other
Products
Bently Nevada 330101-00-32-10-01-00 non-armored 3/8-24 proximity probe product photographs
Bently Nevada 330101-00-32-10-01-00 non-armored 3/8-24 proximity probe product photographs
Bently Nevada 330101-00-32-10-01-00 non-armored 3/8-24 proximity probe product photographs

Bently Nevada 330101-00-32-10-01-00 non-armored 3/8-24 proximity probe

EMAIL SALES
Bently Nevada 3300 XL 8 mm
330101-00-32-10-01-00 — non-armored 3/8-24 proximity probe

Combines a 3/8-24 UNF case with a 1.0 m standard lead. The supplied connector protector helps protect the junction in the correctly matched 8 mm measurement system.

Bently Nevada3300 XL 8 mmnon-armored 3/8-24 proximity probe
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
330101-00-32-10-01-00 product profile
Product family3300 XL 8 mm
Exact model330101-00-32-10-01-00
Case thread3/8-24 UNF
Overall case3.2 in
Unthreaded section0.0 in
Probe total length1.0 m
  • Brand:

    Bently Nevada
  • Item NO.:

    330101-00-32-10-01-0
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

330101-00-32-10-01-00 configuration inquiry

Get a precise quote for 330101-00-32-10-01-00

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

330101-00-32-10-01-00 functions and installation

330101-00-32-10-01-00 uses a non-armored 8 mm probe construction. The case length is 3.2 inches.

SensingMeasures target proximity without contact
Threaded fitFits the specified 3/8-24 UNF port
Connection protectionIncludes the connector protector
System matchingUses an 8 mm transducer chain

Installation and selection boundaries

  • Uses a non-armored 8 mm probe construction
  • The case length is 3.2 inches
  • The standard lead totals 1.0 m
Official product data

330101-00-32-10-01-00 key specifications

Probe family 3300 XL 8 mm
Armor None
Case thread 3/8-24 UNF
Unthreaded length 0.0 in
Case length 3.2 in
Total length 1.0 m
Connector and cable ClickLoc with protector; standard cable
Approval option 00; not intended for hazardous-area installation

Bently Nevada technical data: 141194; ordering tables and applicable installation notes.

Pre-order check 01

Installation environment

Check access, mechanical support and environmental conditions before fitting this item.

  • Verify the 3/8-24 UNF mounting and full case clearance.
  • Arrange a suitable target area without side or rear interference.
  • Install the supplied connector protection without loading the lead.
  • Adjust and verify the electrical gap through the matched sensor.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Family
Match the 3300 XL 8 mm measurement chain.
Electrical length
Account for the 1.0 m probe when choosing the extension.
Mechanical identity
Retain the 3.2-inch case and zero unthreaded selection.
Connection
Use the specified ClickLoc junction and protector.
Location
The 00 approval option is not a hazardous-area approval.
Confirm the complete ordering code, supplied scope and installation conditions before replacement.
Recommended model families

More Bently Nevada models

Bently NevadaBently Nevada 330130-070-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330130-075-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330879-03-00Bently Nevada 330854-080-25-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330902-00-95-05-02-05Bently Nevada 330903-00-07-10-01-CNBently Nevada 330851-02-000-040-10-00-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330180-X1-05Bently Nevada 330102-00-12-10-01-05Bently Nevada 330903-00-07-10-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

SiemensSiemens 6ES5921-3WB12Siemens 6ES7144-4FF01-0AB0Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES7143-5BF00-0BA0General Electric IC200UDD120Siemens 6ES7144-5KD00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5945-7UA23Siemens 6ES5941-7UA12Siemens 6GK1143-0TA02

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric DS200SPCBG1AGeneral Electric IC200UDD112Siemens 6GK1143-0AA01

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric DS200FHVAG1AGeneral Electric DS200AAHAH1AGeneral Electric DS200PLIBG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric IC200BEM104Siemens 6ES5948-3UA23Siemens 6ES7144-4PF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES5541-8AA11Siemens 6GK5308-2FM10-2AA3General Electric DS200PTCTG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric IC200UAL004Siemens 6ES7144-1GB31-0XB0General Electric DS200EXPSG1ABB

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

330101-00-32-10-01-00 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the assemblyRecord the complete 330101-00-32-10-01-00 designation and its installed location.
2Confirm the functionMeasures target proximity without contact
3Check mechanical fitVerify the 3/8-24 UNF mounting and full case clearance.
4Review the interfaceMatch the 3300 XL 8 mm measurement chain.
5Define supplied scopeList required mounting hardware and accessories separately from the main item.
6Record acceptanceRetain the installation measurements and the completed system checks.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
General ElectricIC200CHS003

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC200UAA007

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC200UAL005

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC200UAL006

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC200UAR028

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricDS200SVIAG1A

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 330101-00-32-10-01-00 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

330101-00-32-10-01-00 FAQ

How much unthreaded case is selected on 330101-00-32-10-01-00?The AA00 selection specifies zero unthreaded length. It must not be read as zero overall case length; the BB32 case is 3.2 inches.
Does 330101-00-32-10-01-00 carry a hazardous-location approval?The EE00 option means no hazardous-area approval is selected. Do not claim approved hazardous-area use from the general product family.
What does the connector option add to 330101-00-32-10-01-00?DD01 includes a miniature coaxial ClickLoc connector and its protector with standard cable. Keep that protector in the planned connection scope.
Which mounting thread is used by 330101-00-32-10-01-00?Its case uses 3/8-24 UNF. Verify the receiving port rather than assuming an M10 mounting is equivalent.
Is the lead of 330101-00-32-10-01-00 armored?No integral armor is selected for this probe type. Protect the lead along its actual installed route.
How is the 1 m length of 330101-00-32-10-01-00 used in system selection?The probe length forms part of the total electrical length. Choose the matching extension and sensor arrangement, not an arbitrary longer cable to reach the cabinet.
Why should 330101-00-32-10-01-00 not be accepted from thread fit alone?Thread fit does not prove suitable target geometry or a correct electrical chain. Check the target, the complete system family and the operating gap.
What casing clearance is needed for 330101-00-32-10-01-00?Allow for its 3.2-inch overall case and the mounting/locking arrangement. Maintain the probe clearances required by the 8 mm system installation.
Can the measurement gap of 330101-00-32-10-01-00 be set by counting turns?Use the matched transducer signal to set and verify the gap. Thread turns can assist positioning but do not replace an electrical measurement.
What should be inspected after reconnecting 330101-00-32-10-01-00?Inspect the coaxial joint and protector, confirm the cable is not under strain, then verify the gap indication and stable measurement response.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada 3300 XL 8 mm

Applications & Why Choose Nordwel

Application and maintenance planning for 330101-00-32-10-01-00 in the correctly matched installation.

Application areas

01Rotating-machine monitoringProvides the probe element of a matched 8 mm system.
02Defined threaded mountingSupports a 3/8-24 UNF installation.
03Protected junction maintenanceKeeps the selected connector protector in service.
04Controlled spare selectionMatches case geometry and electrical length before replacement.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the complete ordering code, supplied scope and installation conditions before replacement.
Need help matching 330101-00-32-10-01-00 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp