other
Products
MLC-DN32H/DC MasterLogic 50 16-Input / 16-Output Controller
MLC-DN32H/DC MasterLogic 50 16-Input / 16-Output Controller
MLC-DN32H/DC MasterLogic 50 16-Input / 16-Output Controller

Honeywell MLC-DN32H/DC MasterLogic 50 16-Input / 16-Output Controller

EMAIL SALES
Honeywell official data reviewed
MLC-DN32H/DC — MasterLogic 50 16-Input / 16-Output Controller

A Honeywell compact controller whose official catalog record identifies sixteen 24 VDC inputs and sixteen sink transistor outputs.

MasterLogic 50 compact controllersCompact control with sixteen 24 VDC inputs and sixteen sink transistor outputsExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familyMasterLogic 50 compact controllers
Exact modelMLC-DN32H/DC
Verified functionCompact control with sixteen 24 VDC inputs and sixteen sink transistor outputs
Interface boundaryOfficial catalog designation MLC, 16 24V DI, 16TR. SINK-OUT, N-IEC
Official catalog typeTR Digital Output Module
Selection basisConfirm N-IEC variant, input supply, sink-output wiring, program backup and full slash-bearing order code.
  • Brand:

    Honeywell
  • Item NO.:

    MLC-DN32H/DC
  • Goods Stock:

    1
  • Part Number:

    MLC-DN32H/DC
  • Description:

    A Honeywell compact controller whose official catalog record identifies sixteen 24 VDC inputs and sixteen sink transistor outputs.
MLC-DN32H/DC configuration inquiry

Get a precise quote for MLC-DN32H/DC

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

MLC-DN32H/DC official identification

A Honeywell compact controller whose official catalog record identifies sixteen 24 VDC inputs and sixteen sink transistor outputs.

System responsibilityCompact control with sixteen 24 VDC inputs and sixteen sink transistor outputs
Connection envelopeOfficial catalog designation MLC, 16 24V DI, 16TR. SINK-OUT, N-IEC
Procurement decisionConfirm N-IEC variant, input supply, sink-output wiring, program backup and full slash-bearing order code.
Acceptance recordExact label, program archive, thirty-two-point I/O proof and controlled startup

Engineering and installation checks

  • The controlling identity is MLC-DN32H/DC; every character remains part of the order reference.
  • Back up the controller program and I/O assignment before removal.
  • Published facts are limited to Honeywell MasterLogic official product catalog.
Official product data

MLC-DN32H/DC key specifications

Official part number MLC-DN32H/DC
Official description MLC, 16 24V DI, 16TR. SINK-OUT, N-IEC
Digital inputs 16
Input voltage class 24 VDC
Digital outputs 16
Output type Sink transistor
Catalog category Spare Part
Official catalog type TR Digital Output Module

Source: Honeywell MasterLogic official product catalog.

Pre-order check 01

Installation environment

Prepare the masterlogic 50 16-input / 16-output controller by recording the installed connections, settings and complete nameplate.

  • Back up the controller program and I/O assignment before removal.
  • Preserve the slash in MLC-DN32H/DC on all order and receiving documents.
  • Verify the field circuit is compatible with sink transistor outputs.
  • Exercise all sixteen inputs and sixteen outputs under a controlled test.
Close the work with exact label, program archive, thirty-two-point I/O proof and controlled startup.
Pre-order check 02

Compatibility confirmation

Approve MLC-DN32H/DC only when its documented function and every listed boundary agree with the installed design.

Exact identity
MLC-DN32H/DC
Input requirement
16 points at 24 VDC
Output requirement
16 sink transistor points
Project asset
Installed program and parameter archive
Variant
N-IEC designation retained
Final selection: Use only the values published for MLC-DN32H/DC in Honeywell MasterLogic official product catalog; site suitability remains an engineering decision.
Recommended model families

Verified Cross-Brand Models

Tiffany verified models 01Siemens 6ES7517-3UP00-0AB0Siemens 6ES7518-4UP00-0AB0B&R 8BVI0330HWS0.000-1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02B&R X20IF2181-2B&R 8B0C0320HW00.000-1Siemens 6GK1161-6AA02

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03Siemens 6SL3120-1TE15-0AA4Siemens 6SL3040-0LA00-0AA1Siemens 6ES7157-0AA82-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04Siemens 6ES7407-0RA01-0AA0Siemens 6ES5305-7LA11B&R 8BVI0220HWD0.000-1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01Siemens 6ES7654-7HC00-0XA0ABB AI563ABB AO568

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB CD522ABB CI541-DPABB CI542-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB CI592-CS31ABB CM5640-2ETHABB CM582-DP

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB CM588-CNABB CM589-PNIOABB CM598-CN

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05ABB DC562ABB DO526ABB DO572

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06ABB PM5032-R-ETHABB PM5072-T-2ETHABB PM564-RP-AC

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Yokogawa ATSA3S-0Yokogawa ATSS3D-0Siemens 6ES7357-4AH01-0AE0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08Siemens 6ES7400-2JA10-0AA1Siemens 6ES7414-2XG02-0AB0Siemens 6ES7416-2XL01-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

MLC-DN32H/DC Order Guide

Use the complete Honeywell designation and installed hardware record for engineering review.
1Ordering identityMLC-DN32H/DC
2Manufacturer evidenceHoneywell MasterLogic official product catalog
3Installed-condition capturePreserve the slash in MLC-DN32H/DC on all order and receiving documents.
4Compatibility gateExact identity: MLC-DN32H/DC
5Commissioning proofExact label, program archive, thirty-two-point I/O proof and controlled startup
6Release decisionConfirm N-IEC variant, input supply, sink-output wiring, program backup and full slash-bearing order code.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of MLC-DN32H/DC.

Support scope

Official part number evidenceMLC-DN32H/DC is checked against the received unit.
Input requirement review16 points at 24 VDC
Digital inputs checkpoint16
Acceptance packageExact label, program archive, thirty-two-point I/O proof and controlled startup

MLC-DN32H/DC FAQ

What I/O combination is documented for MLC-DN32H/DC?

The official description specifies sixteen 24 VDC digital inputs and sixteen sink-transistor outputs. The N-IEC designation is part of the reviewed identity.

Why must the slash remain in the model code?

MLC-DN32H/DC is the complete part number used for ordering and receiving control. Removing the slash can create an ambiguous search or an incorrect asset record.

Which output-circuit characteristic must be checked first?

The outputs are sink transistor points. Confirm that field loads, polarity, commons and protective devices are compatible with sinking operation.

What preparation protects the installed logic before exchange?

Back up the controller program, I/O assignment and current parameter record under revision control. Verify that the backup can be restored before removing hardware.

How should the sixteen inputs be accepted?

Exercise each 24 VDC input from its field source and compare the observed state with the approved I/O list. Record point-level results rather than a single module pass.

What test is required for the sixteen transistor outputs?

Command each output under safe conditions and verify the intended load response, polarity and diagnostic indication. Isolate any circuit that cannot be tested safely.

Can a sourcing-output version be used in the same wiring?

Not without an engineering change. This exact code is documented for sink outputs, and field common arrangements differ from sourcing circuits.

Which host information belongs in the replacement record?

Record the MasterLogic 50 station, module position, project revision and channel assignment. Exact mechanical fit alone does not prove application compatibility.

What receiving detail confirms the N-IEC variant?

The full label must show MLC-DN32H/DC and the official description including N-IEC. Retain a focused label image plus an overall condition photograph.

What constitutes a complete post-installation release?

Confirm program restoration, recognition without hardware mismatch, all sixteen inputs, all sixteen sink outputs and closed diagnostics. Attach the signed point-test record to the asset history.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
MasterLogic 50 compact controllers application review

MLC-DN32H/DC Applications

These contexts use MLC-DN32H/DC for compact control with sixteen 24 vdc inputs and sixteen sink transistor outputs; each requires its own installed-system evidence.

Application contexts

01 · Compact machine controllerApply the documented compact control with sixteen 24 vdc inputs and sixteen sink transistor outputs only after confirming exact identity as MLC-DN32H/DC.
02 · Mixed digital control panelApply the documented compact control with sixteen 24 vdc inputs and sixteen sink transistor outputs only after confirming input requirement as 16 points at 24 VDC.
03 · Legacy MasterLogic replacementApply the documented compact control with sixteen 24 vdc inputs and sixteen sink transistor outputs only after confirming output requirement as 16 sink transistor points.
04 · Thirty-two-point controller spareApply the documented compact control with sixteen 24 vdc inputs and sixteen sink transistor outputs only after confirming project asset as Installed program and parameter archive.

Why choose Nordwel

Official part number traceabilityMLC-DN32H/DC is reviewed against MLC-DN32H/DC.
Official description boundaryMLC, 16 24V DI, 16TR. SINK-OUT, N-IEC is checked independently.
Output requirement control16 sink transistor points
Coordinated releaseTiffany manages evidence, quotation and exact label, program archive, thirty-two-point i/o proof and controlled startup.
Keep exact identity, project asset and final acceptance as separate decisions.
Need Tiffany to verify the MLC-DN32H/DC evidence package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp