other
Products
Siemens 6ES7288-0CD10-0AA0 PM207 24 VDC 3 A regulated power supply product photographs
Siemens 6ES7288-0CD10-0AA0 PM207 24 VDC 3 A regulated power supply product photographs
Siemens 6ES7288-0CD10-0AA0 PM207 24 VDC 3 A regulated power supply product photographs

Siemens 6ES7288-0CD10-0AA0 PM207 24 VDC 3 A regulated power supply

EMAIL SALES
Siemens PM207
6ES7288-0CD10-0AA0 — PM207 24 VDC 3 A regulated power supply

Provides a regulated 24 VDC output rated at 3 A for control equipment. The compact enclosure mounts on a 35 mm DIN rail inside the installation.

SiemensPM207Regulated power supply
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
6ES7288-0CD10-0AA0 product profile
Product familyPM207
Exact model6ES7288-0CD10-0AA0
Rated output24 VDC / 3 A
Output adjustment22.8–26.4 VDC
Mounting35 mm DIN rail
Protection degreeIP20
  • Brand:

    SIEMENS
  • Item NO.:

    6ES7288-0CD10-0AA0
6ES7288-0CD10-0AA0 configuration inquiry

Get a precise quote for 6ES7288-0CD10-0AA0

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

6ES7288-0CD10-0AA0 functions and installation

Use the supply capacity and terminal arrangement to plan the control-power circuit. Match the incoming source, connected loads and protective devices before replacing the installed power supply.

Load allocationAdd the connected continuous loads before selecting the supply.
Input coordinationCompare the incoming supply with the supported voltage range.
Panel installationReserve rail space, cable access and suitable enclosure protection.
Acceptance testingVerify output polarity and voltage before reconnecting sensitive loads.

Installation and selection boundaries

  • Rated output current is 3 A; the larger-current variants have different ordering codes.
  • Electronic short-circuit protection does not replace the installation’s wiring and protection design.
  • Record the output adjustment and connected-load schedule before replacement.
Official product data

6ES7288-0CD10-0AA0 key specifications

Rated AC input 120 / 230 VAC, 50 / 60 Hz
Permitted input range 85–264 VAC or 88–370 VDC
Rated output voltage and current 24 VDC / 3 A
Output voltage setting range 22.8–26.4 VDC
Approximate rated efficiency 89%
Dimensions, W × H × D 45 × 100 × 81 mm
Weight 0.46 kg
Protection degree IP20
Mounting method 35 mm DIN rail

Siemens S7-200 SMART product catalogue, power-module technical specifications, page 24; PM207 3 A column.

Pre-order check 01

Installation environment

Prepare an enclosed control-power installation with access to the terminals and rail latch.

  • Isolate and verify the incoming supply before connecting or removing conductors.
  • Mount securely on a 35 mm DIN rail and maintain access for wiring and maintenance.
  • Use an enclosure appropriate to the site; IP20 is not a weatherproof installation rating.
  • Check polarity and the adjusted DC voltage before loading the circuit, then test the installation under its intended operating load.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Supply source
Confirm the actual input falls within the specified AC or DC input range.
Load budget
Keep the connected load within the applicable supply capacity and account for the equipment’s startup requirements.
Output setting
Match the selected DC voltage to every connected device; the setting range is not an acceptable range for all loads.
Mechanical fit
Compare the 45 × 100 × 81 mm outline with available rail space and cable access.
Circuit protection
Coordinate upstream protection and conductor sizing with the installation design; do not rely solely on internal short-circuit protection.
Confirm the complete ordering code, incoming supply, load budget and output setting together before energizing the replacement.
Recommended model families

More Siemens models

SiemensSiemens 6ES7143-5BF00-0BA0Siemens 6ES7144-5KD00-0BA0Siemens 6ES7144-4PF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-4JF00-0AB0Siemens 6ES7144-4FF01-0AB0Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-1GB31-0XB0Siemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Bently NevadaBently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

vibro-meter / ABBvibro-meter VM600 RPS6U SIM-275D-24 200-582-200-013 DCABB V18345-1010261001ABB 3HAC061275-001

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM5132-T-ETHABB PM5112-R-ETHABB PM5072-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

HoneywellHoneywell CC-ZHR041Honeywell MEL-BSSRTHoneywell MEL-BSSRT-CC

Separate product references; inclusion does not establish compatibility or interchangeability.

HoneywellHoneywell MLF-AH04AHoneywell MLF-DC04CHoneywell MLF-DV04A

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

6ES7288-0CD10-0AA0 Order Guide

Check the complete requested item against the actual installation before ordering.
1Confirm the supply identityMatch the full ordering code and installed nameplate.
2Record incoming powerDocument the actual source type and voltage.
3Total the loadsReview continuous demand and equipment startup behavior.
4Check enclosure fitConfirm rail space, protection and terminal access.
5Plan the wiringRecord polarity, conductor assignments and protective devices.
6Agree acceptanceCheck the unloaded voltage and controlled loaded operation.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
Siemens6GK1143-0AA01

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5951-7LB21

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5948-3UA23

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5948-3UA13

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5945-7UA23

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES5941-7UA12

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 6ES7288-0CD10-0AA0 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

6ES7288-0CD10-0AA0 FAQ

What current is available from 6ES7288-0CD10-0AA0?The rated output is 3 A at 24 VDC. Add the actual connected loads and review their startup demand before choosing the supply; a nominal voltage match alone is insufficient.
Can this supply accept DC input as well as AC?Yes. The catalogue specifies 85–264 VAC or 88–370 VDC for the 3 A version. Identify the real source and use the appropriate terminal and protection arrangement before connection.
Is the output fixed at exactly 24 V?The nominal output is 24 VDC, with a setting range of 22.8–26.4 VDC. Adjust it to suit the connected equipment and verify the measured value before reconnecting sensitive loads.
How much space does the PM207 enclosure occupy?Its specified dimensions are 45 mm wide, 100 mm high and 81 mm deep. Allow additional practical access for conductor routing, terminal work and removal from the rail.
Which mounting rail is used?The catalogue specifies a 35 mm DIN rail. Check that the rail is secure and that the installed latch holds the supply firmly before wiring the circuit.
Does IP20 permit installation outdoors without a cabinet?No. IP20 does not provide weatherproof protection. Use a suitable enclosure for moisture, dust and access conditions at the installation.
Does electronic short-circuit protection eliminate the need for circuit protection?No. The supply includes electronic short-circuit protection, but upstream protection, conductor sizing and protection of the outgoing circuits still require an installation-specific design.
What input frequency is specified for an AC installation?The rated line frequency is 50 or 60 Hz. Check the source voltage as well as frequency, and do not apply the DC input limits as AC operating limits.
Can 89% efficiency be assumed at every operating point?No. The catalogue gives approximately 89% at the rated condition. It is not a guarantee for every input voltage or load, so assess enclosure heat management for the real installation.
What should be checked before reconnecting an existing load bank?Verify isolation, conductor assignment, DC polarity and the output adjustment first. Then reconnect in a controlled sequence and confirm stable operation with the intended load rather than judging the supply only from an unloaded measurement.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Siemens PM207

Applications & Why Choose Nordwel

Application and maintenance planning for 6ES7288-0CD10-0AA0 in the correctly matched installation.

Application areas

01Control-power distributionSupply suitable 24 VDC devices within the verified load budget.
02Compact machine panelsUse the narrow rail-mounted enclosure where the installation provides suitable protection.
03Power-supply replacementCompare source, output setting and physical fit before changing the unit.
04Commissioning checksMeasure the DC output and confirm the connected devices start correctly.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the complete ordering code, incoming supply, load budget and output setting together before energizing the replacement.
Need help matching 6ES7288-0CD10-0AA0 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp