other
Products
ABB HIEE400995R2 UMB015 BE02 control-board product photographs
ABB HIEE400995R2 UMB015 BE02 control-board product photographs
ABB HIEE400995R2 UMB015 BE02 control-board product photographs

ABB HIEE400995R2 UMB015 BE02 control-board selection reference

EMAIL SALES
ABB UMB015 BE board assemblies
HIEE400995R2 UMB015 BE02 — control-board selection reference

A board-level item for controlled replacement planning in an installed industrial control assembly. Selection requires the complete ordering identity, connection records and equipment configuration.

ABBUMB015 BE board assembliescontrol-board selection item
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
HIEE400995R2 UMB015 BE02 product profile
Product familyUMB015 BE board assemblies
Exact modelHIEE400995R2 UMB015 BE02
Item formElectronic circuit board
Wiring checkConnector and pin assignment
Configuration recordInstalled settings and labels
Acceptance taskEquipment functional test
  • Brand:

    ABB
  • Item NO.:

    HIEE400995R2 UMB015
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

HIEE400995R2 UMB015 BE02 configuration inquiry

Get a precise quote for HIEE400995R2 UMB015 BE02

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

HIEE400995R2 UMB015 BE02 functions and installation

HIEE400995R2 UMB015 BE02 is presented as a control-board selection item. Plan the replacement around the installed equipment records, physical assembly and connection schedule rather than assuming that a similar board designation establishes interchangeability.

Identity reviewMatch the complete item and installed board record.
Connection planningRetain the cable identities and pin-assignment drawing.
Configuration retentionRecord settings and component labels before removal.
Acceptance planningDefine the required equipment function checks before installation.

Installation and selection boundaries

  • A board designation alone does not establish the receiving equipment configuration.
  • Connector fit is not proof of the correct pin assignment.
  • The quotation should distinguish the board from surrounding cabinet hardware.
SYSTEM SELECTION

HIEE400995R2 UMB015 BE02 system selection checks

Manufacturer ABB
Board family UMB015 BE
Component type Electronic control-board assembly

UMB015 BE supplier catalogue descriptions; installed assembly and equipment drawings govern replacement selection.

Pre-order check 01

Installation environment

Use the equipment maintenance procedure and prepare a controlled board-handling area before removal.

  • Isolate and verify the relevant equipment supplies before handling the board.
  • Label the connections and preserve their original positions in the maintenance record.
  • Protect exposed electronics against electrostatic discharge and inspect connectors for damage.
  • Seat and secure the replacement only after the assembly and connection checks are complete.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Complete identity
Compare the full requested item with the installed board and replacement approval.
Mechanical arrangement
Check the receiving position, fixing points and connector orientation on the actual assembly.
Electrical connections
Use the equipment pin-assignment drawing; do not infer an interface from connector shape.
Configuration
Retain the recorded settings, fitted components and any required equipment-specific configuration.
Return to service
Complete the equipment functional test and review alarms before releasing the installation.
Keep the complete board identity, restored connection schedule and completed equipment test in the maintenance record.
Recommended model families

More ABB models

ABBABB HIEE300024R4 UAA326 A04ABB CM576-PNIOABB PM573-ETH-XC

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM595-4ETH-FABB PM591-2ETHABB DO525

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB IIMKM02AABB HIEE400923R1 PMA324 BEABB 3HAC061275-001

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB PM583-ETH-XCABB PM5132-T-ETHABB DI525

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Siemens / Bently NevadaSiemens 6GK1143-0AA01Bently Nevada 330854-080-25-05Siemens 6ES5948-3UA13

Separate product references; inclusion does not establish compatibility or interchangeability.

Siemens / ABBSiemens 6ES7144-1JB31-0XB0ABB PM5112-R-ETHSiemens 6ES5464-8MF21

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-1GB31-0XB0Siemens 6ES5464-8ME11Siemens 6ES5945-7UA23

Separate product references; inclusion does not establish compatibility or interchangeability.

ABB / SiemensABB PM592-ETH-XCSiemens 6ES7142-6BH00-0AB0Siemens 6GK5308-2FM10-2AA3

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-4FF01-0AB0Siemens 6ES5465-4UA13Siemens 6ES7144-4PF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

ABB / SiemensABB PM5072-T-ETHSiemens 6ES5951-7LB21Siemens 6ES7144-4JF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES5541-8AA11Siemens 6ES7143-4BF50-0AA0Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB V18345-1010261001ABB PM5072-R-ETHABB PM591-ETH-XC

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

HIEE400995R2 UMB015 BE02 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the requested boardUse the complete HIEE400995R2 UMB015 BE02 identity on the enquiry.
2Record the installationPhotograph the installed position and preserve the equipment hardware record.
3Map the connectionsLabel cables and retain the connector and pin-assignment schedule.
4Define configuration needsRecord settings and fitted component labels before the board is removed.
5Agree supplied scopeConfirm the board and any separately required accessories on the quotation.
6Plan controlled acceptanceSchedule the equipment checks needed before return to normal operation.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
ABBIM60

A separate product reference; verify its own installation and configuration.

Specialist model
ABBSDCS-UCM-1-COAT 3ADT220090R0008

A separate product reference; verify its own installation and configuration.

Specialist model
ABBPM595-4ETH-M-XC

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7143-5BF00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6ES7144-5KD00-0BA0

A separate product reference; verify its own installation and configuration.

Specialist model
Siemens6GK1143-0TA02

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for HIEE400995R2 UMB015 BE02 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

HIEE400995R2 UMB015 BE02 FAQ

What identifies the correct HIEE400995R2 UMB015 BE02 replacement request?Use the complete ordering identity together with photographs of the installed board and the equipment hardware record. A matching family name alone is insufficient to approve a replacement.
Does ordering HIEE400995R2 UMB015 BE02 include the surrounding control cabinet?The requested item is a board-level assembly, not a complete cabinet. Confirm the supplied board and separately required accessories in the quotation.
What should be preserved before HIEE400995R2 UMB015 BE02 is disconnected?Preserve cable labels, connector positions, equipment wiring references, visible settings and fitted component identification. These records support an accurate restoration of the installed arrangement.
Can the connector shape on HIEE400995R2 UMB015 BE02 identify its communication protocol?No. Connector shape alone does not establish an electrical interface, signal level or protocol. Match each connection to the equipment pin-assignment drawing before reconnecting it.
May HIEE400995R2 UMB015 BE02 be exchanged while the equipment is energized?Do not assume live replacement is permitted. Qualified personnel should isolate and verify the relevant supplies under the approved equipment maintenance procedure before handling the board.
Which mechanical checks are needed before seating HIEE400995R2 UMB015 BE02?Check the receiving position, fixing points, guides and connector orientation on the actual assembly. Stop if the board cannot seat normally; forcing it can damage connectors or the receiving hardware.
Should settings on HIEE400995R2 UMB015 BE02 be changed to match a photograph?No. Retain the equipment-approved configuration and compare it with the installed-board record. A sales photograph is not an instruction for switch positions, fitted memory or equipment settings.
What handling precautions apply to HIEE400995R2 UMB015 BE02 during a planned change?Use an electrostatic-discharge-controlled work area and hold the assembly by suitable edges or supports. Protect connectors and fitted components against impact, contamination and unnecessary contact.
Does similar hardware establish interchangeability with HIEE400995R2 UMB015 BE02?No. Similar appearance or a shared family designation does not prove revision or application compatibility. Replacement acceptance must cover the complete identity and the actual equipment arrangement.
How should the installation of HIEE400995R2 UMB015 BE02 be accepted?Confirm restored connections and the approved configuration, then perform the required controlled equipment function checks. Record the resulting diagnostic state before returning the installation to normal service.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
ABB UMB015 BE board assemblies

Applications & Why Choose Nordwel

Application and maintenance planning for HIEE400995R2 UMB015 BE02 in the correctly matched installation.

Application areas

01Board replacement planningCompare a requested spare with the installed control assembly and maintenance records.
02Connection restorationPreserve cable identities, connector positions and the equipment wiring schedule.
03Configuration reviewRetain the existing settings and component identification during a planned board change.
04Maintenance acceptanceDocument the equipment functional checks and resulting diagnostic state.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Keep the complete board identity, restored connection schedule and completed equipment test in the maintenance record.
Need help matching HIEE400995R2 UMB015 BE02 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
Control, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
Control, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
Control, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
Control, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
Control, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
Control, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
Control, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
Control, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp