A 1600 × 1200 color CCD camera with a C mount, 30 fps maximum frame rate and programmable electronic shutter.
Brand:
OthersItem NO.:
FZ-SC2MGoods Stock:
1Part Number:
FZ-SC2MDescription:
A 1600 × 1200 color CCD camera with a C mount, 30 fps maximum frame rate and programmable electronic shutter.A 1600 × 1200 color CCD camera with a C mount, 30 fps maximum frame rate and programmable electronic shutter.
| Sensor | 1/1.8-inch color CCD |
|---|---|
| Effective pixels | 1600 × 1200 |
| Pixel size | 4.4 × 4.4 µm |
| Maximum frame rate | 30 fps |
| Electronic shutter | 20 µs to 100 ms |
| Partial scan | 12 to 1200 lines |
| Lens mount | C mount |
| Operating temperature | 0 to 40 °C |
| Humidity | 35–85% RH |
Source: Omron FZ5 Vision System data sheet.
Review the physical, electrical and environmental conditions that control installation of FZ-SC2M.
Close each documented selection boundary for FZ-SC2M before purchase approval.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Each target page displays Tiffany Guan and sales2@mooreplc.com.
Selected specialist-brand products requested for regional projects and available on Nordwel.
Triac-output reference for AC load compatibility review.
Tiffany-verified targetRack reference for mechanical and module-placement review.
Tiffany-verified targetPosition-input reference for signal and interface review.
Tiffany-verified targetExact-model reference for ordering-code verification.
Tiffany-verified targetCounter and PWM reference for timing-function selection.
Tiffany-verified targetMotion-control reference for axis and interface review.
Tiffany-verified targetFor this high-resolution color image acquisition selection, pixel size is 4.4 × 4.4 µm. For precision color inspection, choose C-mount optics for the required field of view and resolution. Preserve both the as-found condition and the final test so the next maintenance action starts from verified evidence.
Use 12 to 1200 lines as the controlled partial scan value in the FZ-series digital vision cameras review. For feature measurement, secure the camera cable without exceeding its bend limit. Mark the evidence source and revision so future reviewers can reproduce the decision.
Humidity is published as 35–85% RH for the FZ-series digital vision cameras. For fine-part presence detection, control lighting before tuning shutter and inspection thresholds. Any mismatch requires an engineering disposition rather than an undocumented field adaptation.
The official FZ-SC2M record gives optics as C-mount lens for its two-megapixel color ccd camera function. For legacy ccd camera service, use a calibrated target to restore focus and scale. Quarantine a received unit if the label, connection, envelope or documented duty differs from the approved request.
For this high-resolution color image acquisition selection, sensor is 1/1.8-inch color CCD. For precision color inspection, choose C-mount optics for the required field of view and resolution. If the official record is ambiguous, omit the disputed value and request nameplate or manufacturer clarification.
Use 30 fps as the controlled maximum frame rate value in the FZ-series digital vision cameras review. For feature measurement, secure the camera cable without exceeding its bend limit. The commissioning sheet should name the instrument, method, acceptance limit and approving person.
Lens mount is published as C mount for the FZ-series digital vision cameras. For fine-part presence detection, control lighting before tuning shutter and inspection thresholds. Use the value as a selection boundary, not as a prediction of site performance.
The official FZ-SC2M record gives controller path as Supported FZ/FH vision controller for its two-megapixel color ccd camera function. For legacy ccd camera service, use a calibrated target to restore focus and scale. Acceptance requires the documented feature to work in the installed chain without unexplained diagnostics.
For this high-resolution color image acquisition selection, acquisition rate is Application within 30 fps maximum. For precision color inspection, choose C-mount optics for the required field of view and resolution. Trace the value to the cited manufacturer source and the as-installed drawing as separate evidence items.
Use 1600 × 1200 as the controlled effective pixels value in the FZ-series digital vision cameras review. For feature measurement, secure the camera cable without exceeding its bend limit. Confirm the relevant channel, port, jaw, axis or circuit individually instead of accepting a family-level statement.
Software, licensing, controller, interface, shield and power-supply references.
Internal cable references for 40-channel input and output connections to field termination assemblies.
I/O Companion Slot to FTA · 2.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
I/O Companion Slot to FTA · 10.5 m
I/O Companion Slot to FTA · 12.5 m
I/O Companion Slot to FTA · 4.5 m
I/O Companion Slot to FTA · 6.5 m
I/O Companion Slot to FTA · 8.5 m
Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.
Related Tags :
TOp 1
Disclaimer:
Nordwel sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
