaryTwenty-four 10/100 Mbit/s RJ45 ports with redundant 24 VDC supply
MAC address table2048 entries
Selection basisConfirm 24-port requirement, cabinet width, 24 VDC supply, unmanaged operation and IP30 environment.
  • Brand:

    SIEMENS
  • Item NO.:

    6GK5124-0BA00-2AA3
  • Goods Stock:

    1
  • Part Number:

    6GK5124-0BA00-2AA3
  • Description:

    A 24-port unmanaged industrial Ethernet switch for dense copper connections, redundant power input and DIN-rail, profile-rail or wall mounting.
6GK5124-0BA00-2AA3 configuration inquiry

Get a precise quote for 6GK5124-0BA00-2AA3

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6GK5124-0BA00-2AA3 official identification

A 24-port unmanaged industrial Ethernet switch for dense copper connections, redundant power input and DIN-rail, profile-rail or wall mounting.

System responsibilityHigh-density 24-port copper Ethernet distribution
Connection envelopeTwenty-four 10/100 Mbit/s RJ45 ports with redundant 24 VDC supply
Procurement decisionConfirm 24-port requirement, cabinet width, 24 VDC supply, unmanaged operation and IP30 environment.
Acceptance recordTwenty-four-port schedule, supply-path test, fault-contact check and complete link scan

Engineering and installation checks

  • The controlling identity is 6GK5124-0BA00-2AA3; every character remains part of the order reference.
  • Reserve the full 180 mm cabinet width plus connector bend space.
  • Published facts are limited to Siemens SCALANCE X-100 operating instructions.
Official product data

6GK5124-0BA00-2AA3 key specifications

RJ45 ports 24
Port speed 10/100 Mbit/s
Management Unmanaged
Nominal supply 24 VDC
Supply range 18–32 VDC
Typical current 200 mA
Typical power loss 4.80 W
Protection IP30
Operating temperature −20 to +70 °C
Dimensions 180 × 125 × 124 mm
Net weight 1.5 kg
MAC address table 2048 entries

Source: Siemens SCALANCE X-100 operating instructions.

Pre-order check 01

Installation environment

Prepare the scalance x124 unmanaged ethernet switch by recording the installed connections, settings and complete nameplate.

  • Reserve the full 180 mm cabinet width plus connector bend space.
  • Document all 24 copper links before moving the installed wiring.
  • Wire both supply inputs and the 24 VDC signalling contact as shown in the approved panel design.
  • Verify link indication and traffic path for every occupied port.
Close the work with twenty-four-port schedule, supply-path test, fault-contact check and complete link scan.
Pre-order check 02

Compatibility confirmation

Approve 6GK5124-0BA00-2AA3 only when its documented function and every listed boundary agree with the installed design.

Port density
24 copper links
Network speed
10/100 Mbit/s
Operation mode
Unmanaged
Power input
18–32 VDC
Enclosure requirement
IP30 installation environment
Final selection: Use only the values published for 6GK5124-0BA00-2AA3 in Siemens SCALANCE X-100 operating instructions; site suitability remains an engineering decision.
Recommended model families

More Siemens models

Siemens verified models 01Siemens 6ES7425-2AD00-0AA0Siemens 6ES7515-2AN03-0AB0Siemens 6ES7517-3UP00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 02Siemens 6ES7518-4UP00-0AB0Siemens 6GK1161-6AA02Siemens 6SL3120-1TE15-0AA4

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 03Siemens 6SL3040-0LA00-0AA1Siemens 6ES7157-0AA82-0XA0Siemens 6ES7407-0RA01-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 04Siemens 6ES5305-7LA11Siemens 6ES7551-1AB00-0AB0Siemens 6ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Siemens 6ES7416-2XL01-0AB0B&R 8BVI0330HWS0.000-1B&R X20IF2181-2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02B&R 8B0C0320HW00.000-1B&R 8BVI0220HWD0.000-1B&R X20AP3111

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03B&R X20CSL8100Siemens 6ED1052-1MD08-0BA2Siemens 6ES7521-7EH00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Siemens 6ES7414-3FM07-0AB0Siemens 6ES7416-3FS07-0AB0Siemens 6ES7654-7HB00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Siemens 6ES7654-7HC00-0XA0ABB AI563ABB AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB CD522ABB CI541-DPABB CI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ABB CI592-CS31ABB CM5640-2ETHABB CM582-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08ABB CM588-CNABB CM589-PNIOABB CM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

6GK5124-0BA00-2AA3 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Ordering identity6GK5124-0BA00-2AA3
2Manufacturer evidenceSiemens SCALANCE X-100 operating instructions
3Installed-condition captureDocument all 24 copper links before moving the installed wiring.
4Compatibility gatePort density: 24 copper links
5Commissioning proofTwenty-four-port schedule, supply-path test, fault-contact check and complete link scan
6Release decisionConfirm 24-port requirement, cabinet width, 24 VDC supply, unmanaged operation and IP30 environment.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of 6GK5124-0BA00-2AA3.

Support scope

RJ45 ports evidence24 is checked against the received unit.
Network speed review10/100 Mbit/s
Management checkpointUnmanaged
Acceptance packageTwenty-four-port schedule, supply-path test, fault-contact check and complete link scan

6GK5124-0BA00-2AA3 FAQ

How much cabinet width should be reserved for 6GK5124-0BA00-2AA3?

The published width is 180 mm, with a 180 x 125 x 124 mm device envelope. Add the required RJ45 bend radius and service clearance to the mechanical plan.

What network capacity is fixed by this exact article?

It provides twenty-four 10/100 Mbit/s RJ45 ports in an unmanaged switch. The MAC address table is listed as 2048 entries.

Which input-voltage window must the panel supply maintain?

The nominal supply is 24 VDC and the stated range is 18-32 VDC. Verify voltage at the switch terminals under load and during transfer between redundant feeds.

Why should every occupied port be documented before removal?

With twenty-four similar connectors, an unrecorded move can change topology without an obvious wiring error. Capture port numbers, cable labels and endpoint identities before disconnection.

Is a managed replacement equivalent for this application?

Not automatically. This model operates unmanaged, so any managed substitute must be reviewed for default behavior, commissioning controls and approved network design.

What environmental boundary follows from the IP30 rating?

Install the unit inside a suitable enclosure protected from conductive contamination and direct moisture. The published operating range is -20 to +70 °C.

How much heat should the enclosure calculation allocate to the switch?

Use the published typical power loss of 4.80 W as the documented reference, then evaluate the complete panel load. The listed typical current is 200 mA.

What alarm circuit should be preserved during exchange?

The approved installation includes redundant 24 VDC inputs and a signalling contact. Restore the fault contact wiring and prove that the supervisory alarm changes state as designed.

What is an adequate acceptance test for all twenty-four links?

Check link indication and traffic path on every occupied RJ45 port, not only a sample. Record unused ports separately so an untested open connector is not reported as a failure.

How is the exact high-density version confirmed at receiving?

Match 6GK5124-0BA00-2AA3 on the nameplate, count the twenty-four RJ45 positions and inspect supply and alarm terminals. Retain one overview and one legible label photograph.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
SCALANCE X-100 unmanaged switches application review

6GK5124-0BA00-2AA3 Applications

These contexts use 6GK5124-0BA00-2AA3 for high-density 24-port copper ethernet distribution; each requires its own installed-system evidence.

Application contexts

01 · Dense control-cabinet networkApply the documented high-density 24-port copper ethernet distribution only after confirming port density as 24 copper links.
02 · Machine-line copper distributionApply the documented high-density 24-port copper ethernet distribution only after confirming network speed as 10/100 Mbit/s.
03 · Legacy 24-port switch spareApply the documented high-density 24-port copper ethernet distribution only after confirming operation mode as Unmanaged.
04 · Unmanaged plant access layerApply the documented high-density 24-port copper ethernet distribution only after confirming power input as 18–32 VDC.

Why choose Nordwel

RJ45 ports traceability6GK5124-0BA00-2AA3 is reviewed against 24.
Port speed boundary10/100 Mbit/s is checked independently.
Operation mode controlUnmanaged
Coordinated releaseTiffany manages evidence, quotation and twenty-four-port schedule, supply-path test, fault-contact check and complete link scan.
Keep port density, power input and final acceptance as separate decisions.
Need Tiffany to verify the 6GK5124-0BA00-2AA3 evidence package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp