other
Products
6GK5204-0BA00-2BA3 SCALANCE X204IRT Managed Real-Time Ethernet Switch
6GK5204-0BA00-2BA3 SCALANCE X204IRT Managed Real-Time Ethernet Switch
6GK5204-0BA00-2BA3 SCALANCE X204IRT Managed Real-Time Ethernet Switch

Siemens 6GK5204-0BA00-2BA3 SCALANCE X204IRT Managed Real-Time Ethernet Switch

EMAIL SALES
Siemens official data reviewed
6GK5204-0BA00-2BA3 — SCALANCE X204IRT Managed Real-Time Ethernet Switch

A four-port managed real-time switch supporting RT and IRT communication as a PROFINET IO device.

SCALANCE X-200 IRT switchesFour-port deterministic Ethernet switchingExact-order review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
Officially reviewed product profile
Product familySCALANCE X-200 IRT switches
Exact model6GK5204-0BA00-2BA3
Verified functionFour-port deterministic Ethernet switching
Interface boundaryFour 10/100 Mbit/s RJ45 ports with real-time network support
Typical power loss3.4 W
Selection basisConfirm four-port copper topology, firmware baseline, 24 VDC supply and real-time network requirements.
  • Brand:

    SIEMENS
  • Item NO.:

    6GK5204-0BA00-2BA3
  • Goods Stock:

    1
  • Part Number:

    6GK5204-0BA00-2BA3
  • Description:

    A four-port managed real-time switch supporting RT and IRT communication as a PROFINET IO device.
6GK5204-0BA00-2BA3 configuration inquiry

Get a precise quote for 6GK5204-0BA00-2BA3

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6GK5204-0BA00-2BA3 official identification

A four-port managed real-time switch supporting RT and IRT communication as a PROFINET IO device.

System responsibilityFour-port deterministic Ethernet switching
Connection envelopeFour 10/100 Mbit/s RJ45 ports with real-time network support
Procurement decisionConfirm four-port copper topology, firmware baseline, 24 VDC supply and real-time network requirements.
Acceptance recordFirmware record, port topology, device-name check and cycle-time verification

Engineering and installation checks

  • The controlling identity is 6GK5204-0BA00-2BA3; every character remains part of the order reference.
  • Back up the device name, network parameters and diagnostic configuration.
  • Published facts are limited to Siemens SCALANCE X-200 operating instructions.
Official product data

6GK5204-0BA00-2BA3 key specifications

RJ45 ports 4
Port speed 10/100 Mbit/s
Real-time modes RT and IRT
Network role PROFINET IO device
Management Managed switch
Firmware reference V5.5 device support
Nominal supply 24 VDC
Typical power loss 3.4 W
Typical current 140 mA
Dimensions 60 × 125 × 124 mm
Approximate weight 780 g
Mounting DIN rail, profile rail or wall

Source: Siemens SCALANCE X-200 operating instructions.

Pre-order check 01

Installation environment

Prepare the scalance x204irt managed real-time ethernet switch by recording the installed connections, settings and complete nameplate.

  • Back up the device name, network parameters and diagnostic configuration.
  • Keep all four RJ45 port assignments aligned with the engineered topology.
  • Confirm the supply is isolated and discharged before exchanging the switch.
  • Verify real-time communication and port diagnostics after startup.
Close the work with firmware record, port topology, device-name check and cycle-time verification.
Pre-order check 02

Compatibility confirmation

Approve 6GK5204-0BA00-2BA3 only when its documented function and every listed boundary agree with the installed design.

Port layout
Four RJ45 interfaces
Network timing
RT/IRT project requirement
Device integration
PROFINET IO device
Power
24 VDC, approximately 140 mA
Firmware
Project hardware catalog and device version must agree
Final selection: Use only the values published for 6GK5204-0BA00-2BA3 in Siemens SCALANCE X-200 operating instructions; site suitability remains an engineering decision.
Recommended model families

More Siemens models

Siemens verified models 01Siemens 6SL3040-0LA00-0AA1Siemens 6ES7157-0AA82-0XA0Siemens 6ES7407-0RA01-0AA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 02Siemens 6ES5305-7LA11Siemens 6ES7551-1AB00-0AB0Siemens 6ES7553-1AA00-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 03Siemens 6ED1052-1MD08-0BA2Siemens 6ES7521-7EH00-0AB0Siemens 6ES7414-3FM07-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Siemens verified models 04Siemens 6ES7416-3FS07-0AB0Siemens 6ES7654-7HB00-0XA0Siemens 6ES7654-7HC00-0XA0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Additional published brands

Additional Advantage Models

Tiffany verified models 01ABB CM582-DPABB CM588-CNABB CM589-PNIO

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 02ABB CM598-CNABB DC562ABB DO526

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 03ABB DO572ABB PM5032-R-ETHABB PM5072-T-2ETH

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 04ABB PM564-RP-ACYokogawa ATSA3S-0Yokogawa ATSS3D-0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 05Siemens 6ES7357-4AH01-0AE0Siemens 6ES7400-2JA10-0AA1Siemens 6ES7414-2XG02-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 06Siemens 6ES7416-2XL01-0AB0Siemens 6ES7425-2AD00-0AA0Siemens 6ES7515-2AN03-0AB0

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 07Siemens 6ES7517-3UP00-0AB0Siemens 6ES7518-4UP00-0AB0B&R 8BVI0330HWS0.000-1

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Tiffany verified models 08B&R X20IF2181-2B&R 8B0C0320HW00.000-1Siemens 6GK1161-6AA02

Each target page displays Tiffany Guan and sales2@mooreplc.com.

Every model above links to an existing Nordwel page. Confirm the complete model before ordering.CHECK WITH SALES

6GK5204-0BA00-2BA3 Order Guide

Use the complete Siemens designation and installed hardware record for engineering review.
1Ordering identity6GK5204-0BA00-2BA3
2Manufacturer evidenceSiemens SCALANCE X-200 operating instructions
3Installed-condition captureKeep all four RJ45 port assignments aligned with the engineered topology.
4Compatibility gatePort layout: Four RJ45 interfaces
5Commissioning proofFirmware record, port topology, device-name check and cycle-time verification
6Release decisionConfirm four-port copper topology, firmware baseline, 24 VDC supply and real-time network requirements.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
SCHNEIDER ELECTRIC / OUTPUT MODULEBMXDDO1602

Output-module reference for control-system projects.

Tiffany-verified target
SCHNEIDER ELECTRIC / ETHERNET MODULEBMENOC0301

Ethernet-module reference for network compatibility review.

Tiffany-verified target
VIBRO-METER / PROXIMITY SENSORAF70982 / 111-412-000-012

Proximity-sensor reference for machinery applications.

Tiffany-verified target
VIBRO-METER / ACCELEROMETERS3960 AC46286 / 144-201-000-222

Accelerometer reference for vibration-monitoring projects.

Tiffany-verified target
WESTINGHOUSE / PROCESSOR MODULE5X00241G02

Processor-module reference for installed control systems.

Tiffany-verified target
ABB / ANALOG INPUT BOARDDSTA002B / 3BSE018317R1

Analog-input board reference for replacement review.

Tiffany-verified target
Nordwel engineering support

Company Services & FAQ

Support for exact-code review, sourcing, receiving and controlled release of 6GK5204-0BA00-2BA3.

Support scope

RJ45 ports evidence4 is checked against the received unit.
Network timing reviewRT/IRT project requirement
Real-time modes checkpointRT and IRT
Acceptance packageFirmware record, port topology, device-name check and cycle-time verification

6GK5204-0BA00-2BA3 FAQ

Which real-time modes are supported by 6GK5204-0BA00-2BA3?

The manufacturer data lists both RT and IRT operation. The project hardware catalog, device name and timing design must match the installed firmware baseline.

How many field links can be landed directly on this version?

Four 10/100 Mbit/s RJ45 interfaces are provided. Preserve their engineered assignments because changing a physical port can affect topology diagnostics.

What configuration must be backed up before removal?

Save the device name, IP and network parameters, diagnostics and any managed-switch settings. Label the backup with the exact article and installed location.

Why does firmware compatibility need a separate check?

The official reference includes V5.5 device support, while projects may carry a defined hardware-catalog version. Confirm that the replacement is recognized without silently changing the approved project.

What supply figures should be used for an electrical review?

Use 24 VDC, approximately 140 mA typical current and 3.4 W typical power loss. Verify protection and conductor sizing against the complete panel design.

Can this switch be commissioned by link LEDs alone?

No. LEDs show physical status but do not prove RT/IRT timing, PROFINET device integration or topology diagnostics. Complete the project-level communication checks.

Which mounting choices are documented?

DIN rail, profile rail or wall mounting are listed. Confirm orientation, clearances and connector access for the selected arrangement.

What is the safe sequence for exchanging the four-port unit?

Isolate and verify the 24 VDC supply, record all four port positions, replace the module, then restore power and controlled configuration. Follow the site electrical-safety procedure throughout.

How should commissioning evidence be organized?

Record the exact model, restored configuration revision, per-port link status, PROFINET diagnostics and RT/IRT acceptance result. Keep the report with the asset history.

What distinguishes this article from another four-port Ethernet switch?

6GK5204-0BA00-2BA3 is a managed PROFINET IO device with RT/IRT support, not merely a four-port forwarding device. Selection must cover firmware and deterministic-network requirements.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
SCALANCE X-200 IRT switches application review

6GK5204-0BA00-2BA3 Applications

These contexts use 6GK5204-0BA00-2BA3 for four-port deterministic ethernet switching; each requires its own installed-system evidence.

Application contexts

01 · Deterministic machine EthernetApply the documented four-port deterministic ethernet switching only after confirming port layout as Four RJ45 interfaces.
02 · Synchronized production cellApply the documented four-port deterministic ethernet switching only after confirming network timing as RT/IRT project requirement.
03 · Four-port IRT segmentApply the documented four-port deterministic ethernet switching only after confirming device integration as PROFINET IO device.
04 · Legacy real-time switch replacementApply the documented four-port deterministic ethernet switching only after confirming power as 24 VDC, approximately 140 mA.

Why choose Nordwel

RJ45 ports traceability6GK5204-0BA00-2BA3 is reviewed against 4.
Port speed boundary10/100 Mbit/s is checked independently.
Device integration controlPROFINET IO device
Coordinated releaseTiffany manages evidence, quotation and firmware record, port topology, device-name check and cycle-time verification.
Keep port layout, power and final acceptance as separate decisions.
Need Tiffany to verify the 6GK5204-0BA00-2BA3 evidence package?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Power & CommunicationIS200STAIH2ADCGE analog terminal board reference; confirm the installed I/O arrangement.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp