other
Products
General Electric IC630CCM300 RS-422 data communications module product views
General Electric IC630CCM300 RS-422 data communications module product views
General Electric IC630CCM300 RS-422 data communications module product views

General Electric IC630CCM300 RS-422 data communications module

EMAIL SALES
General Electric Series Three
IC630CCM300 — RS-422 data communications module

IC630CCM300 is a Series Three RS-422 data communications module. Match its installed function, connections and required accessories before planning a controlled replacement.

General ElectricSeries ThreeData communications module
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC630CCM300 product profile
Product familySeries Three
Exact modelIC630CCM300
CPU connection25-pin male D-type
Communication pathRS-422 serial link
Link controlON-LINE / OFF-LINE
Power arrangementInternal / external selection
  • Brand:

    General Electric
  • Item NO.:

    IC630CCM300
IC630CCM300 configuration inquiry

Get a precise quote for IC630CCM300

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC630CCM300 functions and installation

IC630CCM300 is a Series Three RS-422 data communications module. Match the actual revision, connection arrangement and intended function before replacement.

Installed functionConnects the CPU to serial communication.
System integrationWorks within the matched Series Three installation and its accepted application.
Connection reviewCheck the actual connector assignment and retained cable or field wiring.
Return to serviceTest the intended signal or communication function under controlled operating conditions.

Installation and selection boundaries

  • Preserve the complete unit identity and readable revision markings in the replacement record.
  • Record the installed terminal and cable assignments before removal.
  • Validate the actual required operating function, not only a power-on indication.
Official product data

IC630CCM300 key specifications

Product family Series Three
Serial interface RS-422
CPU connection 25-pin male D-type
Communication connector 25-pin female D-type
External power selection 5 VDC ±5%, 0.5 A when EXT is selected; check actual supply arrangement
Selectable data rates 300, 1200, 9600, 19200 bit/s
Status indications PWR, DIAG and DATA
Link control ON-LINE/OFF-LINE switch

GEK-90477A, Series Three data-communications installation and operation.

Pre-order check 01

Installation environment

Plan the safe removal, connection checks and acceptance test for IC630CCM300.

  • Make the equipment served by IC630CCM300 safe and isolate the affected assembly before disturbing connections.
  • Mark the actual connector positions, field-circuit identities and retained settings.
  • Verify the actual supply arrangement, connector condition and connection assignments before energizing.
  • Check the intended operation with hazardous equipment inhibited before releasing normal service.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

System identity
Series Three installation; preserve the complete current unit code.
Required role
Connects the CPU to serial communication.
Mating hardware
Match the existing connector, cable or terminal arrangement before reuse.
Configuration record
Keep the actual wiring, circuit assignment and operational settings.
Acceptance boundary
Confirm the required operating behavior before returning the machine to service.
Confirm complete identity, actual connections, installed configuration and the required supply scope before energizing the assembly.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600BF908General Electric IC600BF914General Electric IC600BF915

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF923General Electric IC600BF940General Electric IC600BF941

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF942General Electric IC600BF948General Electric IC600CB504

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB507General Electric IC600CB513General Electric IC600CB516

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-5BF00-0BA0Siemens 6ES7144-5KD00-0BA0Siemens 6ES7144-4PF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-4JF00-0AB0Siemens 6ES7144-4FF01-0AB0Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-1GB31-0XB0Siemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB V18345-1010261001ABB 3HAC061275-001ABB PM5132-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC630CCM300 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the exact itemRecord IC630CCM300 and the readable hardware revision.
2Define the assemblyState the unit and required accessories without assuming a complete station.
3Record the connectionsProvide clear connector, terminal and installed-wiring photographs.
4Preserve the applicationKeep the accepted machine application and relevant configuration before service.
5Plan the changePrepare isolation, connection inspection and controlled startup with the responsible engineering team.
6Agree acceptanceSet the functional checks and supplied-scope confirmation required before handover.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Bently Nevada330854-080-25-05

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330854-080-24-05

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330130-070-01-00

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF830

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600CB525

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600CB536

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IC630CCM300 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC630CCM300 FAQ

Which serial interface does IC630CCM300 provide?The Series Three Data Communications Module provides an RS-422 serial communication interface. Match the connected device, cable wiring and port settings before bringing the link online.
How is the IC630CCM300 connection to the CPU arranged?The CPU interface uses a 25-pin male D-type connector. The external communication connection is a separate 25-pin female D-type; do not interchange cables merely because both have 25 positions.
When does IC630CCM300 need an external power source?The rear power-select switch determines internal or external operation. External operation requires 5 VDC within the specified tolerance at 0.5 A; internal operation also requires a suitable rack supply and sufficient remaining load capacity.
What do PWR, DIAG and DATA mean on IC630CCM300?PWR indicates the module power condition, DIAG indicates the power-up hardware diagnostic result, and DATA indicates communication transfer activity. Review all three rather than equating a power indication with a healthy data link.
Which data rates can be selected on IC630CCM300?The communication DIP-switch table provides 300, 1200, 9600 and 19200 bit/s selections. The selected rate and parity must agree with the other device on the serial link.
Why does the local programmer stop functioning when IC630CCM300 is online?The ON-LINE position enables the serial link to the CPU and the programmer is not functional in that state. Use the intended ON-LINE/OFF-LINE control arrangement when handing control between serial communication and local programming.
Can IC630CCM300 be mounted away from the processor rack?The installation procedure allows rack mounting or external mounting within about five feet of the CPU. Preserve the specified CPU connection arrangement and make connections with Series Three power off.
What must agree before an IC630CCM300 link is established?The CPU key switch must be in the required Run or Run 1 position and the module ON-LINE/OFF-LINE switch must be ON-LINE. A valid address, wiring and matching serial configuration are also necessary.
How is an IC630CCM300 loop-back test enabled?Use the designated communication configuration switch and the required special connector, with the ON-LINE/OFF-LINE switch in OFF-LINE. Keep the test arrangement separate from normal plant communication wiring.
What should be preserved when replacing IC630CCM300?Record the unit address, port DIP-switch settings, internal/external power selection and CPU cable arrangement. Restore these settings deliberately and verify both diagnostics and actual data exchange before handover.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series Three

Applications & Why Choose Nordwel

Application and maintenance planning for IC630CCM300 in the correctly matched installation.

Application areas

01Serial data exchangeUse IC630CCM300 for its documented interface role in the matched installation.
02Communication-path maintenanceRetain the correct cable destinations and connector arrangement during service.
03Station integrationMatch the local or remote station role and the accepted control-system arrangement.
04Link restoration testingVerify the required signal exchange with the actual connected equipment after replacement.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm complete identity, actual connections, installed configuration and the required supply scope before energizing the assembly.
Need help matching IC630CCM300 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp