other
Products
Siemens 6ES7193-4CA20-0AA0 screw terminal module product views
Siemens 6ES7193-4CA20-0AA0 screw terminal module product views
Siemens 6ES7193-4CA20-0AA0 screw terminal module product views

Siemens 6ES7193-4CA20-0AA0 screw terminal module

EMAIL SALES
Siemens ET 200S
6ES7193-4CA20-0AA0 — screw terminal module

6ES7193-4CA20-0AA0 is the Siemens TM-E15S24-A1 screw terminal module for ET 200S. The 15 mm module provides a 2 × 4 connection arrangement and AUX1 access for the matching electronic module.

SiemensET 200Sscrew terminal module
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7193-4CA20-0AA0 product profile
Product familyET 200S
Exact model6ES7193-4CA20-0AA0
Terminal designationTM-E15S24-A1
Module width15 mm
Connection layout2 × 4 with AUX1
Terminal technologyScrew-type
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7193-4CA20-0AA0
6ES7193-4CA20-0AA0 configuration inquiry

Get a precise quote for 6ES7193-4CA20-0AA0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7193-4CA20-0AA0 functions and installation

6ES7193-4CA20-0AA0 is the Siemens TM-E15S24-A1 screw terminal module for ET 200S. The 15 mm module provides a 2 × 4 connection arrangement and AUX1 access for the matching electronic module. Provides the terminal arrangement for the approved electronic module. AUX1 continues to the left-hand potential group and is accessible at A4 and A8.

Electronic-module mountingProvides the terminal arrangement for the approved electronic module.
AUX1 distributionAUX1 continues to the left-hand potential group and is accessible at A4 and A8.
Signal assignmentThe fitted electronic module determines the signal functions of the applicable numbered terminals.
Replacement planningMatch terminal technology, potential grouping and actual electronic-module requirements.

Installation and selection boundaries

  • Terminal designation: TM-E15S24-A1.
  • AUX1 access: A4 and A8.
  • The terminal module is not the active input/output conversion module.
Official product data

6ES7193-4CA20-0AA0 key specifications

Terminal designation TM-E15S24-A1
Width 15 mm
Terminal technology Screw-type
Connection layout 2 × 4 terminals with AUX1
AUX1 access A4 and A8

Source: Siemens ET 200S Terminal Modules manual A5E01120034-01; official usable-terminal-module table confirms the complete ordering-code mapping.

Pre-order check 01

Installation environment

Prepare the actual mounting and connections for 6ES7193-4CA20-0AA0 before installation.

  • Check mounting on the correct station rail and the required potential-group position.
  • Make the field wiring safe and preserve conductor identification before terminal transfer.
  • Verify screw-terminal preparation and the intended AUX1 potential at A4/A8.
  • Fit the correct electronic module and test the affected circuits before normal operation.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Electronic module
Use the approved terminal/electronic-module combination.
Terminal hardware
Match the screw-type TM-E15S24-A1 arrangement.
AUX1
Check the potential continued from the left-hand group.
Signal mapping
Establish each numbered terminal from the fitted electronic-module diagram.
Scope
The terminal module is not the active input/output conversion module.
Accept the replacement only after its complete identity, installation and required operating function have been checked.
Recommended model families

More Siemens models

SiemensSiemens 6ES7144-1JB31-0XB0Siemens 6ES7144-1GB31-0XB0Siemens 6GK5308-2FM10-2AA3

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-5AH00-0BA0Siemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6GK1143-0TA02Siemens 6GK1143-0AA01Siemens 6ES5951-7LB21

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5948-3UA23Siemens 6ES5948-3UA13Siemens 6ES5945-7UA23

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Bently NevadaBently Nevada 330851-01-000-020-10-00-00Bently Nevada 330879-03-00Bently Nevada 330851-02-000-040-10-00-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330180-X1-05 MOD 145004-75Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02Bently Nevada 129716-XXX-040-15 MOD 166797-0133Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF830General Electric IC600BF908General Electric IC600BF914

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF915General Electric IC600BF923General Electric IC600BF940

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF941General Electric IC600BF942General Electric IC600BF948

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB504General Electric IC600CB507General Electric IC600CB513

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB516General Electric IC600CB525General Electric IC600CB536

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7193-4CA20-0AA0 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the itemRecord 6ES7193-4CA20-0AA0 and the actual hardware revision before ordering.
2Record the installationUse the approved terminal/electronic-module combination.
3Check the mountingCheck mounting on the correct station rail and the required potential-group position.
4Plan connectionsMake the field wiring safe and preserve conductor identification before terminal transfer.
5Prepare the changeVerify screw-terminal preparation and the intended AUX1 potential at A4/A8.
6Accept the installationFit the correct electronic module and test the affected circuits before normal operation.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Bently Nevada330854-080-25-05

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330854-080-24-05

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330130-070-01-00

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330130-075-01-00

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330104-00-08-15-02-00

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330102-00-12-10-01-05

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 6ES7193-4CA20-0AA0 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7193-4CA20-0AA0 FAQ

Which terminal module is identified by 6ES7193-4CA20-0AA0?It is the TM-E15S24-A1 screw-terminal module. The complete ordering code distinguishes this construction from other terminal technologies and terminal arrangements.
What is the width of 6ES7193-4CA20-0AA0?The terminal-module width is 15 mm. Reserve the space required for the complete station, wiring and service access rather than treating that width as the whole installation envelope.
Where can AUX1 be connected on 6ES7193-4CA20-0AA0?AUX1 is accessible at A4 and A8. It is continued from the left-hand potential group, so the applied potential must be checked before any field conductor is connected.
Does 6ES7193-4CA20-0AA0 determine what terminals 1–3 and 5–7 do?The installed electronic module determines their specific signal assignments. Use that module's terminal diagram rather than assuming the same assignments for every electronic module that can be fitted.
Can 6ES7193-4CA20-0AA0 replace a spring-terminal module without a wiring review?Do not assume a direct wiring transfer. This is the screw-terminal construction, and the permitted conductor preparation and terminal arrangement must be checked for the actual replacement.
Does the A1 designation make 6ES7193-4CA20-0AA0 an analog input?No. The terminal designation describes terminal hardware and AUX1 arrangement. Active input or output function belongs to the fitted electronic module.
What height and depth should be allowed for 6ES7193-4CA20-0AA0?The screw-terminal module measures 132 mm in height and 43 mm in depth. These are the module dimensions; allow additional space for connected conductors, cable bends and access within the assembled station.
What should be photographed before removing 6ES7193-4CA20-0AA0?Record the complete label, the installed electronic module, wire markings and the position within the potential group. These details support an accurate transfer of the existing connections.
How should screw connections on 6ES7193-4CA20-0AA0 be accepted?Use the applicable conductor and tightening instructions, then check retention and ensure no stray strands bridge terminals. The electronic module's functional rating is not a tightening specification.
What completes commissioning of 6ES7193-4CA20-0AA0?Check the electronic module is correctly seated, verify the intended terminal and AUX1 assignments and test the affected field signals. A mechanically installed terminal module alone does not confirm the circuit function.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens ET 200S

Applications & Why Choose Nordwel

Application and maintenance planning for 6ES7193-4CA20-0AA0 in the correctly matched installation.

Application areas

01Electronic-module mountingProvides the terminal arrangement for the approved electronic module.
02AUX1 distributionAUX1 continues to the left-hand potential group and is accessible at A4 and A8.
03Planned maintenanceThe fitted electronic module determines the signal functions of the applicable numbered terminals.
04Controlled replacementMatch terminal technology, potential grouping and actual electronic-module requirements.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Accept the replacement only after its complete identity, installation and required operating function have been checked.
Need help matching 6ES7193-4CA20-0AA0 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp