other
Products
Siemens 6ES7193-7AA00-0AA0 TM-IM/EM60S screw-terminal module product views
Siemens 6ES7193-7AA00-0AA0 TM-IM/EM60S screw-terminal module product views
Siemens 6ES7193-7AA00-0AA0 TM-IM/EM60S screw-terminal module product views

Siemens 6ES7193-7AA00-0AA0 TM-IM/EM60S screw-terminal module

EMAIL SALES
Siemens ET 200iSP
6ES7193-7AA00-0AA0 — TM-IM/EM60S screw-terminal module

6ES7193-7AA00-0AA0 is the ET 200iSP TM-IM/EM60S screw-terminal base. It supports one interface module and one electronic-module position within the approved station arrangement.

SiemensET 200iSPScrew-terminal module
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7193-7AA00-0AA0 product profile
Product familyET 200iSP
Exact model6ES7193-7AA00-0AA0
Field connectionScrew terminals
Module arrangementOne interface + one electronic
Dimensions W × H × D60 × 190 × 52 mm
PROFIBUS socketOne 9-pole D-sub
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7193-7AA00-0AA0
6ES7193-7AA00-0AA0 configuration inquiry

Get a precise quote for 6ES7193-7AA00-0AA0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7193-7AA00-0AA0 functions and installation

The 6ES7193-7AA00-0AA0 terminal module combines the interface-module seat, process-wiring terminals and station bus connections. Its field-terminal assignment follows the fitted electronics, while the complete installation determines the applicable network and hazardous-area conditions.

Interface supportProvides the mechanical and terminal-base position for the station interface.
Field wiringTerminates sensor and actuator circuits for the fitted electronic module.
Station-bus continuityIntegrates the power and backplane-bus connections in the terminal assembly.
Rail bondingConnects operational interference-discharge paths to the mounting rail through a spring contact.

Installation and selection boundaries

  • This terminal base is not a processor or a complete I/O station.
  • The relay electronic-module arrangement requires its designated terminal base, not an assumed universal fit.
  • Any hazardous-area suitability depends on the approved station, enclosure, wiring and bonding arrangement.
Official product data

6ES7193-7AA00-0AA0 key specifications

Terminal-module type TM-IM/EM60S
Station family ET 200iSP
Module arrangement One interface module on the left; one supported electronic module on the right
Field connection Blue screw-type terminals
Bus connection hardware One 9-pole D-sub socket for PROFIBUS RS 485-IS
Prewiring Supported before fitting the electronic modules
Rail connection Spring contact provides operational interference-discharge and shield-bonding path
Dimensions W × H × D 60 × 190 × 52 mm

Siemens ET 200iSP Operating Instructions, A5E00247483-AK, November 2022, section 10.3; Catalog ST 70, 2021, pages 10/344–10/345.

Pre-order check 01

Installation environment

Prepare the matched station, conductor records and controlled installation of 6ES7193-7AA00-0AA0.

  • Make the station and affected field circuits safe before removing terminal-base wiring.
  • Identify the interface position, the electronic-module position and the screw-terminal circuit map.
  • Inspect rail retention, the spring contact, the connector and the field-conductor terminations.
  • Test the configured station interface and the affected electronic-module signals before operational handover.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Exact terminal module
Confirm 6ES7193-7AA00-0AA0 and its screw-terminal arrangement.
Population
Use one interface module and the permitted electronic module in their intended left/right positions.
Network circuit
Match the actual interface and RS 485-IS connection arrangement; connector presence does not define a protocol.
Field assignment
Preserve the electronic-module terminal map and conductor preparation.
Installation approval
Retain the approved enclosure, equipotential bonding and hazardous-area conditions.
Match the screw-terminal version, supported module positions, circuit map and approved station installation; define electronics and connectors separately.
Recommended model families

More Siemens models

SiemensSiemens 6ES7193-7AA10-0AA0Siemens 6ES7144-4FF01-0AB0Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-1GB31-0XB0Siemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6GK1143-0AA01Siemens 6ES5951-7LB21Siemens 6ES5948-3UA23

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

General ElectricGeneral Electric IC600CB504General Electric IC600CB507General Electric IC600CB513

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB V18345-1010261001ABB 3HAC061275-001ABB PM5132-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM5112-R-ETHABB PM5072-T-ETHABB PM5072-R-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB IM60ABB SDCS-UCM-1-COAT 3ADT220090R0008ABB IIMKM02A

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB DO525ABB CM576-PNIOABB DI525

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7193-7AA00-0AA0 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the exact itemConfirm 6ES7193-7AA00-0AA0 and its hardware markings against the installed component.
2Check the module arrangementRecord the fitted modules, their positions and the required terminal-base relationship.
3Retain the circuit drawingPreserve wire labels, bus connections and the accepted terminal assignment before work.
4Agree supplied scopeList the terminal base, any separately required electronics, connectors and quantity explicitly.
5Prepare the installationPlan isolation, mounting and conductor checks for the actual station and process conditions.
6Verify before handoverInspect the restored connections, run the agreed signal or network checks and record acceptance.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6ES7143-5BF00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4PF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5948-3UA13

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5945-7UA23

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5941-7UA12

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 6ES7193-7AA00-0AA0 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7193-7AA00-0AA0 FAQ

What occupies the two sides of 6ES7193-7AA00-0AA0?The left side supports the interface module and the right side supports a permitted electronic module. It is an interface-plus-electronics terminal arrangement, not a base for two redundant interfaces.
Does 6ES7193-7AA00-0AA0 use screw or spring field terminals?This TM-IM/EM60S version uses screw-type field terminals. Match the conductor preparation and termination procedure to that mechanism rather than applying instructions for a spring-loaded base.
What is the D-sub connector on 6ES7193-7AA00-0AA0 intended for?It is a 9-pole socket for the PROFIBUS RS 485-IS connection arrangement. It is not an Ethernet port, and the fitted interface module determines which network connections are actually used.
Can 6ES7193-7AA00-0AA0 be wired before fitting electronics?Yes. The terminal module supports prewiring. Keep the intended module position and field-terminal assignment identified so that the correct electronics can be fitted without changing the circuit map.
How is the PROFIBUS shield bonded through 6ES7193-7AA00-0AA0?The cable shield is operationally connected to equipotential bonding through the terminal-module spring contact and the mounting rail. Inspect that contact path and retain the approved station bonding arrangement.
Is 6ES7193-7AA00-0AA0 suitable for every ET 200iSP electronic module?No universal fit should be assumed. In particular, the relay electronic-module arrangement requires its designated terminal module. Check the actual supported module position and wiring function before selection.
Does 6ES7193-7AA00-0AA0 define the sensor input range?The fitted electronic module defines the sensor interface, measurement range and diagnostics. This terminal module provides the connection and mounting structure rather than an independent signal-conversion specification.
What does 6ES7193-7AA00-0AA0 measure in cabinet space?The terminal module is 60 mm wide, 190 mm high and 52 mm deep. Include the fitted modules, bus connector and wiring clearance when checking the complete panel arrangement.
Do blue terminals alone approve a 6ES7193-7AA00-0AA0 installation for an Ex area?No. The terminal version must be used within the approved system and its enclosure, circuit, bonding and area-classification conditions. A component appearance does not establish approval of the whole installation.
What should be included when ordering 6ES7193-7AA00-0AA0 for a repair?Identify the terminal base separately from the interface module, electronic module and bus connector. State which of those items are required so that a photograph of an assembled station is not mistaken for the agreed supplied scope.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens ET 200iSP

Applications & Why Choose Nordwel

Application and maintenance planning for 6ES7193-7AA00-0AA0 in the correctly matched installation.

Application areas

01ET 200iSP process stationsUse 6ES7193-7AA00-0AA0 as the interface-and-electronic-module terminal assembly.
02Screw-terminated field circuitsConnect the supported sensors and actuators using the fitted electronic module terminal map.
03Prewired panel assemblyPrepare the terminal wiring before the electronic modules are installed.
04Station-base refurbishmentRestore rail bonding, interface seating and the existing field-conductor arrangement during maintenance.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Match the screw-terminal version, supported module positions, circuit map and approved station installation; define electronics and connectors separately.
Need help matching 6ES7193-7AA00-0AA0 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp