other
Products
Bently Nevada 330904-00-05-05-01-00 armored M8 proximity probe product photographs
Bently Nevada 330904-00-05-05-01-00 armored M8 proximity probe product photographs
Bently Nevada 330904-00-05-05-01-00 armored M8 proximity probe product photographs

Bently Nevada 330904-00-05-05-01-00 armored M8 proximity probe

EMAIL SALES
Bently Nevada 3300 XL NSv
330904-00-05-05-01-00 — armored M8 proximity probe

Uses an armored lead with an M8×1 case and a 50 mm body selection. The connector protector and 0.5 m electrical-length selection define the connection arrangement.

Bently Nevada3300 XL NSvarmored M8 proximity probe
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
330904-00-05-05-01-00 product profile
Product family3300 XL NSv
Exact model330904-00-05-05-01-00
ThreadM8×1
Case length50 mm
Total length0.5 m
Approval selectionNo hazardous-area approval
  • Brand:

    Bently Nevada
  • Item NO.:

    330904-00-05-05-01-0
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

330904-00-05-05-01-00 configuration inquiry

Get a precise quote for 330904-00-05-05-01-00

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

330904-00-05-05-01-00 functions and installation

330904-00-05-05-01-00 uses the NSv armored metric probe construction. The ordered case length is 50 mm.

MeasurementSenses target proximity without contact
MountingMetric M8×1 threaded case
Cable protectionArmored lead and protected junction
Chain selectionMatch NSv components and length

Installation and selection boundaries

  • Uses the NSv armored metric probe construction
  • The ordered case length is 50 mm
  • Its integral total length is 0.5 m
Official product data

330904-00-05-05-01-00 key specifications

Case thread M8×1
Unthreaded length 0 mm
Overall case length 50 mm
Total length 0.5 m
Armor Included
Connector ClickLoc with connector protector
Cable Standard
Approval option No hazardous-area approval

Bently Nevada technical data: 147385; ordering tables and applicable installation notes.

Pre-order check 01

Installation environment

Check access, mechanical support and environmental conditions before fitting this item.

  • Check the M8×1 receiving thread and case clearance.
  • Keep suitable side and rear clearance around the sensing end.
  • Restrain the armored route without loading the coaxial joint.
  • Verify electrical gap and the actual approval conditions before operation.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Transducer family
Use the matching NSv system.
Mechanical fit
M8×1, 50 mm case, zero unthreaded length.
Electrical length
Include the 0.5 m probe length in system selection.
Junction
Standard cable and ClickLoc connector protector.
Approval
No hazardous-area approval; follow the actual marking and installation conditions.
Confirm the complete ordering code, supplied scope and installation conditions before replacement.
Recommended model families

More Bently Nevada models

Bently NevadaBently Nevada 330876-03-10-00-00Bently Nevada 330903-00-07-10-01-00Bently Nevada 330104-00-08-15-02-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330876-01-50-01-05Bently Nevada 330906-02-12-10-02-05Bently Nevada 330130-075-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330879-03-00Bently Nevada 330130-070-01-00Bently Nevada 330902-00-95-05-02-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330180-X1-05Bently Nevada 330854-080-24-05Bently Nevada 330854-080-25-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

SiemensSiemens 6ES5921-3WB12Siemens 6ES7143-4BF50-0AA0Siemens 6ES5941-7UA12

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC200BEM104General Electric IC200UAL004General Electric IC200UAL005

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES5948-3UA23Siemens 6ES7144-5KD00-0BA0General Electric DS200SPCBG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric DS200SVIAG1AGeneral Electric IC200UAR028Siemens 6ES7143-5BF00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric DS200PLIBG1ASiemens 6ES7144-4FF01-0AB0Siemens 6ES5541-8AA11

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES5951-7LB21General Electric IC200CHS003General Electric IC200UDD112

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES7144-1GB31-0XB0General Electric IC200UAA007Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric DS200FCGDH1AGeneral Electric IC200UAL006General Electric DS200SLCCG2A

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

330904-00-05-05-01-00 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the assemblyRecord the complete 330904-00-05-05-01-00 designation and its installed location.
2Confirm the functionSenses target proximity without contact
3Check mechanical fitCheck the M8×1 receiving thread and case clearance.
4Review the interfaceUse the matching NSv system.
5Define supplied scopeList required mounting hardware and accessories separately from the main item.
6Record acceptanceRetain the installation measurements and the completed system checks.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
General ElectricIC200UDD120

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricDS200AAHAH1A

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricDS200SHVIG1A

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricDS200PTCTG1A

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricDS200PANAH1A

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricDS200FHVAG1A

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 330904-00-05-05-01-00 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

330904-00-05-05-01-00 FAQ

Is 330904-00-05-05-01-00 a metric armored probe?Yes. The selected construction has an M8×1 threaded case with armor. It belongs to the NSv transducer family, not a cable-only assembly.
What is the case length of 330904-00-05-05-01-00?The BB05 option specifies a 50 mm overall case. Its AA00 option gives zero unthreaded length; these two dimensions describe different parts of the case.
How much integral lead comes with 330904-00-05-05-01-00?The CC05 total-length selection is 0.5 m. Match the remaining extension length to the sensor electrical-length requirement.
Does 330904-00-05-05-01-00 have a protected coaxial connector?The DD01 connection includes a miniature ClickLoc coaxial connector with protector and standard cable.
Can 330904-00-05-05-01-00 be installed in a hazardous area under its 00 option?No hazardous-area approval is selected by 00. Do not substitute the approval of a similar-looking probe for the actual item marking.
What needs checking before fitting 330904-00-05-05-01-00 into an M8 port?Confirm an M8×1 thread, sufficient case engagement and the target clearance. A nominal M8 port with another pitch is not the specified mounting.
Does armor make 330904-00-05-05-01-00 compatible with every proximity sensor?No. Armor provides mechanical protection; it does not determine electrical compatibility. The probe still requires the appropriate NSv chain.
What can disturb the measurement from 330904-00-05-05-01-00?Nearby metal and unsuitable side or rear clearance can affect the probe response. Validate the mounting geometry before accepting the final gap.
How should the connector on 330904-00-05-05-01-00 be serviced?Keep the junction clean and dry and restore its supplied protector. Avoid loading the cable or connector while tightening the mechanical mounting.
What identifies a successful replacement of 330904-00-05-05-01-00?Confirm the same complete configuration, secure mounting, the required electrical gap and acceptable response through the matched system.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada 3300 XL NSv

Applications & Why Choose Nordwel

Application and maintenance planning for 330904-00-05-05-01-00 in the correctly matched installation.

Application areas

01Confined probe mountingSupports metric NSv mounting locations.
02Protected cable routingProvides integral armor for the installed lead.
03Gap maintenanceAllows controlled probe-gap verification.
04Configuration matchingPreserves the mechanical, cable and approval selections.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the complete ordering code, supplied scope and installation conditions before replacement.
Need help matching 330904-00-05-05-01-00 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp