other
Products
7MH4553-1AA41 SIWAREX M Weighing Module
7MH4553-1AA41 SIWAREX M Weighing Module
7MH4553-1AA41 SIWAREX M Weighing Module

Siemens 7MH4553-1AA41 SIWAREX M Weighing Module

EMAIL SALES
Siemens official data reviewed
7MH4553-1AA41 — SIWAREX M Weighing Module

A documented weighing module with a 24 V supply, three digital inputs, four digital outputs, one analog output and two serial interfaces.

SIWAREX M weighing electronicsLoad-cell measurement and weighing controlExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
ManufacturerSiemens
Documented familySIWAREX M weighing electronics
Product formSIWAREX M Weighing Module
Primary functionLoad-cell measurement and weighing control
Supply24 VDC
Digital inputs3
Digital outputs4
Analog outputs1
  • Brand:

    SIEMENS
  • Item NO.:

    7MH4553-1AA41
  • Goods Stock:

    1
  • Part Number:

    7MH4553-1AA41
  • Description:

    A documented weighing module with a 24 V supply, three digital inputs, four digital outputs, one analog output and two serial interfaces.
7MH4553-1AA41 configuration inquiry

Get a precise quote for 7MH4553-1AA41

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

7MH4553-1AA41 official identification

A documented weighing module with a 24 V supply, three digital inputs, four digital outputs, one analog output and two serial interfaces.

System roleLoad-cell measurement and weighing control
Connection boundaryLoad-cell input with local digital and analog process connections
Selection focusConfirm the exact article, load-cell circuit, field connections, calibration state and legal-for-trade requirements.
Release evidenceModule label, load-cell record, parameter backup, seal status and traceable weight test

Engineering and installation checks

  • undefined
  • Record calibration and seal condition before removing the module.
  • Manufacturer verification basis: Siemens SIWAREX M Equipment Manual.
Official product data

7MH4553-1AA41 key specifications

Supply 24 VDC
Digital inputs 3
Digital outputs 4
Analog outputs 1
Serial interfaces TTY and RS232C
Sensor connection Load-cell signal, sense and excitation terminals
Adjustment indication Front status indication provided
Exact article 7MH4553-1AA41

Source: Siemens SIWAREX M Equipment Manual.

Pre-order check 01

Installation environment

Review the physical, electrical and environmental conditions that control installation of 7MH4553-1AA41.

  • Record calibration and seal condition before removing the module.
  • Keep load-cell excitation and signal conductors correctly paired.
  • Restore input and output assignments from the controlled parameter record.
  • Complete zero, span and representative-load tests before release.
Record the as-found condition and the final module label, load-cell record, parameter backup, seal status and traceable weight test
Pre-order check 02

Compatibility confirmation

Close each documented selection boundary for 7MH4553-1AA41 before purchase approval.

Sensor circuit
Installed load cells and junction box
Power
24 VDC
Field functions
Three inputs, four outputs and one analog output
Host communication
Required TTY or RS232C connection documented
Verification
Application calibration and seal requirements retained
Final selection: Use only the values published for 7MH4553-1AA41 in Siemens SIWAREX M Equipment Manual; site suitability remains an engineering decision.
Recommended model families

More Siemens models

Siemens verified models 016ES7416-3FS07-0AB06ES7654-7HB00-0XA06ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 026ES7357-4AH01-0AE06ES7400-2JA10-0AA16ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 036ES7416-2XL01-0AB06ES7425-2AD00-0AA06ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 046ES7517-3UP00-0AB06ES7518-4UP00-0AB06ES7551-1AB00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01AI563AO568CD522

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02CI541-DPCI542-DPCI592-CS31

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03CM5640-2ETHCM582-DPCM588-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04CM589-PNIOCM598-CNDC562

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05DO526DO572PM5032-R-ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06PM5072-T-2ETHPM564-RP-ACATSA3S-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07ATSS3D-020F11NC104JA0NNNNN20F11RC015JA0NNNNN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 086ES7553-1AA00-0AB06ED1052-1MD08-0BA26ED1052-1FB08-0BA2

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

7MH4553-1AA41 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Ordering identity7MH4553-1AA41
2Official evidenceSiemens SIWAREX M Equipment Manual
3Installation surveyKeep load-cell excitation and signal conductors correctly paired.
4Compatibility gateInstalled load cells and junction box
5Commissioning recordModule label, load-cell record, parameter backup, seal status and traceable weight test
6Substitution limitundefined

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
ABB / PROFINET DEVICE MODULECM589-PNIO

PROFINET device reference for controller-network review.

Tiffany-verified target
SIEMENS / PROCESSOR MODULE6ES7515-2AN03-0AB0

Processor reference for controller compatibility and configuration review.

Tiffany-verified target
SIEMENS / LOGIC MODULE6ED1052-1MD08-0BA2

Logic-module reference for control-function compatibility review.

Tiffany-verified target
SIEMENS / DIGITAL INPUT MODULE6ES7521-7EH00-0AB0

Digital-input reference for signal and channel review.

Tiffany-verified target
ABB / ETHERNET EXTENSION MODULECM5640-2ETH

Ethernet-extension reference for network architecture review.

Tiffany-verified target
ABB / CANOPEN SLAVE MODULECM588-CN

CANopen slave reference for device-network integration.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Configuration-aware support for quotation, replacement review and shipment coordination.

Support scope

Document controlUse the exact 7MH4553-1AA41 source record named on this page.
Interface reviewLoad-cell input with local digital and analog process connections
Receiving checkConfirm the exact article, load-cell circuit, field connections, calibration state and legal-for-trade requirements.
Release packageModule label, load-cell record, parameter backup, seal status and traceable weight test

7MH4553-1AA41 FAQ

How should engineers verify field functions before fitting 7MH4553-1AA41 SIWAREX M Weighing Module?

Use Three inputs, four outputs and one analog output as the controlled field functions value in the SIWAREX M weighing electronics review. For industrial scale control, record calibration and seal condition before removing the module. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.

What installation decision is controlled by supply on 7MH4553-1AA41 SIWAREX M Weighing Module?

Supply is published as 24 VDC for the SIWAREX M weighing electronics. For batch weighing, keep load-cell excitation and signal conductors correctly paired. Log the comparison against the controlled parts list before the item enters the cabinet.

What commissioning check confirms the documented analog outputs for 7MH4553-1AA41 SIWAREX M Weighing Module?

The official 7MH4553-1AA41 record gives analog outputs as 1 for its siwarex m weighing module function. For load-cell signal processing, restore input and output assignments from the controlled parameter record. Check the mating device, protective hardware and configured function before energization.

At which review gate should 7MH4553-1AA41 SIWAREX M Weighing Module adjustment indication be challenged?

For this load-cell measurement and weighing control selection, adjustment indication is Front status indication provided. For verified weighing-system maintenance, complete zero, span and representative-load tests before release. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.

Which drawing or schedule should carry the 7MH4553-1AA41 SIWAREX M Weighing Module power record?

Use 24 VDC as the controlled power value in the SIWAREX M weighing electronics review. For industrial scale control, record calibration and seal condition before removing the module. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.

Which companion item must agree with verification for 7MH4553-1AA41 SIWAREX M Weighing Module?

Verification is published as Application calibration and seal requirements retained for the SIWAREX M weighing electronics. For batch weighing, keep load-cell excitation and signal conductors correctly paired. Record the complete marking in focus; cropped labels are not sufficient for exact-order approval.

How should a discrepancy in digital outputs be closed for 7MH4553-1AA41 SIWAREX M Weighing Module?

The official 7MH4553-1AA41 record gives digital outputs as 4 for its siwarex m weighing module function. For load-cell signal processing, restore input and output assignments from the controlled parameter record. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.

What receiving evidence is required for the sensor connection stated for 7MH4553-1AA41 SIWAREX M Weighing Module?

For this load-cell measurement and weighing control selection, sensor connection is Load-cell signal, sense and excitation terminals. For verified weighing-system maintenance, complete zero, span and representative-load tests before release. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.

How is sensor circuit separated from site-specific assumptions for 7MH4553-1AA41 SIWAREX M Weighing Module?

Use Installed load cells and junction box as the controlled sensor circuit value in the SIWAREX M weighing electronics review. For industrial scale control, record calibration and seal condition before removing the module. Release is appropriate only when the manufacturer value and the project requirement agree.

How should host communication be written in the purchase record for 7MH4553-1AA41 SIWAREX M Weighing Module?

Host communication is published as Required TTY or RS232C connection documented for the SIWAREX M weighing electronics. For batch weighing, keep load-cell excitation and signal conductors correctly paired. A substitution review must close functional, mechanical, electrical and environmental differences independently.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
SIWAREX M weighing electronics application review

7MH4553-1AA41 Applications

These contexts use the manufacturer-documented function of 7MH4553-1AA41; each requires a separate site-fit decision.

Application contexts

01 · Industrial scale controlApply the documented load-cell measurement and weighing control only after confirming sensor circuit as Installed load cells and junction box.
02 · Batch weighingApply the documented load-cell measurement and weighing control only after confirming power as 24 VDC.
03 · Load-cell signal processingApply the documented load-cell measurement and weighing control only after confirming field functions as Three inputs, four outputs and one analog output.
04 · Verified weighing-system maintenanceApply the documented load-cell measurement and weighing control only after confirming host communication as Required TTY or RS232C connection documented.

Why choose Nordwel

Traceable identity7MH4553-1AA41 remains the controlling ordering reference.
Official-data boundaryUnsupported ratings and option meanings are excluded.
Application-led reviewSelection is tied to load-cell measurement and weighing control, not appearance.
Tiffany coordinationOne contact manages evidence, quotation and follow-up.
Application boundary: retain 7MH4553-1AA41, Load-cell input with local digital and analog process connections, and the approved site record as three independent checks.
Need help matching this Siemens configuration?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp