other
Products
Siemens 6ES5470-4UC13 470-4 eight-channel analog output module product image
Siemens 6ES5470-4UC13 470-4 eight-channel analog output module product image
Siemens 6ES5470-4UC13 470-4 eight-channel analog output module product image

Siemens 6ES5470-4UC13 470-4 eight-channel analog output module

EMAIL SALES
Manufacturer data reviewed
6ES5470-4UC13 — 470-4 eight-channel analog output module

6ES5470-4UC13 delivers eight isolated analog outputs for 1–5 V and 4–20 mA signals. Confirm the recorded output-loop arrangement before commissioning.

SiemensS5 compact U analog output modulesExact-model review
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES5470-4UC13 verified profile
ManufacturerSiemens
Exact model6ES5470-4UC13
Product type470-4 eight-channel analog output module
Product familyS5 compact U analog output modules
Primary role8 isolated analog outputs
Interface context1–5 V and 4–20 mA
  • Brand:

    SIEMENS
  • Item NO.:

    6ES5470-4UC13
  • Goods Stock:

    1
  • Part Number:

    Siemens
  • Weight:

    6ES5470-4UC13
  • Dimensions:

    470-4 eight-channel analog output module
  • Manufacture Year:

    S5 compact U analog output modules
  • Certification:

    Delivers eight isolated analog output signals
  • Description:

    1–5 V and 4–20 mA output paths
6ES5470-4UC13 configuration inquiry

Get a precise quote for 6ES5470-4UC13

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES5470-4UC13 official identification

Delivers eight isolated analog output signals. 1–5 V and 4–20 mA output paths.

Installed roleDelivers eight isolated analog output signals
Interface context1–5 V and 4–20 mA output paths
Exact-code controlUse 6ES5470-4UC13 without suffix substitution.
Evidence basisOfficial Siemens product record

Engineering and installation checks

  • Confirm 6ES5470-4UC13 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
Official product data

6ES5470-4UC13 key specifications

Exact article number 6ES5470-4UC13
Module designation 470-4
Analog outputs 8
Voltage output range 1–5 V
Current output range 4–20 mA
Isolation Isolated outputs
Mechanical format Compact U
Packaging dimensions 26.7 × 21.3 × 3.5 cm
Net weight 0.743 kg

Source: Official Siemens product record.

Pre-order check 01

Installation environment

Verify the installed conditions before this exact model is removed or energized.

  • Confirm 6ES5470-4UC13 from the complete nameplate before removal.
  • Record the installed mounting, terminal or connector arrangement and neighboring hardware.
  • Verify supply, grounding, signal type and environmental conditions against the approved design.
  • After installation, complete controlled power, diagnostic, communication and functional checks.
Record the as-found installation and final controlled checks.
Pre-order check 02

Compatibility confirmation

Match every item to the installed configuration.

Complete identity
6ES5470-4UC13
Product family
S5 compact U analog output modules
Installed role
Delivers eight isolated analog output signals
Interface boundary
1–5 V and 4–20 mA output paths
Verification source
Official Siemens product record
Final selection: match the complete 6ES5470-4UC13 identity before order release.
Recommended model families

More Siemens models

Siemens selection 01Siemens 6AV2124-1DC01-0XA0Siemens 6AV2124-2DC01-0AB0Siemens 6AV2125-2AE03-0AX0

Confirm the complete order code and installed-system context before replacement.

Siemens selection 02Siemens 6AV2125-2AE13-0AX0Siemens 6AV6542-0DA10-0AX0Siemens 6AV6642-8BA10-0AA0

Confirm the complete order code and installed-system context before replacement.

Siemens selection 03Siemens 6AV6542-0AC15-2AX0Siemens 6AV6381-2BN07-0AV0Siemens 6AV3688-3EH47-0AX0

Confirm the complete order code and installed-system context before replacement.

Siemens selection 04Siemens 6AV3617-1JC30-0AX2Siemens 6AV3617-1JC00-0AX1Siemens 6AV3607-1JC02-0AX1

Confirm the complete order code and installed-system context before replacement.

Additional published brands

Additional Advantage Models

Additional selection 01Siemens 6SY8102-0LA02Siemens 6AV3505-1FB12Siemens 6AV3017-1NE30-0AX0

Confirm the complete order code and installed-system context before replacement.

Additional selection 02Siemens 6AV2124-0MC01-0AB0Siemens 6AV2124-0QC02-0AX2GE IC695ACC400-CA

Confirm the complete order code and installed-system context before replacement.

Additional selection 03GE IC695ACC402-AAGE IC695ALG600-CCGE IC695ALG608-CA

Confirm the complete order code and installed-system context before replacement.

Additional selection 04GE IC695ALG616-LFGE IC695ALG626-CAGE IC695ALG704-CB

Confirm the complete order code and installed-system context before replacement.

Additional selection 05GE IC695CHS012-DRGE IC695CHS016-EAGE IC695CMM002

Confirm the complete order code and installed-system context before replacement.

Additional selection 06GE IC695CMM004-BFGE IC695CMU310-DMGE IC695CPE302

Confirm the complete order code and installed-system context before replacement.

Additional selection 07GE IC695CPE305-AFBAGE IC695SPF002BGE IC695RMX228-ACAB

Confirm the complete order code and installed-system context before replacement.

Additional selection 08GE IC695PSD040MGE IC695PSD040GE IC695PNS001-BCBD

Confirm the complete order code and installed-system context before replacement.

Send the complete order code and installed-system record for configuration and availability review.CHECK WITH SALES

6ES5470-4UC13 Order Guide

A controlled six-step review for the complete submitted identity.
1Read the complete order code6ES5470-4UC13
2Capture the full nameplate1–5 V and 4–20 mA output paths
3Record the installed context1–5 V and 4–20 mA output paths
4Verify interfaces and settings1–5 V and 4–20 mA output paths
5Plan commissioning checks1–5 V and 4–20 mA output paths
6Request an exact-code quotation1–5 V and 4–20 mA output paths

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Recent demand based on Nordwel inquiry records.
Confirm the exact part number before ordering.
AREVA / Protection RelayMVAJ101RA0802A

Auxiliary relay option for protection and control applications.

Recent Middle East inquiry
Hirschmann / Fiber OpticOZD Profi 12M G11

Industrial PROFIBUS fiber-optic communication module.

Recent Middle East inquiry
Pepperl+Fuchs / Remote I/ORSD-GW3-Ex2.DPE

Remote I/O gateway for demanding process-system environments.

Specialist brand
Schneider Electric / Drive BoardPN072132P902 / 3D658187G901

Replacement inverter driver board for installed industrial systems.

Specialist brand
Load Cell Central / Signal ConditioningOM-19-2

Amplifier transducer for load-cell signal conditioning.

Specialist brand
XP Power / Power SupplyF7A4K6G2 / A1A0100275

Industrial power-supply model for legacy equipment support.

Specialist brand
Nordwel customer support

Company Services & FAQ

Practical exact-model selection, quotation and order coordination for 6ES5470-4UC13.

Company services

Exact-model checkReview 6ES5470-4UC13, the installed equipment record and configuration evidence before quotation.
Fast quotation supportConfirm current pricing, availability, condition and lead time.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through Tiffany Guan.

6ES5470-4UC13 FAQ

Why does eight output channels matter when specifying 6ES5470-4UC13?

Use the full 6ES5470-4UC13 marking and the intended operating role to assess eight output channels. The documented analog outputs are 8. Selection should be based on documented function, not appearance or a shared family name.

Which compatibility checks apply to 1–5 V output range on 6ES5470-4UC13?

For 1–5 V output range, compare the exact model, host assembly, terminal hardware, interface and controlled configuration. The documented voltage output range is 1–5 V. Mechanical fit alone does not establish compatibility.

How should 4–20 mA output range be handled during installation of 6ES5470-4UC13?

For 4–20 mA output range, record the as-found position, isolate the affected equipment and verify the mounting hardware. The documented current output range is 4–20 mA. Complete clearance, grounding and environmental checks before restoring power.

Which terminal and interface checks apply to isolated output boundary for 6ES5470-4UC13?

Check isolated output boundary from end to end, including conductor identification, reference potential, shield termination and connected load. The documented isolation is Isolated outputs. Correct any discrepancy before the circuit is energized.

What proves that compact U mechanical fit is compatible with a 6ES5470-4UC13 application?

Compare compact U mechanical fit with the actual S5 compact U analog output modules hardware and software baseline. The documented mechanical format is Compact U. A family-level match is insufficient if the model, interface or configuration differs.

What should the connection review cover for output loop record on 6ES5470-4UC13?

Review output loop record against terminal numbers, polarity, signal type, shielding and cable routing on the controlled drawings. The documented analog outputs are 8. Label every conductor before disconnection and verify each point after reconnection.

Which acceptance test demonstrates load verification after 6ES5470-4UC13 is installed?

Prove load verification by exercising the assigned function under safe test conditions and comparing the response with the approved expectation. Resolve every deviation before handover.

What results confirm analog output test during final checks on 6ES5470-4UC13?

For analog output test, check power-up status, host recognition and the relevant input, output or communication response. The documented analog outputs are 8. Acceptance is complete only when the result is documented and alarms are clear.

How should engineers carry out controlled commissioning on 6ES5470-4UC13?

Carry out controlled commissioning during a controlled startup with the affected process or machine protected from unintended action. Confirm communication, diagnostics and the assigned function before normal operation.

How should final handover check be verified before 6ES5470-4UC13 returns to service?

Verify final handover check with a controlled startup and a test of only the intended channel, signal, communication path or safety action. Confirm normal diagnostics and record the result before return to service.

Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens exact-model support

Applications & Why Choose Nordwel

Typical inquiry contexts for 6ES5470-4UC13.

Application areas

01Eight-channel analog commandDeliver eight isolated analog output signals through 6ES5470-4UC13.
021–5 V actuator referencesProvide documented 1–5 V commands to compatible field equipment.
034–20 mA control loopsDrive documented 4–20 mA control and indication paths.
04Compact U output expansionRestore isolated analog output capacity in the Compact U format.

Why choose Nordwel

Configuration-aware supportReview the stated rack, front module, rear I/O and sensor-chain context before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Final suitability depends on the complete model and installed design.
Need help matching 6ES5470-4UC13?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp