other
Products
Vibro-Meter IOCN Mk2 rear rack-controller communications interface product views
Vibro-Meter IOCN Mk2 rear rack-controller communications interface product views
Vibro-Meter IOCN Mk2 rear rack-controller communications interface product views

Vibro-Meter IOCN Mk2 rear rack-controller communications interface

EMAIL SALES
Vibro-Meter VM600 Mk2
IOCN Mk2 — rear rack-controller communications interface

IOCN Mk2 is offered for matched VM600 Mk2 installations. It provides external system and fieldbus connections for the matched rack controller.

Vibro-MeterVM600 Mk2rear rack-controller communications in
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IOCN Mk2 product profile
Product familyVM600 Mk2
Exact modelIOCN Mk2
Installation positionRear of the system rack
Controller relationshipPaired rack-controller interface
External connectionsSystem Ethernet and fieldbus paths
Port conditionOne active connector per fieldbus port
  • Brand:

    Others
  • Item NO.:

    IOCN Mk2
IOCN Mk2 configuration inquiry

Get a precise quote for IOCN Mk2

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IOCN Mk2 functions and installation

Provides external system and fieldbus connections for the matched rack controller. Fit the rear interface with its approved front controller. Specify front controller, rear interface, cables and configuration work independently.

Application purposeProvides external system and fieldbus connections for the matched rack controller.
Connection arrangementFit the rear interface with its approved front controller.
Installation preparationRecord system-network and fieldbus port destinations independently.
Operational acceptanceProve required network status and receiving-system data after restoration.

Installation and selection boundaries

  • Verify the permitted system rack and any legacy I²C compatibility condition.
  • Use one active connector per configured fieldbus port.
  • Retain system-network and fieldbus destinations as separate connection records.
Official product data

IOCN Mk2 key specifications

Platform VM600 Mk2
Module role Rear controller communications interface
Assembly relationship Paired front and rear modules
System Ethernet interfaces 2, on the matched module arrangement
Fieldbus ports 2; one connector per port active at a time
Rack compatibility condition Approved system rack; legacy rack requires the specified I²C interface

Vibro-Meter VM600 product and system documentation.

Pre-order check 01

Installation environment

Prepare IOCN Mk2 against the accepted equipment drawing and maintenance procedure.

  • Place the affected rack communications under controlled maintenance conditions.
  • Record system-network and fieldbus port destinations independently.
  • Check the matched front module and actual rack/backplane compatibility.
  • Prove required network status and receiving-system data after restoration.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Matched controller
Fit the rear interface with its approved front controller.
Rack backplane
Verify the permitted system rack and any legacy I²C compatibility condition.
Fieldbus assignment
Use one active connector per configured fieldbus port.
Network separation
Retain system-network and fieldbus destinations as separate connection records.
Scope agreement
Specify front controller, rear interface, cables and configuration work independently.
Specify front controller, rear interface, cables and configuration work independently.
Recommended model families

More Vibro-Meter models

Vibro-MeterVibro-Meter TQ403 111-403-000-013 A1-B1-C036-D000-E100-F1-G098-H10Vibro-Meter VM600 RPS6U SIM-275D-24 200-582-200-013Vibro-Meter S3960 AC46286 144-201-000-222

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-MeterVibro-Meter TQ402 111-402-000-012 A1-B1-D000-E010-F0-G000-H05Vibro-Meter TQ402 111-402-000-012Vibro-Meter AF70982 111-412-000-012

Separate product references; inclusion does not establish compatibility or interchangeability.

Vibro-MeterVibro-Meter TQ402 111-402-000-013 S3960 A1-B1-C042-D000-E010-F0-G000Vibro-Meter CA134 144-134-000-612Vibro-Meter CA202 144-202-000-215

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Siemens / General ElectricSiemens 6ES7144-5KD00-0BA0General Electric IC600BF914General Electric IC600BF941

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently NevadaSiemens 6ES7143-5BF00-0BA0Bently Nevada 330854-080-25-05Bently Nevada 330903-00-07-10-01-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES7143-5AH00-0BA0General Electric IC600BF948General Electric IC600BF908

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently Nevada / General ElectricBently Nevada 330876-03-10-00-00Bently Nevada 330130-070-01-00General Electric IC600CB513

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / Bently Nevada / General ElectricSiemens 6ES7144-4FF01-0AB0Bently Nevada 330104-00-08-15-02-00General Electric IC600BF915

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / Siemens / Bently NevadaGeneral Electric IC600CB504Siemens 6GK5308-2FM10-2AA3Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric IC600BF942Siemens 6ES7144-1GB31-0XB0General Electric IC600BF830

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General Electric / Bently NevadaSiemens 6ES7144-1JB31-0XB0General Electric IC600BF940Bently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IOCN Mk2 Order Guide

Check the complete requested item against the actual installation before ordering.
1Retain the full identityRecord IOCN Mk2 with its complete hardware identification.
2Review the assemblyFit the rear interface with its approved front controller.
3Capture the operating configurationVerify the permitted system rack and any legacy I²C compatibility condition.
4Inspect the installationCheck the matched front module and actual rack/backplane compatibility.
5Define the order scopeSpecify front controller, rear interface, cables and configuration work independently.
6Prove the restored functionProve required network status and receiving-system data after restoration.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6ES7144-4PF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4JF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-4BF50-0AA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7142-6BH00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6GK1143-0TA02

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF923

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IOCN Mk2 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IOCN Mk2 FAQ

What does IOCN Mk2 contribute to the rack controller?It provides the rear signal and communications interface for the matched front controller. The pair supplies the configured rack-controller function.
Where is the rear controller interface installed?It is installed at the rear of the system rack behind the associated front controller in the approved module arrangement.
Can both connector types of one fieldbus port be used simultaneously?Only one connector can be used per fieldbus interface at a time. Keep the two port assignments consistent with the accepted configuration.
Does a network cable connected to IOCN Mk2 establish the fieldbus data map?No. The configured controller determines the data to share. Verify the required measurements and statuses at the receiving system.
What legacy-rack condition matters for the Mk2 controller pair?The permitted later legacy system rack must have the specified I²C interface. Verify the actual backplane compatibility before installation.
Can the rear interface be used as a standalone front controller?No. Its role is the rear interface of the matched module arrangement, not a self-contained front processing controller.
How should system Ethernet and fieldbus cables be recorded?Keep separate destination and port records for the system-network paths and external fieldbus paths before disconnecting them.
What determines the security and configuration state of the pair?The accepted front-controller configuration and rack-security arrangement determine the permitted operations; the rear connector panel alone does not.
Which communications checks should follow rear-interface replacement?Check system-network status and the required fieldbus data at the actual receiving equipment, using the approved port assignments.
What should the delivery scope for IOCN Mk2 distinguish?Distinguish rear interface, front controller and required network/fieldbus cables, with any configuration work agreed separately.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Vibro-Meter VM600 Mk2

Applications & Why Choose Nordwel

Application and maintenance planning for IOCN Mk2 in the correctly matched installation.

Application areas

01Rack data interfacesProvide rear connections for the accepted controller arrangement.
02Network maintenancePreserve distinct system and fieldbus port assignments.
03Generation compatibilityCheck the actual rack/backplane before installing Mk2 controller hardware.
04Communications acceptanceVerify required data at the receiving system after replacement.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Specify front controller, rear interface, cables and configuration work independently.
Need help matching IOCN Mk2 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp