The official Siemens 1 m I/O expansion cable used to extend the S7-200 SMART expansion-bus connection between supported module groups. It uses a male-to-female expansion connection, has an approximate weight of 80 g and supports remote module-group placement.
Brand:
SIEMENSItem NO.:
6ES7288-6EC01-0AA0Part Number:
6ES7288-6EC01-0AA0Weight:
80 gDimensions:
1 m cable lengthCertification:
Official Siemens documentation verifiedDescription:
The official Siemens 1 m I/O expansion cable used to extend the S7-200 SMART expansion-bus connection between supported module groups.Siemens identifies 6ES7288-6EC01-0AA0 as 1 m S7-200 SMART I/O expansion cable. The official Siemens 1 m I/O expansion cable used to extend the S7-200 SMART expansion-bus connection between supported module groups.
Published controller products with verified Tiffany Guan contact details.
Published Siemens field-I/O products with verified sales contacts.
Published monitoring products with verified Tiffany Guan contact details.
Additional published automation products with verified sales contacts.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
All linked pages list Tiffany Guan, sales2@mooreplc.com and +86 18030235313.
Use the exact manufacturer order number and verify the system constraints before procurement.
Specify 6ES7288-6EC01-0AA0 exactly.
Use the documented 1 m length only where the panel layout needs that reach.
Confirm every module in the extended group is supported by the selected S7-200 SMART CPU.
Check backplane current and external 24 V demand before dividing the station.
Install the male and female ends according to the Siemens system-manual diagram.
Observe cabinet routing, bend, separation and strain-relief practices.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Auxiliary relay option for protection and control applications.
Recent Middle East inquirySIMATIC S7-200 SMART RS485 communication board.
Recent Middle East inquiryRemote I/O gateway for demanding process-system environments.
Specialist brandReplacement inverter driver board for installed industrial systems.
Specialist brandAmplifier transducer for load-cell signal conditioning.
Specialist brandIndustrial power-supply model for legacy equipment support.
Specialist brandAnswers below use Siemens official product documentation for this exact order number.
It is the official Siemens S7-200 SMART I/O expansion cable.
The system manual specifies 1 m.
Approximately 80 g.
No. It only carries the expansion-bus connection between supported module groups.
No. It is a dedicated S7-200 SMART I/O expansion cable.
No. The selected CPU expansion and power limits remain unchanged.
Siemens illustrates a male-to-female connection between the module groups.
Confirm the exact CPU, module order, station power budget, required 1 m reach and installed connector orientation.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Use the verified electrical, lifecycle and system limits—not generic family assumptions—to decide suitability.
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :