A communication module for integrating two RFID readers over EtherNet/IP, supplied without the connection block.
Brand:
SIEMENSItem NO.:
6GT2002-0JD20Goods Stock:
1Part Number:
6GT2002-0JD20Description:
A communication module for integrating two RFID readers over EtherNet/IP, supplied without the connection block.A communication module for integrating two RFID readers over EtherNet/IP, supplied without the connection block.
| Host protocol | EtherNet/IP |
|---|---|
| Reader ports | 2 |
| Connection block | Not included |
| Lifecycle | Cancelled 2023-10-01 |
| Published successor | 6GT2002-0JE20 |
| Net weight | 0.210 kg |
| Product status | Spare part |
Source: Siemens 6GT2002-0JD20 official product record.
Review the physical, electrical and environmental conditions that control installation of 6GT2002-0JD20.
Close each documented selection boundary for 6GT2002-0JD20 before purchase approval.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Analog-output reference for channel and load compatibility review.
Tiffany-verified targetDigital-input reference for signal and channel review.
Tiffany-verified targetProcessor reference for controller compatibility and configuration review.
Tiffany-verified targetDrive-interface reference for motion-system compatibility review.
Tiffany-verified targetCommunication-interface reference for protocol compatibility review.
Tiffany-verified targetLogic-module reference for control-function compatibility review.
Tiffany-verified targetThe official 6GT2002-0JD20 record gives reader ports as 2 for its rfid181eip communication module function. For dual-reader station, document both reader connections before changing the module. Test at a safe initial condition, then progress to the operating point defined by the approved procedure.
For this two-reader integration over ethernet/ip selection, published successor is 6GT2002-0JE20. For rfid conveyor cell, obtain and verify the separately required connection block. Do not translate a nearby suffix, catalog family or distributor description into an exact-model claim.
Use EtherNet/IP as the controlled industrial network value in the Industrial RFID communication modules review. For legacy identification network, preserve network addressing and scanner configuration. Release is appropriate only when the manufacturer value and the project requirement agree.
Host project is published as Existing scanner and data mapping retained for the Industrial RFID communication modules. For reader-port maintenance, run tag reads through each port independently. A substitution review must close functional, mechanical, electrical and environmental differences independently.
The official 6GT2002-0JD20 record gives reader ports as 2 for its rfid181eip communication module function. For dual-reader station, document both reader connections before changing the module. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.
For this two-reader integration over ethernet/ip selection, published successor is 6GT2002-0JE20. For rfid conveyor cell, obtain and verify the separately required connection block. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.
Use EtherNet/IP as the controlled industrial network value in the Industrial RFID communication modules review. For legacy identification network, preserve network addressing and scanner configuration. Mark the evidence source and revision so future reviewers can reproduce the decision.
Host project is published as Existing scanner and data mapping retained for the Industrial RFID communication modules. For reader-port maintenance, run tag reads through each port independently. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.
The official 6GT2002-0JD20 record gives reader ports as 2 for its rfid181eip communication module function. For dual-reader station, document both reader connections before changing the module. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.
For this two-reader integration over ethernet/ip selection, published successor is 6GT2002-0JE20. For rfid conveyor cell, obtain and verify the separately required connection block. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
