other
Products
Bently Nevada 200151-40-03-02 4 m armored accelerometer interface cable product photographs
Bently Nevada 200151-40-03-02 4 m armored accelerometer interface cable product photographs
Bently Nevada 200151-40-03-02 4 m armored accelerometer interface cable product photographs

Bently Nevada 200151-40-03-02 4 m armored accelerometer interface cable

EMAIL SALES
Bently Nevada Accelerometer interface cables
200151-40-03-02 — 4 m armored accelerometer interface cable

Connects the accelerometer interface through a 4.0 m blue armored lead. The selected version has connectors at both ends and nylon coupling nuts.

Bently NevadaAccelerometer interface cables4 m armored accelerometer interface cable
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
200151-40-03-02 product profile
Product familyAccelerometer interface cables
Exact model200151-40-03-02
Cable length4.0 m
ArmorBlue cable with armor
ConnectionsConnectors on both ends
Coupling nutNylon
  • Brand:

    Bently Nevada
  • Item NO.:

    200151-40-03-02
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

200151-40-03-02 configuration inquiry

Get a precise quote for 200151-40-03-02

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

200151-40-03-02 functions and installation

200151-40-03-02 provides an accelerometer interface cable. The 40 length option is 4.0 m.

Signal routeConnects the accelerometer interface
Mechanical protectionBlue armored cable construction
End arrangementTerminated at both ends
Coupling selectionNylon coupling nut option

Installation and selection boundaries

  • Provides an accelerometer interface cable
  • The 40 length option is 4.0 m
  • The 03 construction is blue armored cable
Official product data

200151-40-03-02 key specifications

Cable function Accelerometer interface
Length 4.0 m
Cable construction Blue cable with armor
Connector arrangement Both ends terminated
Coupling nut option 02 nylon

Bently Nevada technical data: 164986; ordering tables and applicable installation notes.

Pre-order check 01

Installation environment

Check access, mechanical support and environmental conditions before fitting this item.

  • Plan the complete 4.0 m route without pulling on either connector.
  • Check the mating connector geometry and coupling engagement.
  • Protect the armored cable at entries and support the installed route.
  • Verify the completed connection and measurement-chain response before use.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Product type
This item is a cable, not an accelerometer.
Mating ends
Confirm both connector interfaces against the installed equipment.
Routing length
The selected lead is 4.0 m; do not assume another length from a photograph.
Coupling
Use the specified nylon coupling arrangement.
Measurement chain
System performance belongs to the correctly matched sensor and electronics, not the cable alone.
Confirm the complete ordering code, supplied scope and installation conditions before replacement.
Recommended model families

More Bently Nevada models

Bently NevadaBently Nevada 330130-070-01-00Bently Nevada 330851-02-000-080-90-01-05Bently Nevada 330104-00-08-15-02-00

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-00Bently Nevada 330906-02-12-10-02-05Bently Nevada 330903-00-07-10-01-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330876-03-10-00-00Bently Nevada 330102-00-12-10-01-05Bently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330854-080-25-05Bently Nevada 330103-02-04-10-02-CNBently Nevada 330854-080-24-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

General Electric / SiemensGeneral Electric IC200UAL006Siemens 6ES5951-7LB21General Electric IC200UDD112

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric DS200AAHAH1AGeneral Electric DS200SHVIG1ASiemens 6ES7143-5BF00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES7144-4PF00-0AB0General Electric IC200UAR028General Electric DS200EXPSG1ABB

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric IC200BEM104Siemens 6ES5541-8AA11Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric DS200PLIBG1AGeneral Electric DS200SLCCG2AGeneral Electric DS200PANAH1A

Separate product references; inclusion does not establish compatibility or interchangeability.

General Electric / SiemensGeneral Electric IC200UAA007Siemens 6ES7142-6BH00-0AB0General Electric DS200SPCBG1A

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / General ElectricSiemens 6ES7144-1JB31-0XB0General Electric IC200UAL004Siemens 6GK5308-2FM10-2AA3

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-1GB31-0XB0Siemens 6GK1143-0TA02Siemens 6GK1143-0AA01

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

200151-40-03-02 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the assemblyRecord the complete 200151-40-03-02 designation and its installed location.
2Confirm the functionConnects the accelerometer interface
3Check mechanical fitPlan the complete 4.0 m route without pulling on either connector.
4Review the interfaceThis item is a cable, not an accelerometer.
5Define supplied scopeList required mounting hardware and accessories separately from the main item.
6Record acceptanceRetain the installation measurements and the completed system checks.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
General ElectricIC200CHS003

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC200UAL005

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC200UDD120

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricDS200SVIAG1A

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricDS200PTCTG1A

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricDS200FHVAG1A

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for 200151-40-03-02 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

200151-40-03-02 FAQ

Is 200151-40-03-02 an accelerometer or a connecting cable?It is an accelerometer interface cable. Sensor sensitivity, measurement range and mounting-stud ratings must not be assigned to the cable.
How is the 40 option of 200151-40-03-02 decoded?For this cable ordering table, 40 specifies 4.0 m. Do not read it as 40 m or borrow a length-code rule from another cable family.
Are both ends of 200151-40-03-02 terminated?Yes. This standard interface-cable type has connectors on both ends, so it is not the single-connector flying-lead version.
Does 200151-40-03-02 include cable armor?The 03 option selects blue cable with armor. It is distinct from the blue unarmored cable selection.
What coupling material is selected for 200151-40-03-02?The final 02 option specifies a nylon coupling nut. It is not the enhanced-grip coupling option.
Can the end connectors of 200151-40-03-02 be assumed to fit any vibration sensor?No. Verify both mating interfaces and the required cable arrangement against the actual sensor and receiving equipment.
What installation load should be avoided on 200151-40-03-02?Do not use the connectors to carry cable pull or unsupported route weight. Support the lead and avoid mechanical strain at its ends.
Does 200151-40-03-02 define the vibration measurement range?No. The sensor and associated electronics define the measurement characteristics. Cable selection must preserve the correct connection and installation arrangement.
What should be inspected if the signal is lost through 200151-40-03-02?Inspect mating engagement, connector condition and the installed cable route with the equipment in a safe maintenance state, then check the complete measurement chain.
What should a replacement request for 200151-40-03-02 preserve?Keep the 4.0 m length, armored construction, two-ended termination and nylon coupling choice together as one complete cable configuration.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
Bently Nevada Accelerometer interface cables

Applications & Why Choose Nordwel

Application and maintenance planning for 200151-40-03-02 in the correctly matched installation.

Application areas

01Accelerometer connectionProvides the interface route between correctly matched equipment.
02Armored installation routeSupports a mechanically protected cable path.
03Cable maintenanceAllows replacement of the defined two-ended cable assembly.
04Connection verificationSupports inspection of mating engagement and signal continuity.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the complete ordering code, supplied scope and installation conditions before replacement.
Need help matching 200151-40-03-02 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp