other
Products
General Electric IC610CCM105 Data Communications Unit product views
General Electric IC610CCM105 Data Communications Unit product views
General Electric IC610CCM105 Data Communications Unit product views

General Electric IC610CCM105 Data Communications Unit

EMAIL SALES
General Electric Series One
IC610CCM105 — Data Communications Unit

Connect a supported Series One Model E or Plus installation through the DCU serial interface. Confirm the controller version, address and discrete communication settings as one configured link.

General ElectricSeries OneData Communications Unit
Sales managerTiffany Guan
Mobile / WhatsApp+86 18030235313
IC610CCM105 product profile
Product familySeries One
Exact modelIC610CCM105
Supported host scopeSeries One Model E, Series One Plus and 3.7K hosts
Electrical interfaceRS-422
Communication connector25-pin D-type female
Protocol roleCCM slave at the Series One end
  • Brand:

    General Electric
  • Item NO.:

    IC610CCM105
  • Part Number:

  • Weight:

  • Dimensions:

  • Manufacture Year:

  • Place of Origin:

  • Certification:

  • Description:

IC610CCM105 configuration inquiry

Get a precise quote for IC610CCM105

Email Sales
Sales managerTiffany Guan
WhatsApp+86 18030235313

IC610CCM105 functions and installation

IC610CCM105 provides the documented RS-422 communications interface for series one model e, series one plus and 3.7k hosts. The DCU uses a 25-pin D-type female communication connector and four selectable data rates; the controller end operates as a slave in the CCM exchange.

Serial data accessConnects the supported controller to its configured master host.
Electrical matchingUse the documented RS-422 connection and signal wiring.
Communication setupMatch rate, parity and controller address with the host.
Host-range selectionVerify the controller version supported by this DCU.

Installation and selection boundaries

  • Select one of the four documented data rates and match the host configuration.
  • A 25-pin connector does not establish an RS-232 electrical interface.
  • Check the supported controller range independently of serial-port compatibility.
Official product data

IC610CCM105 key specifications

Supported controller range Series One Model E, Series One Plus and 3.7K hosts
Serial electrical interface RS-422
Communications connector 25-pin D-type female
DIP-selectable data rates 300 / 1200 / 9600 / 19,200 bit/s
CPU unit address 1–90
Protocol arrangement CCM master/slave; Series One end is slave
Communication setup DIP-switch configuration

GEK-90477 Data Communications manual and GEK-90842 Series One user manual; user-approved original-manual archives.

Pre-order check 01

Installation environment

Prepare the fitted Series One installation for a controlled exchange.

  • Secure the controlled equipment and isolate the affected controller/DCU supplies before hardware work.
  • Record the fitted revision, host connection, communication switches and CPU unit address.
  • Verify controller compatibility, electrical interface, signal wiring and the actual power arrangement.
  • Restore the configured link and test required host requests and controller-data transfers before release.
Retain the approved installation drawing and record the controlled acceptance checks.
Pre-order check 02

Compatibility confirmation

Match the complete item, actual connections and required installed function.

Controller range
Match series one model e, series one plus and 3.7k hosts and the fitted controller revision.
Electrical connection
Use RS-422 wiring and the correct 25-pin communication connector assignment.
Serial settings
Match the selected rate, parity and other configured communication requirements.
Protocol and address
Retain the CCM master/slave relationship and correct CPU unit address.
Power and acceptance
Check controller/DCU supply loading separately and agree the required data-transfer tests.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Recommended model families

More General Electric models

General ElectricGeneral Electric IC600CB504General Electric IC600CB507General Electric IC600CB513

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB516General Electric IC600CB525General Electric IC600CB536

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600CB537General Electric IC600BF830General Electric IC600BF908

Separate product references; inclusion does not establish compatibility or interchangeability.

General ElectricGeneral Electric IC600BF914General Electric IC600BF915General Electric IC600BF923

Separate product references; inclusion does not establish compatibility or interchangeability.

Additional published brands

Additional Advantage Models

Bently NevadaBently Nevada 330130-075-01-00Bently Nevada 330104-00-08-15-02-00Bently Nevada 330102-00-12-10-01-05

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330103-02-04-10-02-CNBently Nevada 330103-02-08-10-02-CNBently Nevada 330905-00-25-05-02-CN

Separate product references; inclusion does not establish compatibility or interchangeability.

Bently NevadaBently Nevada 330903-00-07-10-01-CNBently Nevada 330903-00-07-10-01-00Bently Nevada 330876-03-10-00-00

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-5BF00-0BA0Siemens 6ES7144-5KD00-0BA0Siemens 6ES7144-4PF00-0AB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-4JF00-0AB0Siemens 6ES7144-4FF01-0AB0Siemens 6ES7144-1JB31-0XB0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7144-1GB31-0XB0Siemens 6GK5308-2FM10-2AA3Siemens 6ES7143-5AH00-0BA0

Separate product references; inclusion does not establish compatibility or interchangeability.

SiemensSiemens 6ES7143-4BF50-0AA0Siemens 6ES7142-6BH00-0AB0Siemens 6GK1143-0TA02

Separate product references; inclusion does not establish compatibility or interchangeability.

ABBABB V18345-1010261001ABB 3HAC061275-001ABB PM5132-T-ETH

Separate product references; inclusion does not establish compatibility or interchangeability.

Every model above links to an existing Nordwel product page. Send the full part number for configuration and availability confirmation. CHECK WITH SALES

IC610CCM105 Order Guide

Check the complete requested item against the actual installation before ordering.
1Identify the itemRetain IC610CCM105 and the fitted revision when agreeing the replacement.
2Match the installed roleMatch series one model e, series one plus and 3.7k hosts and the fitted controller revision.
3Record connectionsRecord the fitted revision, host connection, communication switches and CPU unit address.
4Review operating limitsSelect one of the four documented data rates and match the host configuration.
5Agree the supplied scopeCheck controller/DCU supply loading separately and agree the required data-transfer tests.
6Validate restorationRestore the configured link and test required host requests and controller-data transfers before release.

Middle East Demand & Specialist Models

Selected specialist-brand products requested for regional projects and available on Nordwel.

Compare the complete identity, installed hardware and application requirements before selection.
General ElectricIC600BF940

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF941

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF942

A separate product reference; verify its own installation and configuration.

Specialist model
General ElectricIC600BF948

A separate product reference; verify its own installation and configuration.

Specialist model
ABBPM5112-R-ETH

A separate product reference; verify its own installation and configuration.

Specialist model
ABBPM5072-T-ETH

A separate product reference; verify its own installation and configuration.

Specialist model
Nordwel customer support

Company Services & FAQ

Support for IC610CCM105 selection, quotation and controlled replacement planning.

Company services

Item and application reviewCompare the complete item with the installed configuration and required supplied scope.
Fast quotation supportConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide shipping coordinationConfirm destination, freight option, packing requirements and shipment tracking workflow.
Order follow-upProvide pre-order clarification and shipment-status support through the assigned sales contact.

IC610CCM105 FAQ

Which hosts are listed for IC610CCM105?The documented host range includes Series One Model E, Series One Plus and 3.7K configurations. Match the actual controller identity and revision before selecting the DCU.
Can the Plus-compatible DCU be selected from connector shape alone?Host compatibility is a separate check from physical connection. Confirm the controller version and supported DCU configuration even when the enclosure and connectors appear familiar.
Which serial standard is provided by the Plus-range DCU?The external interface is RS-422 through the documented communication connection. Confirm signal wiring and any required conversion before attaching a host with a different electrical interface.
What data-rate choices are provided by its DIP switches?The four selections are 300, 1200, 9600 and 19,200 bit/s. These are discrete settings, not an unrestricted continuous baud-rate range.
Does a 25-pin D connector mean the DCU is an RS-232 device?No. The DCU communication connector is 25-pin D-type female, but the electrical interface is RS-422. Connector shape does not determine the serial standard.
How is the controller identified in host requests?Use the configured CPU unit address within the documented 1–90 range. The host destination and fitted DCU address must refer to the intended controller.
What protocol role does the Series One Plus end take?It is the slave in the documented CCM master/slave exchange. The master host initiates the required requests and must support the applicable protocol.
What should be compared when the serial link has activity but no useful data?Check the selected rate, parity, unit address and request format against the host configuration. Then verify the required data references instead of assuming electrical activity proves a working application.
Why should supply loading be reviewed separately from DCU communication?The controller/DCU supply arrangement and rack demand are electrical installation requirements. A working serial specification does not establish that the fitted power arrangement is adequate.
What should be retained after the Plus-range DCU is commissioned?Record the complete supplied identity and revision, controller type, switch settings, host configuration and tested data transfers. Keep the accepted values with the installation maintenance record.
Sales managerTiffany Guan
WhatsApp+86 18030235313
ICS TRIPLEX / TRUSTED

Trusted T8000 Series Model Directory

Software, licensing, controller, interface, shield and power-supply references.

Software & Licensing

T8013SOE & Process Historian Software Package
T8017Peer to Peer Communications Software Package
T8019Process Control Algorithm Software Package
T8030SOPC Server Package
T8082DIEC1131 Toolset Suite; Licensed to Hard Drive
T8082UIEC1131 Toolset Suite; USB Port Dongle
T8090MLicense for SIS Workstation 1.0 MED

Controller, Interface & Power Modules

T8100CController Chassis Module
T8111CProcessor Module
T8120CProcessor Interface Adaptor Module
T8121CProcessor Interface Adaptor Module (IRIG-B)
T8122CProcessor Interface Adaptor Module (MODBUS Master)
T8123CProcessor Interface Adaptor Module (IRIG-B and MODBUS Master)
T8151CCommunication Interface Module

Communication Adaptors, Shield & Power Modules

T8153CCommunication Interface Adaptor Module
T8191Shield Module
T8193Shield Module
T8231Power Supply Module
Exact-match links open existing Nordwel product pages. Reference-only models remain unlinked until a matching product page is published.
ICS TRIPLEX / I/O CABLES

Companion-Slot to FTA Cable Selection

Internal cable references for 40-channel input and output connections to field termination assemblies.

INPUT · 40 CHANNEL
TC-201-02-2M5

I/O Companion Slot to FTA · 2.5 m

INPUT · 40 CHANNEL
TC-201-02-4M5

I/O Companion Slot to FTA · 4.5 m

INPUT · 40 CHANNEL
TC-201-02-6M5

I/O Companion Slot to FTA · 6.5 m

INPUT · 40 CHANNEL
TC-201-02-8M5

I/O Companion Slot to FTA · 8.5 m

INPUT · 40 CHANNEL
TC-201-02-10M5

I/O Companion Slot to FTA · 10.5 m

INPUT · 40 CHANNEL
TC-201-02-12M5

I/O Companion Slot to FTA · 12.5 m

OUTPUT · 40 CHANNEL
TC-205-02-4M5

I/O Companion Slot to FTA · 4.5 m

OUTPUT · 40 CHANNEL
TC-205-02-6M5

I/O Companion Slot to FTA · 6.5 m

OUTPUT · 40 CHANNEL
TC-205-02-8M5

I/O Companion Slot to FTA · 8.5 m

Exact-match links open existing Nordwel product pages. Confirm channel direction, cable length and FTA compatibility before quotation.
General Electric Series One

Applications & Why Choose Nordwel

Application and maintenance planning for IC610CCM105 in the correctly matched installation.

Application areas

01Legacy controller data accessConnect the supported controller range to a configured host.
02RS-422 link maintenanceReview electrical wiring and the correct communications connector.
03Host configuration checksMatch protocol requests, unit address and discrete serial settings.
04Communication acceptanceTest the intended data transfers and controller-side behavior.

Why choose Nordwel

Configuration-aware supportReview complete identity, installation conditions and the required application before quotation.
Fast quotationConfirm pricing, availability and lead time against current Nordwel business records.
Worldwide coordinationSupport destination, freight, packing and shipment-tracking requirements.
Dedicated sales contactWork directly with an assigned contact for pre-order clarification and order follow-up.
Confirm the supplied scope, installed revision and required functional checks before operational release.
Need help matching IC610CCM105 to your installation?CONTACT SALES
Need a hard-to-find industrial spare?Send the complete model, manufacturer, quantity and equipment nameplate. Nordwel will cross-check the exact brand, revision, electrical interface and mechanical configuration before quotation.
CROSS-BRAND MODEL SUPPORT

Industrial Spare Parts Reference

Selected legacy and specialist models for motion, sensing, pneumatic and control-system applications.

Motion & DrivesBLS3-4 BLS3Legacy servo/control unit; confirm the full BLS3 designation.
Pneumatic & Process2000018 KA12A10A0 11180747BEKO/BEKOMAT condensate-drain component reference.
Sensors & MeasurementMS2712RZero-speed monitoring device; verify supply and revision.
Motion & DrivesAE100M 200-00182Rotary encoder reference; confirm interface and mounting.
Sensors & MeasurementSFET-F500-L-W18-B-K1Configured industrial sensor assembly; verify the full option string.
Pneumatic & ProcessTZ2LE024PGVAB 074308Configured valve component; confirm coil voltage and port options.
PLC, Power & Communication6ES59417UA12Siemens S5 module reference; confirm the installed rack function.
Motion & DrivesMDX60A0110503400 8226857SEW-EURODRIVE MOVIDRIVE inverter reference.
Sensors & MeasurementPTP35A2A13P1PH4AConfigured process-instrument reference; verify range and output.
PLC, Power & CommunicationHITACHI 33016136-5Hitachi industrial control spare; confirm the host equipment family.
Pneumatic & ProcessNUMATICS 34203626Numatics pneumatic component; verify valve and coil configuration.
Sensors & MeasurementHBM WA/20mm 050310129 090610052HBM displacement transducer with 20 mm measurement reference.
Pneumatic & ProcessFESTO 184518 DPA-63-10Festo twin-piston pneumatic pressure booster.
PLC, Power & CommunicationH920Legacy industrial control spare; nameplate confirmation required.
Sensors & MeasurementPN3093ifm electronic pressure sensor with digital display.
PLC, Power & CommunicationK2001000100MConfigured cable or assembly reference; confirm the equipment family.
PLC, Power & CommunicationPCD3W800Saia PCD3 analog I/O module reference.
Motion & Drives49/F2-10 P 80 B14 B3Configured motor and gearbox assembly reference.
Sensors & MeasurementUB40012GME5V1Pepperl+Fuchs UB400 ultrasonic sensor.
PLC, Power & CommunicationDFR713PLegacy electronic control spare; confirm manufacturer and revision.
Sensors & MeasurementPT/EL-DR-5BAR-S1-HA-TH-SS5 bar pressure-instrument reference; verify materials and output.
Sensors & MeasurementUDS3/200MB/4/20/G1/4E/FConfigured pressure sensor/transmitter reference.
Motion & DrivesVRDM397/50LWBBerger Lahr stepper motor reference.
Pneumatic & ProcessMPPES31410420Festo proportional pressure regulator reference.
PLC, Power & Communication6GK57980SN000EA0Siemens industrial communication accessory; verify installed function.
Sensors & MeasurementWTT280L-2P2531SICK PowerProx time-of-flight photoelectric sensor.
Pneumatic & ProcessMSQB20H2SMC compact rotary table/actuator reference.
Pneumatic & ProcessMSQB30H3SMC compact rotary table/actuator reference.
PLC, Power & CommunicationMCRSLUI0Phoenix Contact analog signal conditioner reference.
Motion & Drives6FX11422BA02Siemens drive/CNC electronic module reference.
No exact Nordwel product pages were found for this reference list. Final supply must be confirmed from the manufacturer nameplate, complete ordering code and installed-system context.
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit
New Products

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

contact

whatsapp