A compact IP67 reader with an integrated antenna, RS422 interface and a −25 to +70 °C operating range.
Brand:
SIEMENSItem NO.:
6GT2801-2BA10Goods Stock:
1Part Number:
6GT2801-2BA10Description:
A compact IP67 reader with an integrated antenna, RS422 interface and a −25 to +70 °C operating range.A compact IP67 reader with an integrated antenna, RS422 interface and a −25 to +70 °C operating range.
| Interface | RS422 |
|---|---|
| Communication method | 3964R |
| Antenna | Integrated |
| Protection | IP67 |
| Operating temperature | −25 to +70 °C |
| Dimensions | 75 × 75 × 41 mm |
| Weight | 0.3 kg |
| Lifecycle | Active product |
Source: Siemens 6GT2801-2BA10 official product record.
Review the physical, electrical and environmental conditions that control installation of 6GT2801-2BA10.
Close each documented selection boundary for 6GT2801-2BA10 before purchase approval.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Digital-input reference for signal and channel review.
Tiffany-verified targetProcessor reference for controller compatibility and configuration review.
Tiffany-verified targetExact-model reference for ordering-code verification.
Tiffany-verified targetDigital I/O reference for channel-assignment review.
Tiffany-verified targetCommunication-interface reference for protocol compatibility review.
Tiffany-verified targetAnalog-output reference for channel and load compatibility review.
Tiffany-verified targetFor this short-range tag identification selection, dimensions is 75 × 75 × 41 mm. For pallet identity stations, reserve the 75 × 75 × 41 mm envelope and connector access. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.
Use RS422 with 3964R support as the controlled host link value in the Compact industrial RFID readers review. For tool tracking fixtures, orient the integrated antenna to the qualified read zone. The commissioning sheet should name the instrument, method, acceptance limit and approving person.
Enclosure is published as IP67 installation for the Compact industrial RFID readers. For washdown material handling, use a sealed mating connection consistent with IP67 service. Use the value as a selection boundary, not as a prediction of site performance.
The official 6GT2801-2BA10 record gives communication method as 3964R for its rf340r gen2 rfid reader function. For compact rfid retrofit, test representative tags at the worst permitted target position. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.
For this short-range tag identification selection, operating temperature is −25 to +70 °C. For pallet identity stations, reserve the 75 × 75 × 41 mm envelope and connector access. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.
Use Active product as the controlled lifecycle value in the Compact industrial RFID readers review. For tool tracking fixtures, orient the integrated antenna to the qualified read zone. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.
Read zone is published as Application-tested distance and orientation for the Compact industrial RFID readers. For washdown material handling, use a sealed mating connection consistent with IP67 service. Log the comparison against the controlled parts list before the item enters the cabinet.
The official 6GT2801-2BA10 record gives interface as RS422 for its rf340r gen2 rfid reader function. For compact rfid retrofit, test representative tags at the worst permitted target position. Check the mating device, protective hardware and configured function before energization.
For this short-range tag identification selection, protection is IP67. For pallet identity stations, reserve the 75 × 75 × 41 mm envelope and connector access. The purchase description must retain units, polarity, wiring form and option wording exactly where they are published.
Use 0.3 kg as the controlled weight value in the Compact industrial RFID readers review. For tool tracking fixtures, orient the integrated antenna to the qualified read zone. Use a calibrated observation where measurement is possible and attach the result to receiving inspection.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
