other
Products
Bently Nevada 190501-21-00-01 piezoelectric velocity transducer product views
Bently Nevada 190501-21-00-01 piezoelectric velocity transducer product views
Bently Nevada 190501-21-00-01 piezoelectric velocity transducer product views

Bently Nevada 190501-21-00-01 piezoelectric velocity transducer

EMAIL SALES
Bently Nevada Velomitor CT
190501-21-00-01 — piezoelectric velocity transducer

190501-21-00-01 is a Bently Nevada Velomitor CT transducer for machinery-casing vibration velocity measurement. Its specified sensitivity and frequency response must be used with the correctly configured measurement and mounting arrangement.

Bently NevadaVelomitor CTpiezoelectric velocity transducer
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
190501-21-00-01 product profile
Product familyVelomitor CT
Exact model190501-21-00-01
Nominal sensitivity3.94 mV/(mm/s), ±5%
Frequency response3–900 Hz, ±1 dB
Operating temperature-40 to +85 °C
ConnectorMIL-C-5015
  • Brand:

    Bently Nevada
  • Item NO.:

    190501-21-00-01
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

190501-21-00-01 configuration inquiry

Get a precise quote for 190501-21-00-01

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

190501-21-00-01 functions and installation

190501-21-00-01 is a Bently Nevada Velomitor CT transducer for machinery-casing vibration velocity measurement. Its specified sensitivity and frequency response must be used with the correctly configured measurement and mounting arrangement. Converts machinery-case vibration into a velocity-related electrical signal. The 21 option uses the 3/8-24 to 1/2-14 NPT mounting adapter.

Casing vibration measurementConverts machinery-case vibration into a velocity-related electrical signal.
Mechanical couplingThe 21 option uses the 3/8-24 to 1/2-14 NPT mounting adapter.
Signal integrationMatch the measurement input and scale to the transducer sensitivity and actual connection.
Operating environmentCheck the installed transducer temperature and mechanical location before service.

Installation and selection boundaries

  • Nominal sensitivity: 3.94 mV/(mm/s), ±5%.
  • Connection: MIL-C-5015 connector option.
  • The 00 connection option is a connector version, not a supplied fixed-length integral cable.
Official product data

190501-21-00-01 key specifications

Nominal sensitivity 3.94 mV/(mm/s), ±5%
Frequency response, ±1 dB 3–900 Hz
Frequency response, ±3 dB 1.5–1000 Hz
Operating temperature -40 to +85 °C
Mounting adapter 3/8-24 to 1/2-14 NPT
Connection MIL-C-5015 connector option

Source: Bently Nevada 190501 Velomitor CT Transducer datasheet 141636 Rev. AF, specifications and ordering options.

Pre-order check 01

Installation environment

Prepare the actual mounting and connections for 190501-21-00-01 before installation.

  • Make the machine safe and verify the intended vibration measurement location.
  • Check the mounting adapter, contact surface and correct mechanical attachment.
  • Use the selected MIL-C-5015 connection and protect the cable route from strain.
  • Verify the measurement scale and plausible vibration response after installation.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Measurement
Use a suitable velocity-transducer input and matching scale.
Mechanical adapter
Match the 3/8-24 to 1/2-14 NPT adapter arrangement.
Temperature
Keep the operating transducer within -40 to +85 °C.
Frequency
Choose the relevant 3–900 Hz ±1 dB or 1.5–1000 Hz ±3 dB response specification.
Connection scope
The 00 connection option is a connector version, not a supplied fixed-length integral cable.
Accept the replacement only after its complete identity, installation and required operating function have been checked.
Recommended model families

More Bently Nevada models

Bently NevadaBently Nevada 330851-02-000-080-90-01-05Bently Nevada 24701-28-05-XX-014-04-XX MOD 323933-40-02Bently Nevada 24701-28-05-XX-025-04-XX MOD 323933-30-02

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 129716-XXX-040-15 MOD 166797-0133Bently Nevada 24701-28-05-XX-104-03-XX MOD 323933-00-02Bently Nevada 330854-080-25-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00Bently Nevada 330130-075-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05Bently Nevada 330103-02-04-10-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

SiemensSiemens 6ES7144-5KD00-0BA0Siemens 6ES7144-4PF00-0AB0Siemens 6ES7144-4JF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-4FF01-0AB0Siemens 6ES7144-1JB31-0XB0Siemens 6ES7144-1GB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0Siemens 6ES7143-4BF50-0AA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02Siemens 6GK1143-0AA01

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5951-7LB21Siemens 6ES5948-3UA23Siemens 6ES5948-3UA13

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5945-7UA23Siemens 6ES5941-7UA12Siemens 6ES5921-3WB12

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5541-8AA11Siemens 6ES5470-4UC13Siemens 6ES5465-4UA13

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES5464-8MF21Siemens 6ES5464-8ME11General Electric IC600BF830

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

190501-21-00-01 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the itemRecord 190501-21-00-01 and the actual hardware revision before ordering.
2Record the installationUse a suitable velocity-transducer input and matching scale.
3Check the mountingMake the machine safe and verify the intended vibration measurement location.
4Plan connectionsCheck the mounting adapter, contact surface and correct mechanical attachment.
5Prepare the changeUse the selected MIL-C-5015 connection and protect the cable route from strain.
6Accept the installationVerify the measurement scale and plausible vibration response after installation.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Bently Nevada330103-02-08-10-02-CN

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330905-00-25-05-02-CN

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330903-00-07-10-01-CN

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330903-00-07-10-01-00

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330876-03-10-00-00

A separate product reference; verify its own installation and configuration.

Specialist model
Bently Nevada330906-02-12-10-02-05

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 190501-21-00-01 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

190501-21-00-01 FAQ

What quantity does 190501-21-00-01 measure?It measures machinery-casing vibration velocity. It is not an eddy-current shaft-displacement probe, so the measurement location and input scaling must suit a velocity transducer.
What sensitivity should be used when scaling 190501-21-00-01?The nominal sensitivity is 3.94 mV per mm/s, equivalent to 100 mV per inch/s, with ±5% sensitivity tolerance. Configure the receiving channel using the correct units.
What frequency range is specified for 190501-21-00-01?The range is 3–900 Hz at ±1 dB, or 1.5–1000 Hz at ±3 dB. State the corresponding amplitude tolerance whenever using either frequency-range figure.
Which mounting adapter is selected on 190501-21-00-01?The 21 option specifies a 3/8-24 to 1/2-14 NPT adapter. Confirm the machine mounting and required mechanical coupling before installation.
Does 190501-21-00-01 include a fixed-length attached cable?The 00 option identifies the MIL-C-5015 connector arrangement. It should not be described as an integral cable version or as including a particular cable length without a separate supplied-scope check.
What operating temperature applies to 190501-21-00-01?The current datasheet lists -40 to +85 °C operation. Storage or other approval-condition temperatures must not be substituted for that operating range.
Can 190501-21-00-01 be installed at any convenient point on the machine?Select a location that gives the intended casing-vibration measurement and reliable mechanical coupling. Accessibility alone does not establish that a location represents the required vibration condition.
What should be checked if the 190501-21-00-01 reading appears incorrectly scaled?Verify the receiving channel's units and sensitivity setting, the actual connection and the selected measurement type. A velocity signal must not be interpreted using a displacement or acceleration scale.
How should the cable connected to 190501-21-00-01 be protected?Use a suitable matching connection, provide support and avoid mechanical strain or an unsuitable cable route. The connector option alone does not establish compatibility with every cable or monitoring input.
What should be verified after replacing 190501-21-00-01?Check secure mounting, correct connection, receiving-channel scale and a plausible response under controlled machinery conditions. Preserve the accepted configuration and measurement location in the maintenance record.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada Velomitor CT

Applications & Why Choose Nordwel

Application and maintenance planning for 190501-21-00-01 in the correctly matched installation.

Application areas

01Casing vibration measurementConverts machinery-case vibration into a velocity-related electrical signal.
02Mechanical couplingThe 21 option uses the 3/8-24 to 1/2-14 NPT mounting adapter.
03Planned maintenanceMatch the measurement input and scale to the transducer sensitivity and actual connection.
04Controlled replacementCheck the installed transducer temperature and mechanical location before service.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Accept the replacement only after its complete identity, installation and required operating function have been checked.
Need help matching 190501-21-00-01 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp