other
Products
General Electric IC600YB801 Remote I/O receiver circuit board product views
General Electric IC600YB801 Remote I/O receiver circuit board product views
General Electric IC600YB801 Remote I/O receiver circuit board product views

General Electric IC600YB801 Remote I/O receiver circuit board

EMAIL SALES
General Electric Series Six
IC600YB801 — Remote I/O receiver circuit board

Restore the receiver side of a supported Series Six remote-I/O link with the correctly identified circuit board. Match the installed revision, link wiring and faceplate scope before planning the exchange.

General ElectricSeries SixRemote I/O receiver circuit board
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC600YB801 product profile
Product familySeries Six
Exact modelIC600YB801
Supply formReceiver circuit board
Installed roleRemote I/O station receiver
Direct linkTwisted-pair connection
Faceplate scopeSeparate ordering item
  • Brand:

    General Electric
  • Item NO.:

    IC600YB801
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

IC600YB801 configuration inquiry

Get a precise quote for IC600YB801

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC600YB801 functions and installation

IC600YB801 is the circuit-board ordering form of the remote I/O receiver. The original manual distinguishes the board from the separate faceplate and from the complete board-and-faceplate assembly; link configuration and failure-response features require a revision-aware review.

Remote station receptionReceives the configured remote-I/O link at the field station.
Link wiringMatch twisted-pair or supported modem connection details.
Board-level replacementAgree board and separate faceplate requirements.
Revision-dependent responsePreserve only the failure-response behavior supported by the installed revision.

Installation and selection boundaries

  • Treat board-only supply and a complete faced assembly as different ordering scopes.
  • The driver status-byte allocation is not a receiver channel-count specification.
  • Communication-failure and hold-state functions must be checked against the fitted revision.
Official product data

IC600YB801 key specifications

Board role Remote I/O receiver
Ordering form Circuit board; faceplate specified separately
Direct communication path Twisted pair under the manual cable specification
Documented twisted-pair span Up to 10,000 ft / 3 km with the specified cable arrangement
Modem interface RS-232-C
Local modem-cable span Up to 50 ft / 15 m under the specified arrangement
Failure-response settings Verify supported behavior against the fitted board revision

GEK-83537 Remote I/O Modules, April 1987, in the approved GEK-25367E original-manual archive.

Pre-order check 01

Installation environment

Prepare the fitted Series Six installation for a controlled exchange.

  • Secure remote outputs and isolate the affected rack and field supplies before board exchange.
  • Record receiver revision, link connectors, cable shielding and any jumper positions.
  • Use the correct insertion/extraction procedure and retain the intended faceplate and mounting hardware.
  • Verify link communication, remote-rack diagnostics and the required output response before release.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Remote-I/O role
Match the receiver position and configured Series Six remote station.
Board revision
Check the installed revision before retaining failure-response options.
Link medium
Match the engineered twisted-pair or modem wiring and applicable cable limits.
Fault response
Validate the required remote-output behavior under controlled communication-failure tests.
Supply scope
Agree the circuit board and any separately required faceplate or hardware.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600BF940General Electric IC600BF941General Electric IC600BF942

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF948General Electric IC600CB504General Electric IC600CB507

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB513General Electric IC600CB516General Electric IC600CB525

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB536General Electric IC600CB537General Electric IC600BF830

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

ABBABB PM5112-R-ETHABB PM5072-T-ETHABB PM5072-R-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB IM60ABB SDCS-UCM-1-COAT 3ADT220090R0008ABB IIMKM02A

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB DO525ABB CM576-PNIOABB DI525

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330854-080-25-05Bently Nevada 330854-080-24-05Bently Nevada 330130-070-01-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-5BF00-0BA0Siemens 6ES7144-5KD00-0BA0Siemens 6ES7144-4PF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC600YB801 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the itemRetain IC600YB801 and the fitted revision when agreeing the replacement.
2Match the installed roleMatch the receiver position and configured Series Six remote station.
3Record connectionsRecord receiver revision, link connectors, cable shielding and any jumper positions.
4Review operating limitsTreat board-only supply and a complete faced assembly as different ordering scopes.
5Agree the supplied scopeAgree the circuit board and any separately required faceplate or hardware.
6Validate restorationVerify link communication, remote-rack diagnostics and the required output response before release.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
General ElectricIC600BF908

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF914

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF915

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF923

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4JF00-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-4FF01-0AB0

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IC600YB801 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC600YB801 FAQ

Does IC600YB801 include a faceplate as part of its board reference?The ordering table identifies it as the circuit-board form. Specify the separate faceplate or a complete assembly explicitly when those items are required.
What function does this board perform in the remote station?It is the remote I/O receiver on the field-station side of the Series Six link. Match that receiver role rather than treating it as a local processor or link driver.
How far can the documented twisted-pair receiver link extend?The manual permits up to 10,000 ft, approximately 3 km, with the specified twisted-pair cable and connection arrangement. The distance is conditional on that engineered link design.
What limit applies to a local RS-232-C modem cable?The documented distance from the receiver or driver to its associated modem is up to 50 ft, approximately 15 m. That local cable limit is not the total reach of a modem-based system.
Can hold-last-state behavior be assumed for every receiver revision?No. The manual ties certain communication-failure and hold-state functions to specific board revisions. Confirm the fitted revision and validate the required remote-output response.
Does the driver status byte describe eight receiver I/O channels?No. The status-byte allocation belongs to the remote driver diagnostics. It must not be relabelled as the receiver board channel count.
Which settings should be recorded before removing the receiver board?Record fitted revision, link wiring, shielding, addressing and relevant jumper positions. Preserve the existing remote-station configuration so a board exchange does not introduce a separate setup change.
What hardware needs to be considered for a board-only replacement?Confirm the retained faceplate, connectors, mounting hardware and compatible board arrangement. A board reference alone does not define a complete faced module supply.
How should a lost remote link be investigated after replacement?Check the receiver and driver identities, physical link wiring and retained configuration. Review the remote-rack and link indications before changing the application addressing.
Which functional test matters before remote outputs return to service?Validate normal remote-I/O communication and the required response to a controlled link fault. Secure the process and confirm the configured output behavior under the site acceptance procedure.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series Six

Applications & Why Choose Nordwel

Application and maintenance planning for IC600YB801 in the correctly matched installation.

Application areas

01Remote station maintenanceRestore the receiver circuit in an existing Series Six remote-I/O link.
02Board-level sparesAgree the separate board, faceplate and hardware requirements.
03Link fault diagnosisSeparate cable and configuration faults from remote-rack errors.
04Failure-response validationTest the supported output response for the fitted board revision.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Need help matching IC600YB801 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp