A 24 VDC positioner-type controller with up to 512 positions for an IAI 42P pulse-motor actuator configuration.
Brand:
OthersItem NO.:
PCON-C-42PI-NP-2-0Goods Stock:
1Part Number:
PCON-C-42PI-NP-2-0Description:
A 24 VDC positioner-type controller with up to 512 positions for an IAI 42P pulse-motor actuator configuration.A 24 VDC positioner-type controller with up to 512 positions for an IAI 42P pulse-motor actuator configuration.
| Controller series | PCON-C |
|---|---|
| Control type | Positioner |
| Maximum positions | 512 |
| Motor code | 42P |
| I/O option | NP |
| Supply | 24 VDC |
| Maximum current | 2 A |
| Option code | 2-0 |
Source: IAI controller catalog exact-model table.
Review the physical, electrical and environmental conditions that control installation of PCON-C-42PI-NP-2-0.
Close each documented selection boundary for PCON-C-42PI-NP-2-0 before purchase approval.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Communication-interface reference for protocol compatibility review.
Tiffany-verified targetAnalog-output reference for channel and load compatibility review.
Tiffany-verified targetThermocouple-input reference for signal-range and wiring review.
Tiffany-verified targetExact-model reference for ordering-code verification.
Tiffany-verified targetCANopen master reference for field-network planning.
Tiffany-verified targetProcessor reference for controller compatibility and configuration review.
Tiffany-verified targetThe official PCON-C-42PI-NP-2-0 record gives option code as 2-0 for its pcon position controller function. For electric actuator positioning, back up position data and parameters before replacement. Keep the old and replacement assemblies available for a side-by-side check until the acceptance record is signed.
For this position control for a 42p pulse-motor actuator selection, position demand is Not above 512 positions. For indexing fixture, match the actuator motor code to 42P exactly. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.
Use PCON-C as the controlled controller series value in the PCON pulse-motor controllers review. For compact transfer axis, confirm the NP input/output wiring against the project schedule. Mark the evidence source and revision so future reviewers can reproduce the decision.
Motor code is published as 42P for the PCON pulse-motor controllers. For positioner-controller maintenance, home the axis and prove representative positions at reduced speed. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.
The official PCON-C-42PI-NP-2-0 record gives maximum current as 2 A for its pcon position controller function. For electric actuator positioning, back up position data and parameters before replacement. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.
For this position control for a 42p pulse-motor actuator selection, controller mode is Positioner. For indexing fixture, match the actuator motor code to 42P exactly. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.
Use NP option mapped to the installed machine as the controlled i/o assignment value in the PCON pulse-motor controllers review. For compact transfer axis, confirm the NP input/output wiring against the project schedule. The commissioning sheet should name the instrument, method, acceptance limit and approving person.
Maximum positions is published as 512 for the PCON pulse-motor controllers. For positioner-controller maintenance, home the axis and prove representative positions at reduced speed. Use the value as a selection boundary, not as a prediction of site performance.
The official PCON-C-42PI-NP-2-0 record gives supply as 24 VDC for its pcon position controller function. For electric actuator positioning, back up position data and parameters before replacement. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.
For this position control for a 42p pulse-motor actuator selection, actuator motor is 42P pulse-motor type. For indexing fixture, match the actuator motor code to 42P exactly. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
